answersLogoWhite

0

Buick Century

This category covers questions about the Buick Century, a line of full-size luxury models from the Buick division of General Motors. The name originated from the British slang for exceeding 100 mph as "doing the century." The Century is sold as the Buick Regal in Japan as Toyota Motor Corporation claims rights to the name "Century" there.

2,073 Questions

How do you replace a fuel pump on 2002 buick century custom?

To replace the fuel pump on a 2002 Buick Century Custom, start by disconnecting the negative battery cable and relieving the fuel system pressure. Then, remove the rear seat to access the fuel pump access panel, or, if necessary, lower the fuel tank for direct access. Disconnect the electrical connectors and fuel lines from the pump, remove the retaining ring, and replace the old pump with the new one, ensuring all connections are secure before reassembling. Finally, reconnect the battery and check for leaks before starting the vehicle.

Where do you replace a turn signal flasher in a buick skylark?

To replace the turn signal flasher in a Buick Skylark, locate the flasher unit, which is usually found under the dashboard, near the steering column, or in the fuse box area. You may need to remove a panel or cover to access it. Once located, disconnect the old flasher by pulling it out and insert the new flasher into the same socket. Ensure it's seated properly, then test the turn signals to confirm it's functioning.

How do you remove the Buick century hubcap?

To remove the hubcap from a Buick Century, first, ensure the vehicle is parked on a level surface and the parking brake is engaged. Use a flat-head screwdriver or a hubcap removal tool to gently pry the hubcap off, starting at one edge and working your way around. Be careful not to damage the wheel or hubcap during the process. Once loosened, you can pull the hubcap off by hand.

Are the parts for a 98 Buick century the same as a 2000?

The parts for a 1998 Buick Century and a 2000 Buick Century are not entirely the same, as there were some design updates and changes made between these model years. While many components may be interchangeable, it's important to verify specific parts, especially for critical systems like the engine, transmission, and electrical components. Consulting a parts compatibility guide or a professional mechanic can help ensure you get the correct parts for your vehicle.

What does code mean eng high 128 351 00 on your 2007 freightliner century?

The code "ENG HIGH 128 351 00" on your 2007 Freightliner Century typically indicates a fault related to the engine's performance or emissions system. Specifically, the "ENG HIGH" suggests a high engine parameter, which could be related to issues like high coolant temperature, excessive exhaust temperature, or a problem with the fuel system. It's important to consult the vehicle's service manual or a professional mechanic for accurate diagnosis and resolution. Additionally, using a diagnostic scanner can provide more detailed information about the specific issue.

How do you replace cv joints on a Buick Century?

To replace the CV joints on a Buick Century, you'll first need to lift the vehicle and remove the front wheel for access. Next, detach the axle nut and remove the lower control arm or tie rod end to free the axle from the hub. Afterward, you can pull the axle out of the transmission and replace the CV joints, reassembling in the reverse order. Make sure to use new axle nuts and torque them to the manufacturer’s specifications for safety.

How do you replace the fuel pump located on a 1996 Buick Century?

Well, replacing a fuel pump on a 1996 Buick Century is like painting a happy little tree. First, you'll want to relieve the fuel pressure by disconnecting the battery and removing the fuel pump fuse. Then, you can access the fuel pump through the trunk or by dropping the fuel tank. Just remember, take your time and follow the instructions carefully like a gentle brushstroke on a canvas.

Where is the engine coolant drain plug on a 2001 Buick century?

Well, hello there, friend. I believe the engine coolant drain plug on a 2001 Buick Century is located at the bottom of the radiator. It's a small valve that you can open to let the coolant drain out. Remember to work gently and take your time, there's no rush when taking care of your car.

Why does your 1992 Buick century run for 15 to 20 minutes then shuts off?

There could be several reasons why your 1992 Buick Century is shutting off after running for 15 to 20 minutes. It could be due to a failing fuel pump, a clogged fuel filter, a malfunctioning ignition coil, or an overheating issue such as a faulty thermostat or radiator. I recommend having a professional mechanic perform a diagnostic check to determine the exact cause of the issue.

How do you adjust the headlight aim on a 2001 Buick Century?

Well, darling, to adjust the headlight aim on a 2001 Buick Century, you'll need to locate the adjustment screws on the back of the headlight assembly. Use a screwdriver to turn the screws and adjust the aim of the headlights up or down as needed. Just make sure you're not blinding innocent drivers on the road with your newfound lighting prowess.

What is the difference between a 15th century caravel and a ship built in the 20th century?

Oh, dude, like, a 15th century caravel is, like, super old school, you know? It's all about those wooden sails and, like, exploring the high seas without GPS or Wi-Fi. A ship from the 20th century? Well, that's like, way more modern, with, like, engines and stuff. So, yeah, they're pretty different, but they both float, so that's cool.

What reforms did the papacy undertake in the eleventh century?

In the eleventh century, the papacy undertook significant reforms aimed at addressing corruption and enhancing ecclesiastical authority. Key reforms included the promotion of clerical celibacy to combat simony and the establishment of the Investiture Controversy, which asserted the pope's authority over the appointment of bishops. Additionally, the Gregorian Reform movement, led by Pope Gregory VII, sought to eliminate lay influence in church affairs and enhance the moral integrity of the clergy, thereby strengthening the papal office and its spiritual leadership.

Where is EVAP canister located on 2001 Buick Century?

The EVAP canister on a 2001 Buick Century is typically located in the rear of the vehicle, near the fuel tank. It is mounted on the underside of the vehicle, often near the driver's side. Accessing it may require lifting the car for better visibility and reach. Always refer to the vehicle's service manual for specific details and safety precautions.

Where is the computer on a 1990 Buick Century?

The computer on a 1990 Buick Century is typically located in the engine compartment. It is often situated near the firewall on the passenger side of the vehicle. The computer, also known as the Engine Control Module (ECM) or Powertrain Control Module (PCM), is responsible for managing the engine's performance and various vehicle functions. It is essential for diagnosing and troubleshooting issues related to the vehicle's operation.

How do you change out an harmonic balancer on a 1993 Mercury Topaz?

Big job! The motor has to be lowered to get at the bolt to take it off. If you have a welder I would just notch out a square in the inner fender well to get the wrench in. Then just use a rubber peice from a floor mat to keep the water out. Other than that its a peice of cake. Take the belt off, one bolt , take it off put new one on and tighten New bolt. Big Job indeed! You have to remove the upper left motor mount while you are supporting the engine. Then you have to remove both lower engine mounting plates which are located under the radiator. Disconnect the two front stabilizer mounts when you are down there too. Remove the two plates and slowly drop the engine to where you can see the Harmonic balancer bolt. Put a 21 MM socket on it and hit it with decent impact gun removing the bolt. Next see if you have enough room to extract the pully. I did not have enough room and ended up cutting about 1/2 inch of metal from the inner wheel well. Next put on a puller and take off the pully. Mine was on very tight and I needed a good puller. Take your time it can be done and The GL on the back of the car mean Good Luck because you will need it. My car was the 3.0 v-6

Why is gas called unleaded?

Older gasoline used to contain chemicals such as tetra-ethyl lead. This prevented preignition in the engine and allowed engines to be higher compression. They stopped using it because of heath and environmental issues. Different additives are used in todays car fuels instead. Leaded fuel can still be used in offroad equipment and airplanes.

2003 buick century heater takes a long time to get warm then immediately gets cold then it finally warms up. if i stop the engine for a few minutes...it is cold again.?

This could indicate an issue with your heater core or thermostat. The heater core may be clogged or the thermostat may be stuck open, causing the inconsistent heating and quick cooling. It's recommended to have a mechanic inspect and potentially replace these components if needed.

How do you remove the radiator drain plug on a 1999 Buick Century?

at the bottom of the radiator is a funky fitting designed to be loosen by hand or a small pair of pliers...you don't remove it you simply drain then refill...also You should be able to find a shop manual at your local library with the right info...make copies as they are usually only in the REFERENCE section....good luck:)

How do you change the drum brakes on a 1992 Buick Century?

The question you ask is too involved for a proper answer. You may want to go to a car parts store, or book store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.

The problem is the number of small pieces of hardware that must be put back together just so. These include, besides the brake shoes: hold-down springs (2), return springs (2), star adjuster, spring for the star adjuster, wheel cylinder if removed, backing plate if removed, brake line connection if removed, self-adjuster lever, self-adjuster spring, self-adjuster connecting arm, emergency brake cable, emergency brake lever. And of course the drum, which may be rusted on. Even with a repair manual, if you have a digital camera, it's best to take a picture or two of it all before you disassemble it, to consult in reassembly.

How do you replace abs wheel sensor 2001 Buick century?

To replace the ABS wheel sensor on a 2001 Buick Century, first, safely elevate the vehicle and remove the wheel corresponding to the faulty sensor. Disconnect the electrical connector from the sensor, then unbolt the sensor from the wheel hub using the appropriate socket or wrench. Install the new sensor by reversing the process: bolt it in place, reconnect the electrical connector, and reattach the wheel. Finally, lower the vehicle and test the ABS system to ensure proper functionality.