Laptops

This type of problem can be tricky, but can be narrowed down fairly quickly. First thing to do is plug an external monitor into the VGA connector on your laptop. It will be a 15 pin connector. Toggle your screens using the "FN" button and the button that shows a monitor icon or says "LCD/Monitor depending on the brand of laptop you have. If the external monitor fires up with no lines then you can safely assume that the integrated video adapter/card/GPU is fine. If the external monitor has the lines, then it is safe to assume that the card is shot and you will typically need a new mother board because the cards are integrated into the boards in most cases. Some newer laptops have FRU (Field replaceable unit) cards and can be swapped out, but generally that is not the case. Back to scenario one. If the external is OK then your LCD panel is probably shot and needs to be replaced. The inverter does not typically cause this problem, but certainly would be a cheap place to start. They are about $15 and are easily replaced. Just Google "replacing a laptop inverter" and you will find numerous resources Also, check that the LCD connector plug is properly seated in the interface slot on the motherboard. With all computer troubleshooting, start with the simple things and progress through the process to more complicated causes. Hope that helps. If you need a new laptop we have them.http://tiny.cc/OhP8t

because it broke. or your laptop broke, and well maybe if not that, try to reset yo laptop, might work

Yup!!

That's what I do, and it runs fine. You just need a laptop with good specs.

But FlightGear will run fine on most laptops. Even with an Intel GMA it will run, just don't expect good framerates on the ground.

I recommend using a laptop with a good GPU, preferably one with an ATI Radeon or Nvidia GeForce.

Not all do. A ground terminal is a safety feature.

Yes, it is much safer when we use the laptop.

The first battery-powered laptop to have a VGA-compatible display was the Compaq SLT/286, released in 1988.

Go to the bluetooth area in your laptop. See if your laptop recognizes your vizio tv. If not your laptop may not have the hardware for bluetooth.

The price of a laptop power supply cable can vary depending on the brand and year. Some Dell power units start in the $15.00 to $20.00 range where others for Acer and Toshiba can be slightly more expensive in the $30.00 to $40.00 range. Cable Wholesale and Cables To Go have the best prices on new and refurbished cords.

If I base it with their performance, M645 is better than R705. M645 is quieter and does not heat up easily. The feature is really meant for personal use or for school. There is no big difference with the price when I check it through online, so I'll choose M645 with Processor Intel Core i5 i5-450M / 2.4 GHz with Max Turbo Speed 2.66 GHz, Features Intel Turbo Boost Technology and so many features. If you want to get the details, I'll add it in related links.

I assume you mean why won't the mouse work? The mouse pad is just a pad placed underneath some mouses (or mice) to improve their operation.

If your mouse is not working, it'd help to have some more information on what type of mouse it is. If it plugs into the computer, check it is plugged in correctly and into the correct port (usually a USB port) and ensure the cable is not damaged. If it is wireless, make sure it has new batteries correctly inserted into it (assuming that it uses batteries), etc. Again, it'd help to know what kind of mouse you have before I could help, as there are many different types and each type operates in a different way.

EDIT: Sorry, just noticed this was posted under laptops, and realized you might have meant the touchpad you find on most laptops. If that's what you mean, then I'd guess the problem probably isn't something you could fix yourself - if the problem is that the laptop touchpad isn't working (and you've tried restarting the computer a few times) I'd suggest taking your laptop to a computer technician.

I'm not a an expert by any means, but I did work for an ISP for a few years working customer service. When you purchase the laptop make sure it has a wireless card. (If you are getting a MAC, I really don't know.)

If you already have some sort of highspeed internet access you'll need to have at least a 1.5Mbps connection speed to really appreciate a wireless connection. You'll also want to find out if your current equipment broadcasts a wireless signal. You should be able to call your ISP and ask them. If the router/modem does not broadcast a signal you'll want to either purchase an adapter at like Bestbuy or Walmart, if your devise is new enough. If you have an older devise you should just purchase a new piece of equipment that does broadcast a wireless signal. Once again contact your ISP, you'll want to make sure your new modem/router is still compatible and supported by your ISP.

I always say less equipment is better, if there's ever an issue later it's easier to eliminate the problem if you only have one piece of equipment. Once you have a wireless signal broadcasted in the home your computer should pick up the signal and ask for some information. I would recommend contacting your ISP or the support department for your router if you need additional assistance configuring the wireless connection.

If you do not have an ISP, just pick one out and let them know your needs. I always suggest sticking to someone with local free support. Never go with an ISP that isn't willing to sit on the phone and answer all of your questions, regrdless of how simple you may think they are OR how many times you ask them.

yes they will

Easier said than done. I have spent a huge amount of time trying to do this. It isn't possible to do the way that you are describing because of technical differences between the landline phone network and the cellphone network. It should be possible, and I don't understand why no one has made something to do this, but it wouldn't be simple. If you want wireless internet access on your laptop through your cell phone, try Verizon's broadband service. It is expensive, but I haven't found any other way to do it; let me know if you do. -DJ Craig

I think she uses a HP EliteBook Tablet PC.

On Windows XP, right-click you background (desktop)> Go to screen saver tab> click power options> and there you can change when your computer goes to sleep

No, your laptop battery does not have to be the same brand as your laptop, but be cautious about purchasing 3rd party batteries from unknown companies.

A laptop consists of two shapes, each an approximate cuboid, that are hinged together. If they were exact cuboids, the answer would be 12 sides. But they are not. The "sides" are curved, which complicates matters.

Connect a cable from your speaker output to your microphone input. Use a sound recording program like Audacity (available online for free) to record the sound as it plays. Since the input and output impedances are different, you have to keep the output volume extremely low otherwise it will be very distorted.

The official website for HP is www.hp.com. From there you can explore the products they have to offer (i.e. compaq laptops).

Sony Vaio laptops are both a full HD laptop, and a touchscreen tablet. The ease, and portability of a tablet have been combined with the comfort of a full keyboard laptop. These "ultrabooks" are an upgrade from traditional laptops that provides a duality that many users need.

The HP Pavilion G6 series has a unique keyboard and mouse configuration. The touch pad is an unique one with several effects. The keyboard is Chiclets keyboard which is very soft and comfortable to type. The keyboard has a NUM-Pad too... the only con is that the arrow cursors are too small.

An indicator measures angular displacement. A common error with this device is called cosine error when the angle of the measurements are not correct.

You will need an s-video cable and that's about it.

Plug the cable into the laptop & into the back of the TV. Power up the laptop and the tv and set the tv to view the proper input signal.

The laptop may not send a signal to the svideo port until you tell it to. Look for a key marked "Fn" This is called a function modifier key, and pressing it in concert with other keys on the keyboard trigger certain hardware functions.

There will be a series of keys that have little subscripts or icons printed on them, ususally in the same color that the "Fn" key is printed with. Look for one that has a little picture that looks like a tv screen. Pressing Fn and the screen button will cycle the laptop through several display modes, one of which will be s-video output.

Note that S-video will not send the audio to your tv, for that you will need a separate cable.

One can replace an LCD screen by following detailed instructions on You Tube and eHow sites for your particular screen. Essentially one needs to release the broken screen from it's moulding, unclip it from the connectors and insert the new screen. However, connections differ for all screens and one should get proper instruction before commencing.

Do control alt and the up arrow key.

IF that doesnt work.......

go to control panel and figure something out