0
Drawing
This category is the nuts and bolts of applying what the eye sees to the medium of paper. How to information, techniques of drawing, and design essentials are found in this section. Various papers, pencils, pens, and other accessories are also addressed in this category.
2,427 Questions
Handicraft a productive hobby?
The importance of arts and crafts in a society include the encouragement of tradition and the passing on of historical arts. Arts and crafts are also important because they allow other cultures to share the beauty.
Draw two curved lines parallel to each other, then draw an oval in between the lines. Draw a pupil in the middle, then shade it in to the right. Draw another oval: small. This is some lighting.
For the pupil, draw a curved line attached to the left side of the oval. Now fill the top gap in. After lightly shading in the bottom with color or grey pencil, thicken the first lines you drew. Draw eyelashes of your choice. And BAM! your done!
If you want to learn how to draw eyes go to deviantart.com
If you didn't understand any of that then check this - Mark Criley is great, he helped me loads when I first started out. Good luck :)
http://www.youtube.com/watch?v=3zh9GYCFe-0
There are several ways to draw an octagon. Here is a way to do so on a drafting board:
- First draw a circle with a diameter the same as the width of the octagon.
- Second use the T-square to draw two horizontal lines touching the top and bottom of the circle.
- Third use the right triangle to draw two vertical lines touching the right and left of the circle.
- And finally use the right triangle again to draw four lines touching the four "corners of the circle.
- Draw a square in the size of desired octagon and draw 2 diagonals through the middle (forms an X)
- Place a ruler from the crossing point to one corner and make a mark.
- Than place (turn) ruler parallel to the edge and make a mark of the previous measurement
- Repeat for each of the lines starting from the center of X and for both sides. It should give 8 marks in total. (4lines x 2 directions)
- Draw line between marks closest to each corner, forming triangles.
What are the skills of sketching?
Sketching is a basic building block of an artist's talent. Like any other thing you do, art takes practice, and you practice by sketching.
Sketch anything and everything your see. Keep a sketchbook and drawing materials with you wherever you go, and don't be afraid to take them out and use them.
Your sketches help you to develop your ability to capture your subject. They help you to develop your perspective and proportion and they become a source of future work and are also an excellent record of how and how much your talent has changed, grown and progressed.
What are the dimensions of a half sheet of poster board?
The dimensions of a half sheet of posterboard are 11 X 28 or 22 X 14, depending on how it is halved. A full sheet of posterboard (naturally) is 22 X 28 in.
The Etch-A-Sketch contains very fine aluminum powder, which sticks to the glass. The knobs are connected to wires and pulleys, which move a plastic stylus vertically and horizontally. The stylus scrapes a tiny amount of the aluminum powder off the glass, leaving a visible line. If you draw all over the screen and clear away all the aluminum powder, you can see the mechanism inside.
What some of the types of drawing?
A sketch that will help you identify the one you’re meant to be with, so you don’t let them pass you by.
I’ll enter a state of deep trance and “talk” to the universe to give you…
A photorealistic drawing of your perfect match.
A detailed description of their personal characteristics.
And a description of how and when you’ll get acquainted.
Many were completely shocked to see that their ideal partner looked exactly like the sketch they had.
Like Maria from Brazil, who told me…
“I made a new years resolution to finally find my soulmate and settle down. But I wasn’t really sure how to do it. Swiping on Tinder and Bumble just wasn’t getting me anywhere.
So I decided to have my perfect match sketched out for me.
I got a great sketch and prediction of how we’ll meet. Dancing lessons. Then I forgot about it.
A couple of months later I was shocked when I saw him at my salsa class.
The sketch I had gave me the courage and confidence I needed to make things happen.
Now we’re happily married and looking forward to our first child.
Can’t thank you enough!
Maria H.”
Why different scales are used when producing working drawings?
Judges the distance between places so you know how far things are
When you look at a drawing how do you know if your looking at an inch or millimeter drawing?
this should be specified on the drawing somewhere or in the title block
What is the significance of drawings?
Drawing has no purpose other than to satisfy the pursuit of higher intellect.
Drawing is also used for communication, an example would be writing a letter, yes the alphabet is a form of drawing , putting instrument to paper could be concidered drawing, although we call it writing to discern it from drawing, things other than letters and numbers, again during comunication. Drawing is more widely used as a form of expression, a way to take ideas , and thoughts, and putting into reality, that is to see , other than in our minds.
Yes, pencils exist. They are used for drawing and creating diagrams, and can be erased by a rubber.
How many drawings has Terry Redlin Drawn?
Terry Redlin is famous for his tremendously popular oil paintings, mostly depicting wildlife against the backdrop of nature at twilight. In the 1990's U.S. Art Magazine named him America's Most Popular Artist eight years in a row.
you start out with a tree stump. then build on from there. When drawing tree branches you use not perfecly straight lines. move in swift motion. add little branches on from side branches.
well I usually start off with a nice round circle......then I dot 2 eyes and a mouth and make an upside down v for the nose.....hope that helped....
Portrait drawing is IMHO the highest genre of realist and representational drawing. The most effective way to begin a portrait drawing is by first establishing the outside shape of the head and then fixing into place the major landmarks such as the brow ridge, base of the nose and width of the face.
Portrait drawing requires a skill level that really needs to be both acquired and hone.
A site that I use to get free portrait drawing lessons is http://www.artacademy.com. I'm sure one of their lessons will get you started on the right track.
How do you make a star of David?
The star of David is two triangles placed one within the other, one resting on it's base, the other standing on it's point. The triangles are equilateral triangles which means that all sides are equal.
What are the styles of letters?
Styles refers to the choices that are made when creating a letter. What kind of text formatting will you use? The three main styles are Block, semi block, and modified block. This refers to how the lines appear on the page.
Block will appear with all sentences aligned with the left margin.
Semi Block can have the salutation aligned with the right margin, and the body of the message as in block.
Modified block can have the salutation and the signature line on the left, and the body of the message as in block.
There are other things to determine in the style of the letter. Do you emphasize words by using bold or italics? There are many such choices when composing a letter, capitalization, use of commas versus indentations, etc.
There are many different kind, you have to make them the way you want them. There's Italics, Bold, Bubbles, Flowers, Balloons, Cursive and more!
What are some fun things to do when you are bored?
- when you are bored go to nexon click maple story and donload it.
- IT is very fun
- Make up poems or songs about your boredom
- Find silly videos on Youtube
- Take a company that has been getting on your nerves - find out who the person is that you should write complaints too. Write a letter to them with the most trivial or confusing complaint. Ensure you talk in circles so that the letter is well written but extremely confusing
- Turn on the T.V., put it on mute and make up dialogue
- Answer meaningless questions
- Have a jello eating contest and eat with your hands behind your back
- Write a letter to someone using only letters cut from newspapers and magazines.
- collaborate on a story with a friend
- People-watch at the park and make up stories about the interesting people you see.
- Take photos of things that look like all 26 letters IN ORDER. Then put all of the pictures together on a piece of poster board.
What three sides do you see on an isometric drawing?
name three basic dimensions of orthographic drawing
What is the difference between civil and architectural drawing?
The main difference is industry the CAD is aimed at. But really if you break it all down into its simplest form there is no difference. CAD is CAD. Its all just lines and circles.
But if we look at the actual software we find there are specific softwares related to specific industries for instance AutoCAD Revit Suite (fantastic btw) caters for 1)Architectural 2)Structural 3)Mechanical, Electrical and Piping. Its a program split into 3 but interconnected (check it out) but the use of the program and functions are all the same.
However if you really mean mechanical as in part modelling then there is a huge difference.
AutoCAD Revit is an area of CAD called Building Information Modelling (BIM) this is where everything is basically library based in its simplest form. A huge parametric library of components is added to lines and points you've drawn on a plan. The properties of these components are then altered through a specific list of possible configurations and editable variables.
Solidworks on the other hand is another form of CAD which is the one I think you mean by mechanical. But really you can do any type of modelling with it if you know what your doing. Solidworks is a dimension based part modeller. It can create solid parts, surface parts, sheet metal parts and much Much MUCH more. In this type of CAD you take an idea or a sketch (more commonly a doodle) and create a custom part from scratch. There are libraries involved in there too but for the most part its usually from scratch.
Both types have their own specific simulation systems. And their are other abilities each of these CAD types can do but I just wanted to scratch the surface or else this answer would be a proper report!
What kind of drawing is 3D drawing?
A 3D drawing is when you use shadows and a sense of depth to create space. making the drawing more convincing and ugly.just kidding more real i meant.
An old method of reproducing drawings that wound up with the copies being blue background with the lines in white. The original drawing was fed through rollers with the blank paper that exposed it to light. Then the blank paper was devleoped by exposing it amonia---very smelly process. The paper would develope into a blue color and the exposed lines were white---usually.
Isometric drawings, 3-D representations, are drawn on an angle to the parallel to show how the finished product should look. All dimensions should be the same as if drawn flat (2 dimensional).
