0
DVD Players
A DVD player is an electronic device that plays discs manufactured under the DVD-Audio and DVD-Video technical standards. It was invented in 1994 and since then, it continued to thrive and evolve, with successors including HD DVD and Blu-ray Disc players.
1,816 Questions
Since the signal is sent pre-mixed into the surround sound receiver as a Dolby Digital stream, you will have to turn down the rear channels at the receiver. All good receivers should have a channel level adjustment control through a menu or on the remote control.
"Cordon Bleu is a Dish made with Chicken and ham and cheese. Often the chicken is stuffed with the other ingredients and cooked with a breading. It can be baked or fried, and also is available in frozen prepared form."
How do you unlock your Sony dav-dz 275 player?
If you mean 'unlock' as in play discs from different regions, there is no region unlock for this model. If by 'unlock', you mean reset the parental control password, all Sony DVD's can be reset by entering 199703 when there is no disc in the player.
Does ripping a DVD disc damage it or is it like ripping a CD onto the computer?
It is safe it does not hurt it
Is there a region hack for Technika aedvdrhdds7?
I bought a dvdfawo8 from tesco I am an electronics Eng and as I could not find a region hack took it apart so as to get chipset & component Information as most players come from common factorys & are just rebranded with slight differences for differet manufactures in different countrys.Technika uses a different chipset from other manufactures the multi remote controls bought at chainstores do not work with them.
The player is very well built & good value for money only thing it does not do is play MP3's. To my amazement the components appear to be made in India of very high quality but the codeing as stated is different so region change does not appear to be possible on technika DVD players. Unless somebody knows better.
video cable is always yellow connections on electronics are also color coded
Ge universal remote rc24914e and you need the code for a sony DVD player dvp-ns400d?
MANUALLY ENTERING CODES
1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to
program.
2. Press and hold the CODE SEARCH/SETUP button on the remote
until the INDICATOR LIGHT lights, then release.
3. Press and release the button for the device you are programming
(TV, VCR, DVD, etc.). For AUX, press AUX then the device button
you are assigning to AUX. The INDICATOR LIGHT will blink then
remain lit.
4. Enter the three or four digit code for your device using the number
buttons in the GE Universal Remote. After your code is entered the
INDICATOR LIGHT will turn off.
5. Aim the remote at the device (TV, VCR, DVD, etc.) and press the
POWER button. Your device should turn off.
Note: If your device does not respond to the first code listed,
repeat steps with the next code. If none of the codes listed for your
device work for your device or your brand is not listed, try the Code
Search method described below.
USING CODE SEARCH FUNCTION
If your TV, VCR, DVD, etc. does not respond after you have tried all the codes
for your brand or if your brand is not listed, try searching for your codes by
following the steps below.
1. Turn on the device you wish to program.
2. Press and hold CODE SEARCH/SETUP until the INDICATOR
LIGHT lights, then release.
3. Press and release the device button for the device you are
programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will
blink once then remain lit. For AUX, press AUX then the device
button you are assigning to AUX.
4. Press and release POWER until your device turns off. Wait at least
2 seconds between each time you press POWER. Important: You
may have to press POWER up to 250 times.
5. When your device turns off press the ENTER/SAVE button. The
INDICATOR LIGHT will go off.
Why do I only have sound and not the picture when the DVD player is hooked up to the TV?
Try changing the source on the television to AV1 if you only have sound but no picture from a DVD player. If it is on TV it will not play a DVD.
Would a HD DVD play on a DVD with HDMi?
To play a HD DVD you need a HD DVD player. A standard DVD player will not play a HD DVD, nor will a Blu-ray player.
HDMI is just a connection: it won't give your standard DVD player superpowers.
Why you have no sound when recording with the rca input sound on the toshiba DVD recorder dr6?
Go to the DVR's set-up screen and see if it has an option for selecting the audio inputs for recording. It may also have separate recording volume level controls whichg are turned down. Just guessing here, but that's the best place to start.
CCTV (closed circuit television) and computers can work very well together, depending on your choice of video cards and software. You can use several different methods of getting a CCTV signal into your computer and there are several choices of free software to allow you to record on your 'puter. It all depends on how elaborate you want to get.
Where can you purchase a VHS or DVD copy of the movie From Hell To Texas?
If you aren't against shopping online, I would recommend Amazon.com or Ebay.
The lense may just be dirty from months of use so you might start by purchasing a DVD player cleaner kit from your local retail store they run about ten to twenty dollars and one pass of the cleaner should do the trick if not try it a second time
What retailer sells a dvd recorder player?
There are a lot of retailers that sell dvd record players. Some would be Amazon, consumerresearch, Best Buy, Walmart, overstock, nextag as well as many other places.
Why is a DVD player a better decision than a BluRay player?
A DVD player is a better decision than a BluRay player based on price alone. This type of player is cheaper. A BluRay player may be a better idea because it can also play DVDs and has more advanced features.
