answersLogoWhite

0

Wind Power

Wind power is derived from the conversion of wind energy to become a useful form of energy to propel ships, make electricity or pump water. Wind is a renewable source of energy that is widely available and produces no harmful emission during operation.

2,489 Questions

What is better a two bladed turbine or a three blade one?

Power transfer is made through these blades. The more surface area the more power.

How many wind turbines are there in Palm Springs?

There are five wind farms in Kansas, USA, with a total of 1028 turbines.

  1. Caney River Wind Project
  2. Ironwood
  3. Meridian Way
  4. Post Rock
  5. Smoky Hills Wind Farm

Where does wind power have to be sited?

in an area that is windy because if it isn't the wind turbine will just go off energy not wind

A2: Choose a location you own or can lease, that is close to your house or the grid where you can sell the energy to. You want the site to be as windy as possible, with consistent winds. You want to survey the wind to see what the maximum winds are but most importantly how consistent they are. This will help you design it. People always make sure wind turbines can handle the maximum winds, but how much power will it produce over the year? Probably higher in winter and lower in summer. But I would guess even if you choose a windy place you might only get 12 percent of your rated capacity. A local power station has a 600 KW system but it only produces 72 kw on the average per year based on 13 years of service. They could have chosen a better site and they did when they purchased 10 new 2.4 MW wind energy systems this year.

To summarize: You want to choose a location based on your Wind Survey. Find out the site which is most convient to you that produces the most energy per year for you.

Why does electric fan and light click when power is turned on?

I am going to guess that you are talking about a ceiling paddle fan with remote control (the remote being either hand-held or in the wall box) The click sound you are hearing is likely the click of the relay in the electronic control module inside the ceiling fan. This module contains the actual power relay that turns the power on and off. There is one relay for the fan and another for the light. When you press the on-off buttons on the remote, it sends a radio signal to the control module and activates the relay. You can't hear the radio signal but you hear the relay click.

Renewable resource used for the generation of electricity?

Renewable sources of energy include the sun (solar), wind, water (hydro), tidal, wave, geothermal and biomass.

What is better coal or wind to make electricity?

Evaluate the statement – “Wind is better than coal!”

To start, Wind energy has many advantages. It is a renewable source which means it will be able to not run out which makes it more reliable rather than coal. In 2016 the energy created was more substantial than coal for the first time. It does not pollute habitats with dangerous chemicals and the manufacturing machines won’t stay although wind turbines take up a lot of land, that could be used for more housing.

The wind is everywhere which makes it suitable for turbines to turn into energy, all over the world. The turbines themselves need a generator to create power however it does take over 7,000 pounds just to install one fan.

Not only is wind power an abundant supply but it also provides electricity without burning any fuel or polluting the air. It keeps it safer for endangered habitats and It’s cheaper to position.

Countries all over the world have been using coal for over 3,000 years. It was founded in China in 200 BC and was then sold to different countries for money. Factors take up so much land and spread harmful chemicals to animals which can ultimately lead to mutations.

Overall, Wind is an effective and efficient way of extracting electricity and in the future a more renewable way to save the plants habitats.

What would be the best material to make a model windmill paper and wooden sticks balsa wood or styrofoam its also has to make a small light bulb light up?

I had to make an model of a windmill for class and I used a wood block, magnetic wires, a couple magnets, a couple nails, a paper towel roll, and glue

What percentage of electricity in the US is produced by oil burning power plants?

In 2010, less than 1% of the electricity generated in the US was produced by oil burning power plants. Hawaii and Florida are the states where most of the oil burning power plants are located. This likely is because the the energy source, oil, is cheaper to transport to distant offshore locations than other sources, like gas or coal.

19.3% of electricity in the US was produced by nuclear fission in 2005.

49.7% came from coal-fired power plants, 18.7% from natural gas, 6.5% from hydroelectric, and other minor contributions from other sources.

See the source of this information under the Web Link to the left.

Can wind be produced on a large scale?

I guess, but why would you want to? There is no shortage of wind.

What mood is conveyed by the phrase wild winds blow?

The phrase "wild winds blow" conveys a sense of power, intensity, and unpredictability. It suggests a feeling of being surrounded by strong gusts of wind that are turbulent and uncontrollable.

How to make a working model of a windmill with procedure?

A working model of a windmill is easy to construct from popsicle sticks. Simply place four popsicle sticks across each other at angles. Then put a nail through the middle of the sticks to attach them all together making the hole a little bigger than needed. Attach to a base.

How does a Windfarm operate?

Wind blows through it, the turbines spin. Electricity is generated and fed into the grid. Somewhere there's a meter counting up the energy delivered, for which the owners of the wind farm eventually get paid.

What are the dangers of offshore and onshore winds?

Offshore winds will blow the unwary captain onto shoals or reefs.

Onshore winds will blow the unwary captain away from his next landmark or landfall.

How many wind turbins can be put on 15 acers?

The number of wind turbines that can be installed on 15 acres depends on several factors, including the size of the turbines and local regulations. Generally, small to medium-sized wind turbines require about 0.5 to 1 acre each, while larger turbines may need more space due to their height and safety setbacks. On average, you could fit between 15 to 30 smaller turbines on 15 acres, but it’s important to consult local guidelines and conduct a site assessment for precise planning.

How much does a windfarm cost?

A windfarm would cost alot depending on how many windturbines you buy. Where you build your windfarm , is the purpose of how much you will pay.

What is a wind machine with blades?

A wind machine with blades is so called a wind turbine, or a windmill.