0
Ford Focus
The Ford Focus is a compact family car produced by Ford. It was initially introduced in Europe in July 1998, then entered the global market in February 2000. To date, there are more than 9.2 million Ford Focus sold worldwide.
4,083 Questions
Where is the valve to add r134 refrigerant on a 2007 ford focus?
If it's like the 2001, it's in the right front wheel well, behind the front of the tire. If you don't know what you're doing, don't add freon. You will introduce air into the system and you will ruin your compressor. You need gauges to do this, and the know-how.
Where is the fuse for the back up lights on a 2005 ford focus?
Automatic transmission vehicles: Fuse #40 Standard shift vehicles: Fuse #53. Both fuses located behind the lower edge of the drivers side dashboard.
Is there a reset for the battery light in a 2005 Ford Focus?
NO. The battery light as you call it is actually the charging system light. If it is staying on the charging system is not working properly. More than likely the alternator has failed. It really has very little to do with the battery.
Where is the fuel filter on a 2005 Ford Focus ZX5?
I don't know if it is the same as the ZX5 but the fuel filter in my 2005 ford focus ST has the fuel filter in the fuel tank, because it is an automatic. A manual has the fuel filter in the fuel line and you should be able to find it by following fuel line.
Where is the emergency fuel cut-off switch for a 2001 Ford Focus?
On the RHS of the passenger footwell behind a cover - check your owner's manual!
Where is the coolant temperature switch on a Ford Focus zetec engine?
There is no such thing as a: temperature switch, on your Ford focus, the coolant temperature sensor is located on the front of the engine.
Where is the AC low pressure side port on a 2000 Ford Focus located?
The low pressure service port for the AC is located in front of the firewall on the passenger side just under and to the left of the passenger side windshield wiper motor. It has a green cap labeled "Evap Low Pressure Service Port. 1 PSI MAX." WRONG - don't do it
Answeri think it is under the plastic cover on the fender Another VersionWow! There must be significant differences on the 2000 Focus vehicles! On my daughter's car I finally tracked down the low side service port which is mounted on top of the receiver-dryer. This device is well hidden, and I was only able to find it by tracing the plumbing -- no easy task in the engine compartment's crowded spaces.The good news is you don't even have to open the hood. You cannot get at the low-side port from the engine compartment on this vehicle. The receiver-dryer is mounted beneath the fender directly below the right front headlight bulb and about 6-inches in front of the right front tire.
To get at it you have to remove the four fasteners holding the wheel splash guard -- the plastic shield that forms the "ceiling" for the wheel well. On this car there were three of those horrible plastic fasteners and a single steel screw holding the shield. The screw is located at the forward lower edge of the wheel opening on the fender. At the opposite lower edge (at the rear of the wheel opening) is a plastic fastener pointing upward. With the steering wheel cramped full to the left you can then see the other two plastic fasteners on the inside of the well and just to the rear of the center of the wheel. IF YOU REMOVE WHEEL IT'S LOTS EASIER. The heads on the three fasteners are Phillips slotted, but I had no success whatever getting any of them to unscrew. I finally pried them out using a fine-bladed screw driver and a pliers -- damaging them somewhat in the process. If you pry out the plastic screw the rest of the fastener comes out easily using your fingers. It turned out I was able to reuse all three of these fasteners to reassemble the splash shield.
Once the shield is loose you can work it free (there is a slotted guide on the upper edge of the fender well) and the shield can then be lowered somewhat to the tire. With it in that position you can now move the forward section out of the way far enough to see the receiver-drier and the low-side service port. There is a protective plastic cap screwed onto the service port fitting.
When reassembling the splash guard be sure to align the upper slot before replacing any of the fasteners.
Another versionI think the ""Evap Low Pressure Service Port. 1 PSI MAX."" is not the port to re-charge the AC. It does not fit the recharger I bought at the mart store. The 3rd answer I think is right. I removed the splash guard and there was a port with a black cap near a "cylender" type thing. I recharged my AC a bit (it was just at the low mark on the recharger I bought) and it works better now. Thanks for all the help guys!Ryan
Another versionHa ha ha, I just charged my AC in my Ford Focus 2000 SE, 4 door sedan. It was located right in front of the front right wheel under the fender. Great now we can feel the breeze in the car. I didn't take off my tire. I jacked up little bit and squeezed my hand in between wheel splash guard and AC freezer bottle and took off the black cap. Rest was very simple. Thanks guys.VanyaStart by having the fuel filter changed.
Does a car need antifreeze to turn on?
no but if in the winter you do not put in the car the engine will freeze you can also use water during the summer No!
Where is the map sensor on Ford Focus?
Its located behind the intake manifold between pipes 1 & 2 (from the alternator side). do you have a picture of it
What is the wiper blade size on a 2006-2007 Ford Focus?
The 2006-2007 Ford Focus takes 22" driver side, 19" passenger side, 14" rear on hatchbacks and 10-11" rear on wagons. See sources and related links below.
Where is the EGR Valve on a 2001 Ford Focus ZTS?
This is general information for people with EGR valve issues: - The EGR valve- on any car- is a small cast metal assembly connected between the intake manifold and the exhaust manifold. Its purpose is to sense high-carbon emmissions in the engine exhaust. If high enough, the valve opens and recycles the dirty exhaust back into the intake manifold, to be re-burned in the engine. If it's working properly, having an EGR valve cuts your output horsepower by about one third, because you're burning dirty air in your engine. - An EGR valve either works or it doesn't. If it doesn't, it needs to be replaced, not cleaned. Cleaning can remove some of the carbon and other deposits inside the valve, but not enough to do any good. It's also just about impossible to do any real cleaning of the sensor, which is the most important part. - If you know your way around your car's engine, look for a place where the intake manifold and the exhaust manifold seem to be hooked together. What's joining them is the EGR valve assembly. It isn't 'plug and play', but is usually mounted with four bolts. There's also a gasket underneath the assembly to provide a tight seal. If it's damaged or missing, that needs to be replaced, too. - About the only time anyone thinks about an EGR valve is when their car flunks the emmissions portion of the state vehicle inspection. Of course, they want to try to replace the thing themselves, to save money. That can happen, if they are at least a little mechanically inclined and have simple hand tools- wrenches, pliers, etc. Other times, it's better to have a mechanic do it and eat the cost, just to be sure it's done right. - The last EGR valve I replaced was in 1999, on a 1991 S-10 short block. Never having done it before, I fumbled around a little and the job took about 45 minutes. The new EGR cost $57 at Consumer Auto Parts.
How do you change the wipers on a 2007 Ford Focus?
The 2007 Ford Focus has hook-end wiper blade arms. There's a little tab or button where the wiper blade is inserted into the hook. Press tab and pull wiper blade out of hook. Sometimes you have to rotate and flex the blade a little bit to allow enough clearance. See video below.
Why does your Ford Focus TDDI MK1 shake whilst you accelerate?
If it's the engine, you probably need a tuneup. This consists of new spark plug wires and plugs. Do NOT gap the plugs. If you do, you will ruin the platinum coating and they will misfire. Make sure you keep the firing order correct, or you will get more of the same... shuddering.
How often should you change spark plugs on Ford Focus?
According to the owners manual, they have platinum plugs that should be changed at 100,000 miles.
Mass Air Flow Sensor on focus 2005?
right below the intake box on top, you remove the 2 screws and hose clamp and it pops out revealing the MAF sensor
How do you change front wheel bearing on 2000 focus SE?
I'm not sure how to change them, but you nay want to call your local Ford dealership as the 2000 Focuses had recalls several years in a row for the wheel bearings. You may be able to get them replaced for free.
What is the tire for 2005 Ford Focus zx5?
The S & SE models use a 195/60-15
The SES model uses a 205/50-16
Should be listed on the drivers door post.
Where is the part where you put the freeon in on a ford focus 2001?
The A/C port is located inside the left front fenderwell behind the plastic wheelwell liner. Remove the left front tire - detach the plastic wheelwell liner from the back of the wheel well - you will find the A/C/ port mounted to the sheet metal.
