0
Plymouth Breeze
The Plymouth Breeze was a four-door sedan manufactured by Chrysler Corporation from 1996 to 2002. The car is easily identifiable by its distinct ridged taillights that integrated the turn and reverse signals into it.
529 Questions
Where is the starter located on a 1998 Plymouth breeze?
On a 1998 Plymouth Breeze, the starter is located on the driver's side of the engine, near the transmission. It is positioned towards the bottom of the engine, making it somewhat difficult to access without raising the vehicle. You'll typically find it mounted to the engine block, just above the transmission bell housing.
How do you install ac compressor bypass pulley on 1998 Plymouth breeze?
To install an AC compressor bypass pulley on a 1998 Plymouth Breeze, start by disconnecting the battery and removing the serpentine belt. Next, unbolt the AC compressor from its mounting brackets and carefully remove it from the engine bay, ensuring any associated components are also detached. Install the bypass pulley in place of the compressor, securing it with the appropriate bolts. Finally, reattach the serpentine belt following the correct routing and reconnect the battery.
Where is the horn fuse in a 1999 Plymouth breeze?
In a 1999 Plymouth Breeze, the horn fuse is located in the fuse box under the dashboard on the driver's side. To access it, you'll need to remove the fuse box cover, where you can find the diagram that indicates the specific fuse for the horn. Typically, it's labeled as "horn" or similar. If the fuse is blown, replacing it should restore horn functionality.
Need help bypassing the ac compressor on a 98 plymouth breeze?
To bypass the AC compressor on a 1998 Plymouth Breeze, you can remove the drive belt from the AC compressor pulley and either replace it with a shorter belt that bypasses the compressor or use a belt routing diagram to adjust the belt path. Make sure to disconnect the battery before working on the vehicle and check the new belt's compatibility with the other components. Additionally, ensure the AC system is properly sealed if you plan to return to normal operation in the future.
Why does your 1998 Plymouth Breeze dies when the air is on?
If your 1998 Plymouth Breeze dies when the air conditioning is on, it could be due to a few potential issues. One common reason is that the AC compressor is putting too much load on the engine, causing it to stall if the idle speed is too low. Additionally, a failing idle air control valve or vacuum leaks could affect engine performance when the AC is engaged. It's advisable to have the vehicle checked by a mechanic to diagnose and resolve the issue.
How do you change the thermostat on a 1997 Plymouth breeze?
To change the thermostat on a 1997 Plymouth Breeze, first ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the radiator hose connected to the thermostat housing. Unbolt the thermostat housing, take out the old thermostat, and replace it with a new one, ensuring the gasket is in place. Reassemble in reverse order, refill the coolant, and reconnect the battery.
