Chevy Nova

The sheet metal will go, but you have to use later bumper, etc. You should stay with pre 73 since style is more popular & parts are easier to get new.

Should be on left side facing motor down at bottom of engine near the fire wall.

You must be at least 46" tall to ride in the front seat (this is what a cop told me when he pulled me over for driving with a child in the front seat). Age does not play a factor, only your height because of the air bag.

1962

The 350's from 1987 up are fuel injected.

230 cu. in. six was standard and I believe the 283 V8 was an option.

the pins just drive out and the new ones drive in, just prop the door up first and drive 1 pin at a time out and replace it.

yes they did.

depends most chevys came stock with 2.89:1 ratio in the dif. however the easiest way to find out exactely what our vehicle has is to remove the dif cover plate and count the teeth on the ring gear, write that down, count the teeth on the pinion gear write that down and then divid the ring gear by the pinion gear.

it is called "driven divided by drive" an example if your ring gear had 37 teeth and your pinion gear had 9 teeth, it would be 37/9 which is 4.11, so you would have a 4.11:1 gear ratio in your dif.

230 cu. in.

For a 1967 Chevy Nova, the wiper motor wiring typically includes a three-terminal configuration: one for power, one for low-speed operation, and one for high-speed operation. The motor usually connects to a switch that controls the speed and function of the wipers. You can find detailed wiring diagrams in repair manuals or online resources specific to classic cars. Always ensure to double-check the wiring against a reputable diagram to avoid any electrical issues.

Go to manheimgold.com and figure out the price.

Broken rings, rings not installed on pistons correct, No valve seals

Bad are worn valve guides.

The early 71s had 9 to 1 with a 74 cc head and a 1.72 inch valve. they changed the pistons to 8.5. So if your rebuilding an early 307 and its got flat tops in it, its got 9 to 1. If you got dishes or little bowls in the pistons its got 8.5 to 1.

Replace water pump for an 1986 Chevy Nova?

how to remove a 1966 283 engine from a Nova

You have to get up under the dash, and they go in with twist in sockets, to the back. I think their number is 194.

Because Nova in Spanish means no-go.

5 qts. with a new filter.

depends on the ignition system you're using. Hei

This website here has a list of wheel/tire fitment for all years of Novas. I hope this helps you out. http://www.2quicknovas.com/tirefit.html

The voltage regulator is located in the alternator

With a small block, and a TH350, glass hood, (the stock one weighs a ton) and Weld wheels, with the heater, and wipers removed, half tank of gas, and no spare, without driver, with frame connectors, ladder bars, and a 6 point cage, 2753. That is the closest I can come.

3200.00 lbs

.017, or a matchbook, works great. Once running, 30, to 35 degrees dwell.