What is the minimum number of satellite speakers needed for a wireless surround sound system?
The minimum number of satellite speakers needed for a wireless surround sound system is three. Traditionally there are two to the sides of the seating area, and one directly in front.
If the speakers have 4 ohm single voice coils, you need to wire them in parallel** instead of in series. To do this, simply jump from the positive terminal on one speaker to the positive terminal on the other, and from the negative terminal on one speaker to the negative terminal on the other.
If the speakers have dual voice coils (two sets of positive and negative on each speaker) then they must be wired differently. If they have this configuration and your final impedance is reading 8 ohms, that means that they've each got dual 2 ohm voice coils.
To achieve your 2 ohm load at the amp, then, you have to wire each voice coil on a single speaker to each other in series** in order to raise the impedance of each speaker. You do this by connecting the positive from the first terminal to the negative of the second terminal. After you have done this on each speaker, you now have two speakers with an impedance of 4 ohms.
Now connect the two speakers by connecting the remaining terminals in parallel, meaning positive to positive and negative to negative. If you followed these directions correctly, you now have a final impedance of 2 ohms for the set.
Spesco is the importer's name.
The R12 was an inepensive revolver made in west Germany by Reck. Reck began making inexpensive pistols in the 1950's.
There were two basic patterns of RECK revolvers, one a single action western type and the other a double action type. The GCA of 1968 ended their importation.
Reck was bought out by Umarex and fireams production gave way to gas, alarm and starting pistols.
Review Sharper Image Noise-cancellation Headphones shp-920?
Comfort - average
Ease of use - average as long as you carefully read the instructions provided
Sound quality - poor. I tried mine on four different devices and although they connected to each just fine the sound reproduction on each device (including the built in FM receiver) was more mono than stereo. Very poor sound separation. If you don't care about the stereo effect these are the headphones for you, however if you're looking for sound quality overall, pay a little more and get a better quality product.
1000 MB makes 1 GB. 1000KB makes 1 MB, and 1000 Bytes make 1 KB. :D
Can a 350 watt amp power 2 10inch subs 250 watts rms each?
depending on your amps rms, i wouldnt suggest it.
Assuming mb is megabits and GB is gigabytes:
612.3 Mb (in bits) = 612.3 * 1024 * 1024 = 642,043,084.8 b
1 GB (in bits) = 1 * 8 * 1024 * 1024 * 1024 = 8,589,934,592 b
8,589,934,592 / 642,043,084.8 = 13.079 (to 3 d.p.).
yep, thats what its made to do...
How do you fix an coby mp3 player if it cant turn on even with a new battery?
there is a small hole at the back that saids reset on it take tooth pick and stick it in then it will reset itself
You deleted all the music files from your player and now how to download them?
Unless you deleted them from the mp3 player, you can easily find your files. Most of the time, when you right click something and choose delete, it only sends the file to the recycling bin. So all you have to do is go to the recycling bin and search for it. Or go on the internet and press control + h to access history. Then find the website you downloaded from.If you deleted it from an mp3 player,then you're pretty much screwed.
When was the first 78-rpm record made?
1894, even though the first records varied in rpm (from about 60-100).
How do you wire amp to 1 ohm load?
need more info but I'll give it a shot and hope i answer your question.
You will need one of the following to get your desired ohm load:
1- single voice coil at 1 ohms
2 - single voice coil at 2 ohms wired + to +, - to -
2 - dual voice coil at 4 ohm all wired + to +, - to - so that you only have 2
wires conected to the amp.
hope this helps.