Cable Internet

you go to the box and hit delete

the easiest way to make an xnor gate is with a 7486 (or equivalent) integrated circuit, a quad xor gate. connect the output of one gate to one in put of another gate. connect the other input of the second gate to Vcc. the second xor gate will then act as an inverter.

No, logic gates work on low voltage signals typically at 3.3V or 5V. 240V is a high voltage that is typically used for powering devices in electrical systems. Logic gates are electronic components that process digital signals and perform logical operations based on the input signals.

A moocher or a cheapskate.

Both couples are sweet but I have to go with Leyton.

Thier relationship is based on 'fate and destiny.' The fact that Lucas had always wanted Peyton in the first place makes it even better. Their relationship is so strong because they had to go through so many trials to get to the place they finally got.

Brucas is cute, but it reminds me more of a typical relationship, which there is nothing wrong with that at all. But even in the beginning Lucas still wanted Peyton. Brooke and Lucas were good together, but it wasn't ment to be. I liked them, but Leyton fits so much better with the show and they are irreplaceable.

Four.

The type of network your asking about is called a VPN (Virtual Private Network) or a VLAN (Virtual LAN). A VLAN acts like an ordinary LAN, but connected devices don't have to be physically connected to the same segment.

LogMeIn Hamachi lets you setup a virtual LAN connection on both PCs and Macs through the internet. The software is free for non-commercial use, never expires, and will let you set up your virtual LAN connection in less then 10 minutes.

Coherence.

no!

Plug the two computers in to the router, and connect the router to the modem.

The router may have two kinds of ports, one port marked WAN (Wide Area Network) and several ports marked LAN (Local Area Network). If so, the WAN port goes to the modem and the LAN ports are for your computers.

That's it.

Final answer will be NAND bz from first NAND ans NOT AND then Again NOT ( NOT AND) ans AND then Again NOT ( AND) so final ans will be NAND.

An AND gate gives a 1 or True output only and only if all the inputs are True or 1. If even a single output is False or 0, it will not give any output meaning thereby that the output will be False or 0.

A NAND gate is quite the reverse of an AND gate and gives an output of 1 or True only if both the inputs are not True or 1. This means that even when both inputs are 0 or False, it still gives a True or 1 output.

Logic is an important subject because it teaches relation. This has far reaching effects beyond mathematics, where it is often studied. It teaches deductive reasoning, such as the difference between reason and fallacy.

no

You can download a modem booster for free directly from the Modem Booster website. CNET also has a free version that can be downloaded on their website.

A NAND gate is digital logic device which will have 2 or more inputs which can be logic 1 or logic 0 (on or off, high or low) with all the inputs at logic 0 the output will be at logic 1, the only time the output will switch to a logic 0 is when ALL the inputs are at logic 1.

here is a simple "truth table" To show the basic operation

Input1 Input2 Output

Off--------Off------- On

Off--------On------- On

On--------Off------- On

On------- On------- Off

NAND stand for not AND therefore a false will be present on the output only when both input are true

ANSWER: NAND stands for NOT AND it simply negate the function. The only time that the output can be false if all inputs are true. In logic functions there is no ON-OFF it is either true or false "1" or "0"

yes.

i want settings mac address my router...only internet access by mac

If I am in Houston, then I am in Texas

Routers do not need any CD in order to connect to it. If you mean that you do not have a driver for the wireless adapter you get it from the manufacture website (Netgear, Linksys and so on).

In AND gate , if through both the terminals minimum values were send then the output will be 0 . if either one of the input is maximum , then the output will be 0 , meanwhile if both the input were 1 then the output will be 1 .In OR gate , if both the input are 0 then the output will be 0, but if either the input is 1 then the output will be 1,when both the inputs are 1 then the output will be 1 .

Short answer:

An IC is a "Integrated Chip".

An OrGate is a 2 (or more) input chip with onlt 1 output.

Longer answer: IC stands for Integrated Circuit, we call them "Chips" and they have multiple electronic devices integrated into them like resistors, transistors, capacitors, all in one package to make monolithic circuit package, to form everything from AndGates, OrGates, NorGates, ExOrGates, Buffers, to microprocessors and more.

an Or Gate is a digital divice with two or more INPUTS that will produce a digital OUTPUT depending on the input, if one OR the other inputs have an inupt of 1 the output will be 1 otherwise it will be 0. they are used to make "logic" and "arithmetic circuits" from calculators to computers to network cards and routers and much more.

Yes, the roflcopter goes extremely soi soi soi.

NO!!!!! the ROFLCOPTER goes lololololololololololoololololololloololololololol

they have made a code creator it is called ar tools and kit or something like that or if u have Pokemon diamond or pearl look for pokesav