answersLogoWhite

0

📱

Consumer Electronics

Ask questions here about the electronics you use every day: from phones and computers to kitchen appliances and radios.

4,952 Questions

Where could you get reaper cloth?

  • in soul silver it is on route 28 when you go to the Pokemon centre go down and surf the pokeball will be a reaper cloth

When was the video tape invented?

Video tape recorders have been around since the early sixties, but the first machines were for broadcast studios. The VHS tape standard was invented in 1971 by JVC, and the first home VHS VCR was introduced by JVC in 1976.

Can apartments facing north receive satellite signals?

It is possible for apartments facing north to obstruct satellite signals. Any dwelling to the north of the apartment building might have their satellite signal obstructed if the building is very tall.

Challenges of Bluetooth technology?

Here are a few limitations of Bluetooth:

1. Speed. Bluetooth is not designed for high-speed data transfers.

2. Range. The range of communications is often limited to a few feet (I've seen as few as 2 and as many as 30).

3. Compatibility. Some devices do not have profiles compatible with the devices you want to connect with.

What is a LDR used for?

An LDR (light-dependent resistor) is a particular type of semiconductor (A material with a conduction rating in between that of a conductor and an insulator i.e. electricity flows through a semiconductor slower than through a conductor, but quicker than through an insulator).

Consider an atom as made up of just a nucleus with bound electrons. These electrons require varying amounts of energy to 'escape' from the atom. The semiconductor, as all known matter, is made up of atoms.

Light can currently be explained as being made up of packets of waves called photons where the frequency of these waves determines how much energy they are associated with (Energy = h * frequency: where h is a constant).

Therefore, if light associated with enough energy strikes the semiconductor, then the electrons requiring the equivalent energy to break the bonds will escape.

Electricity is concerned with a flow of electrons, therefore electrons escaping means there is an increase in electrical current.

This increased electrical current is equivalent to a drop in resistance and thus fluctuation in particular frequencies of light affects the resistance of the semiconductor.

Is voltage measured in volts?

Voltage, along with electric pressure, electric tension, and electrical potential difference is measured in units of electric potential. This can be joules per coulomb or volts.

Answer

First of all, there is no such thing as a 'voltage difference'. Voltage is already a 'difference', as it is an alternative name for 'potential difference'! 'Voltage difference', therefore, would mean 'potential difference difference', which makes no sense!

The unit for potential and potential difference (voltage) is the volt, which is equivalent to a coulomb per second.

Who invented satellite communication?

Inmarsat. They were originally used for ships in distress at sea.

What is honey's viscosity?

Honey has a high viscosity. Viscosity is a measurement of internal friction or thickness so honey would be more viscous than say water for example.

Can a 9V 300mA adapter be substituted to 6V 300mA adapter?

Yes, here is an example of what the 300 or 1200mA does for you. The voltage is 9 and that won't change. The mA is the demand you put on that voltage. If you have a spot light that needs 1200mA and you connect a 300mA your light will light up but will be dim, plus you will overheat the adapter. But with the required 1200mA it will be bright and stay bright. Most electronics have a built in system that will take what it needs, if you use the 1200mA it should only take what the demand is in this case it should be 300mA but never the other way around. You can provide more mA's never less.

How many apple products were invented?

there have been over 100 million apple products produced

What year was the Blu-ray invented?

October 2008
The first Blu-ray Disc titles were released on The PS3,. The earliest releases used MPEG-2 video compression, the same method used on DVDs. The first releases using the newer VC-1 and AVC codecs were introduced in September 2008.[20] The first movies using dual layer discs (50 GB) were introduced in October 2008[21]

see: http://en.wikipedia.org/wiki/Blue-ray#History

How do you send songs to my phone?

You can send music to another phone in a variety of ways, depending upon the phone's capability. It is possible to send music files by email, Bluetooth, infrared or by using a memory card.

Where can you download songs without a credit card?

Answer

download limewire or kazza or morpheus

limewire is being sued so its not a good choice at the moment, and kazaa has spyware in its programs. I haven't tried morpheus though

How do you program a uniden bearcat bc248clt?

you don't , it's programed with freqs

Programming BC350C scannerPlease reference the link below. Programming the scanner begins on page 24. The link provides a page that allows you to view it in .pdf format.

How much do electrician get paid an hour?

In London the average basic pay is £26,000-40,000 not including overtime ect... That's for a qualified city and guilds electrician

In the USA it depends on the location. An independent electrician may be in the $25 to $60 and hour range. For a larger company you may pay $60 to $100 an hour.

When was automatic doors invented?

Horton Automatics/ Dee hortohn and Lee Hewitt in 1954

How do you program a bearcat bc65xlt scanner?

Turn on the radio

Press the "band" button

Keep pressing the "band" button until you come within the parameters of the frequency that you want

Let the radio scan until it gets close to the actual frequency that you're looking for

Press the "hold" button and use the arrow "up" or "down" button till you lock in the correct frequency

Once you have the frequency locked in, press the "program" button

Press the "private" button

The unused channel will be flashing

Press the "program" button, this locks the frequency into that channel

Continue this process until all of the frequencies are loaded into the radio

When was the snooze button invented?

The snooze button was invented in 1959. Westclox began putting that feature on their clocks because some individuals needed to be awakened a few minutes before they actually has to get up.

How do you increase resistance?

Since resistance is the ratio of voltage to current, if the voltage is constant then increasing the resistance will result in a reduction in current.

When was the reel invented?

The Chinese invented the first reel in the 12 th century.

What year was surfing invented?

It was invented as a show of talent in Ancient Polynesia, the best surfer was usually the tribal chieftain. ---- Surfing was invented in order to help the younger generations of fisherman learn how to deal with waves. This way when they grew up they would be able to successfully navigate the shoreline without their boats tipping over, having them lose their precious cargo. Then probably out of boredom (sponging sucks) they started standing up instead of lying down and then you get the sport of surfing. There are many accounts of this happening in fishing villages all over the world Sal Tome, India, Fiji, Philippines. So it is unsure who really came up with it first but this is why it was invented.

What are some words that describe an iPad?

An ipad is a mini computer that you can carry around where ever you go.

You can touch the screen to navigate through the different places that you downloaded onto it.