answersLogoWhite

0

📱

Computer Programming

A category for questions about computer programming and programming languages.

10,506 Questions

How do you write a flash program?

Action Script 1.0 to Action Script 3.0 depending on the version of Flash you are using.

What does the acronym JIC stand for?

There are a lot of things it can stand for. A partial list:

* Joint Information Committee * Job Instruction Card * Joint Information Center (US Government) * Jubail Industrial College (Jubail, Saudi Arabia) There are more for sure.

What is a teardrop in computer terms?

A DoS attack where fragmented packets are forged to overlap each other when the receiving host tries to reassemble them.

PLC ladder diagram for boolean function?

The process of converting control objectives into a ladder logic program requires structured thought. Boolean algebra provides the tools needed.

You can get the product at projuktiponno

How do you make screen shots?

Press the button Print screen sysrq..if you have laptop than it should be probably only sysrq on one of the keys.You can than paste it in paint and save file.

I'm trying to do a system recovery on my hp and I get this message...INF file txtsetup.sif is corrupt or missing status 14 Setup cannot continue Press any key to exit What's that mean thanks?

it means that you have a corrupt registry and you need to reprogram your unit. I am sorry but this is the only way to fix this kind of problem

Dustin Atrat

MSIT,

What is X windows environment?

ambot sad nimo uie Mao na ako assignment... tan awa imong lobot naa'y answer... j3j3j3j3j3

What is Normalization of pointers?

The 8085 had a 16-bit address bus thus it could address a maximum of 64KB of memory (2^16). The 8086 had a 20-bit address bus and could therefore address a maximum of 1MB of memory (2^20). To maintain compatibility, segmented memory was introduced, such that the segment and offset were stored in separate 16-bit registers. In order to perform 20-bit pointer arithmetic upon the 8086, the segment and offset had to be normalised by the compiler to produce a valid 20-bit address. This was achieved by left-shifting the segment by 4 bits and then adding on the offset.

The 8086 also introduced the concept of near, far and huge pointers. A near pointer only stores the offset while far and huge pointers store both the segment and the offset. The only practical difference between far and huge pointers is in how pointer arithmetic works. With far pointers, only the offset is affected whereas with huge pointers, both the segment and the offset are affected.

How do you code a simple C plus plus program to remote shutdown computers?

Any code that remotely controls another computer is far from simple. The simplest method would be to write a client-server application, where the client runs as a service awaiting a shutdown instruction from the server. However, it goes without saying that a network administrator would take a dim view of employees remotely shutting down other employee's computers.

Why must the stack pointer be initialized at the beginning of every program?

Because the stack pointer marks the top of the stack. If it is not initialised, it is not possible to determine where the next stack frame will go.

What is meant by 'oops upskirt'?

The term 'oops upskirt' is a term that is used to refer to a situation where a girl's skirt rides or goes up revealing her under garments. It is often viewed as embarrassing.

What does the hashtag mean in programming?

In programming, specifically in C and C++, the hashtag (#) is used to include files into the main program and to create macros.

What is the use of attributes in Net programming?

An attribute is a powerful .NET language feature that is attached to a target programming element (e.g., a class, method, assembly, interface, etc.) to customize behaviors or extract organizational information of the target at design, compile, or runtime. Attributes provide a powerful method of associating metadata, or declarative information, with code (assemblies, types, methods, properties, and so forth). After an attribute is associated with a program entity, the attribute can be queried at run time by using a technique called reflection.

Niranjan Kumar

Can you mute the learning Odyssey?

Yes you can just get a hacker for it. (sarcasm) So in other words not that I know of.

Where do you find the program Google as your computer does not have this program?

Google is not a program, it is a search engine. It is freely accessible from the internet using a browser of your choice. Just type Google in the address bar or select it from the search engines available in the browser itself. for more information, look up 'search engine' in your browser's online help (F1 key).

What is a 'word' in computer language?

In computing, a word is the basic unit of data for a particular architecture. For instance, on a 32-bit system a word is 32-bits long (equivalent to 4 bytes). On a 64-bit system a word is 64-bits long (8 bytes).

Computer languages that use a native WORD data type will typically reflect the underlying architecture. For instance, a PASCAL WORD is typically 32-bits long on a 32-bit system. However, it should never be assumed that this is always the case. For instance, C++ does not have a native WORD data type, but it is often included as a user-defined type and is often the equivalent of a C++ short (meaning short word), which is typically only 16-bits long on a 32-bit system.

Note that in computer languages, it is never safe to assume the length of any data type is going to be the same length on all architectures for all languages. For this reason, all computer languages include a built-in sizeof() operator or an equivalent function that will determine the actual length of any given data type. Thus in C++, sizeof( WORD) will tell you exactly how long the user-defined WORD data type really is (in bytes). In PASCAL, the SizeOf() function does the same thing.

What are the limitations of system analysis and design?

some of the limitations of systems analysis and design include:

-complexity and scope of the system

-technological changes

-financial issues

-presence of few systems auditors

What is cobol and c language?

Common Business Oriented Language/ COBOL is widely used programming language by businesses. While C is a general purpose programming invented by Dennis Ritchie.

What do you use to replace Lotus Notes workflow applications?

In your Dreams. Lotus Notes will forever be Lotus Notes

---

Lotus Notes has two main functions one is as an email client. This could be replaced by something like outlook or similar. The other is as a webform routing and database tool. There are severall more advance workflow engines on the market today found a places like http://www.webandflo.com or http://www.workflowpatterns.com/vendors. There is no method however to directly upgrade from Lotus notes and have your functionality preserved in some other system.

11-07-2010

I'd like to add some information to this answer, while I don't think it is complete. I agree that Lotus Notes will remain, but the reality is that there is always a wave in companies who migrate from Lotus Notes to another platform .... and back after some years :)

Besides this, Lotus Notes has many functions, only describing mail and webform routing is not sufficient. The lists of possibilities is endless (workflow, instant messaging, web conferencing, mail and webmail, etc.

For companies who want to phase out there Lotus Domino environment (and for example workflow applications) we support them with our Notes to QOL service. Although the environment is phased out the content and the functionalities remain and it is suitable to cooperate with any type of platform. For more information feel free to contact us: kim.vandenberg@lialis.com

What is queueing in network?

Several computers attempting to connect to the same router at once, router processes one, then the next, then the next, etc..

What is difference between job queue and ready queue?

Ready queue contain all the jobs that are ready to execute.so the job queue and the ready queue are one and the same.

What should you use to clean a keyboard?

Just get a can of compressed air that's all it takes not all the steps listed

1. Flip your keyboard and shake it few times. Crumbs and other small pieces should fall out from under keys.

2. Use a compressed air to blow dirt etc. from under keys.

3. Use a dry rag or special damp wipes (you can buy them in computer or office stores) to wipe a surface of your keyboard.

Why does not use FIFO in stack?

A FIFO, or First In First Out is a queue.

A stack is a LIFO or Last In First Out.

Trending Questions
Linear voltage of thermocouple 20mv to 50mv temperature between 750 to 1250 degree Fahrenheit how much voltage will be generated at 1000 degree Fahrenheit? What is modeling language? Why multithreaded programming is beneficial over single threaded programming? What are the three ways you could modify a typical input or output environment to enable people with disabilities to use the computer system? There is a long queue at the primark store Charlie is 4th from the front and 9th from the end How many people are there in the queue? What is the unit substitution fault finding technique? How would you design an algorithm for reversing two adjacent entries on a stack if you were given three stacks and you were only allowed to move entries one at a time from one stack to another? What is macro teaching? Passing two dimensional arrays into functions in C programming? Is Visual Basic included with Visual Studio? What are 6 meaning characters in search string in Linux? How can change language of a whole software program? Is Penniston's binary code somehow different from regular binary code? Why it is important to use potholders in holding hot objects? Which do you prefer service oriented or batch oriented solutions? What are difference between A and AO algorithm? How do you convert numeric value into alpha value in c plus plus programming language? Why linear search is called sequential search? What is the difference between BIT and Bcs Degree? You will come to find that everything that makes life possible on earth is all?