How do you save music to memory stick?
There's two ways you can do this.
1. - Find where you want to download it from.
- right click on the link
- go to save as...
- save it in your memory stick's drive and that's it!
2. -Download all your links to wherever you want
- go to all your downloaded files
- right click
- click send to >
- > Then click on the drive with your memory stick.
How do you use a memory stick as RAM storage?
Plug in you USB flash drive to the USB port and go to MY COMPUTER, then RIGHT CLICK on the DEVICE and click on READY BOOST
How do you remove Write Protection from a disc?
it depends on what type of disk if it is a 3.5 inch floppy then there is a tab on the corners that can be moved up or down. if you can see through it , it is write protected if not it can be used.
What is turbine windage protection?
when steam flow blockage occured in steam turbine due to damage of blades/nozzles than steam temperature will increase so protect the turbine from high temperature this protection is introduced.
Yes, external hard drives are an ideal solution when you need more storage than a flash drive can provide. External hard drives offer much larger storage capacities than flash drives, ranging from 500GB to 8TB or more. They also offer faster transfer speeds and are more reliable than flash drives. Additionally, external hard drives are typically more affordable than other types of storage solutions such as cloud storage or NAS systems. My recommendation:𝕙𝕥𝕥𝕡𝕤://𝕨𝕨𝕨.𝕕𝕚𝕘𝕚𝕤𝕥𝕠𝕣𝕖𝟚𝟜.𝕔𝕠𝕞/𝕣𝕖𝕕𝕚𝕣/𝟜𝟙𝟙𝟠𝟞𝟞/𝕗𝕒𝕟𝕜𝟙𝟡𝟟𝟚/
How many files will 16gb hold?
That depends. A 16 gigabyte flash drive will hold up to 16 gigabytes. Every single file on your computer is a little different in size. You could have 16 one gigabyte files, or one 16 gigabyte file, or one 6 gigabyte file two 1 gigabyte files two 2 gigabyte files and one 4 gigabyte file.
Why does my 1994 Chevy s10 blazer shift into 4 wheel drive low but not into 4 wheel drive high?
four wheel drive actuator less then $50 online at http://www.autozone.com. the four wheel drive actuator is basically an electronic hub locking system. replacing this part should fix 'er up!
p.s. i have a '94 s10 blazer vortec v6 same problem and it worked!
Does a thumb drive attach to a computer through the USB port?
"Yes, a thumb drive connects to your computer via the USB port. It is essentially the same as a flash drive as it acts as an external storage device."
The Universal Serial Bus or USB was co-invented by Ajay Bhatt.
How do you write flash actionscript?
Its just like most other languages that are compiled you first need to work with an editor tool(ideally one that is capable of compiling the script) - for example the flex editor or any Adobe Flash Editor CS3 and up will enable you to code in actionscript 3.0
by the way if you want a jump start check out my site it has over 5 hours of free (and after that if your still around there is a monthly fee to see it all). There is over 17 hours of content targeted as building blocks to expand your skills in programing from 0 to really knowing all the basic foundations.
How do you move bios setup for a motherboard from a disc to a USB and still allow it to boot?
You cannot move the BIOS into a USB device. I think you meant the boot order/setup. To do so, enter your BIOS settings page when you switch on your computer (you have to press ESC or F8 or some other key depending on your motherboard). Then search for some option labelled something like Boot setup or boot order. There change the preference from your current boot disc (where your OS is) to the desired USB device. Note that your USB device should have a boot loader to correctly boot the OS stored on it.
What is analyzing requirements?
You put it into a USB port in the computer, and the computer will recognize it as a drive, for example, the H drive, and you can drag files on or off of them, and they are rewritable so items can be taken on and off without having to buy a new flashdrive, unlike the CD. They must be ejected safely through the computer, or files may be lost on them forever.
How do you put a '91 Jeep Cherokee Sport into 4 wheel drive?
my '91 was a beast to get in to 4WD but by using the following procedure it was fairly easy. with the vehicle running, apply the foot brake and put the transmission in neutral. with your RIGHT hand, pull back on the transfer case handle until it will no longer move easily (its not in 4WD yet). once you get to this point, put the transmission in drive while at the same time pulling the rest of the way on the transfer case handle. the handle should "slip" right in to 4WD. good luck!
Can you install Steam on a USB and if so how?
No you can't. Even if you could, no USB would be large enough to hold it, even if you only had a small amount of games.
Why isn't my psp charging from my USB?
well if you onlu have you computer connected to the psp because its only a data cable you nned that wall charger that you get with it to charge it and then choose usb mode THEN you can start to charge it on your computer
How you connect pen drive to the taperecorder?
I don't think you can. If it's a digital tape recorder, you can always transfer the file to a computer and then from the computer to the pen drive.
(LIFE SAFETY WARNING! [disclaimer]
Electricity is dangerous!
You can be injured or killed!
Improper installations can cause fire, injury and death!
Meanwhile, CALL A LICENSED ELECTRICIAN!
- - - - - - - - - -
Mastery of the art of troubleshooting is the measure of the knowledge and skill of an electrician.
It is the knowledge of how electricity works, and of the methods and materials used to create a functional wiring system, that enables a skilled troubleshooter to locate the problem and repair it.
Where should the "voltage" be, and how does it get there?
When you understand that, you will understand what is keeping it from getting where it should be...
The only reason there is "not enough voltage" somewhere is because there is a partially open connection providing resistance and a location to allow a voltage drop [bad splice, bad switch, bad breaker, broken wire, burned splice, ...].
If five [5] of the six [6] outlets in the room don't work it is because there is an open conductor somewhere!
I expect, since there are 6 outlets, that this is a big, relatively new house. Since it has a master bathroom [I assume this is the root of the reference to a GFCI], it is not an inexpensive starter home.
The bath GFCI is very likely [absolutely in a newer house] on a separate appliance circuit, which is why it still works.
It is possible, but unlikely, that the sixth receptacle is on the same circuit as the five that don't work [most electricians don't wire circuits that way]
You may have a tripped/bad breaker or there is a bad/failed connection at a device [often because a "speed-wire" connection - those little stab hole terminations - in the back of a device has failed]
And remember that it can be the hot OR the neutral that is open!
: IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS. If you do this work yourself, always turn off the power
at the breaker box/fuse panel BEFORE you attempt to do any work AND
always use an electrician's test meter having metal-tipped probes
(not a simple proximity voltage indicator)
to insure the circuit is, in fact, de-energized.
Is it possible to lock a USB device?
Yes it is only possible to lock it with an"Imagination"USB stick