Trees

Balsa wood is natural it comes from the Balsa tree

The Swedish Bark Gauge is a small tool used to measure the bark of hard barked trees. It has a chisel end that is pushed into the bark with a flange that reads the thickness.

Hobby shop.

inda

A ficus is a plant belonging to the genus Ficus, these include the rubber plant.

As having burned wood for heat during the last several winters I have experienced burning of the wood from a Horse chestnut tree. I had half of one go down in my yard, and the following heating season, I burned the wood from that tree. It has a very pleasant aroma, which is kind of difficult to surmise, but one can get a sense of nostalgia from it. It heats and burns relatively long, but does not burn as long as a hard oak. I would still recommend someone burn Horse Chestnut, if they desired a good, long-lasting, great smelling hard wood to burn, this would be an ideal candidate!

I came to the same problem with a bridge that i made... if you want a light model Eg. model airplanes you can simply soak tissue paper with glue and wrap around the wood. then you can use super glue to re-enforce places likely to break. If you are building a bridge or somthing of the nature soaking the wood itself with a glue - water mixture can help fill pores which will make the wood itself stronger... also instead of meeting egdes and having corners barely touch, try overlaping the wood.

Not unless it is sprayed on the foliage.

no

you can put the mixture in water, the wood will float and the rocks will sink.

beans on toast with a glass of milk or cup of tea depending on the day of the week and cercumstances.

WEDNESDAY IS A TEA DAY BTW ;)

Surround the stump with a heavy ring of rock salt. It's a goner.

Northern California

The coastal redwoods are in northern California and the Giant Sequoias in the Sierra Nevada mountains in central California.

Lumbermen use the term softwood to refer to conifers. Since birch is not a conifer, it is not softwood. Birches at the northern limit of their range are hard and quite useful for making violins and piano soundboards. At the south end of their range, Robert Frost liked to climb them until they would bend over and take him down to the ground so they probably were soft!

furniture, outside decks, timber framed houses, and anything where rot resident wood is necessary.

Aspen , being a deciduous tree, provides a hardwood.

Sequoia

(Passion Fruit Tree) ?

Ref: http://www.orangetree.com.au/

balsa wood is a type of grain that is....?!!

Palm fronds are defined as compound leaves - large, divided leaves - of a palm tree.

According to The Engineering Toolbox mahogany species have the following densities: African 31-53lb/cubic ft; Honduran 41lb/cubic ft; Cuban 40lb/cubic ft; Spanish 53lb/cubic ft.

Water has a density of 62.43 lb/cubic ft.

In other words yes mahogany floats. I also droped a piece of scrap mahogany marine grade plywood I had in my basement (I build boats) into a pan of water and it stayed on the surface.

it all depends on the span,u can cut down on the size of your joist by putting a mid span beam most likely an lvl. The smallest you can use safely most of the time is a 2x8.most common is probably a 2x10,but if you are spanning more than eight feet without a beam then you should look into tgi joist, they are manufactured joist to carry a certain load and the lumber yard can tell you which ones you will need when you go for a take off list. your best bet is to talk to you town building inspector before buying anything The most common wood used for joists is SPF (spruce, pine, fir)

You have to pollinate the plant first (drag pollen dust to it) and then you have to wait for the seeds to grow. When the seed appears in the box on the far left, you just drag the seed to your seed box or seed storage.

Maple is a hard wood (from a leafed tree) and pine is a soft wood (from a conifer). In this case both wood also have the described character (hard vs soft) not always the case.

u cant do that