answersLogoWhite

0

Chrysler New Yorker

Chrysler New Yorker was a premium vehicle which served as Chrysler’s flagship model from 1939 to 1996. This car was manufactured in ten generations and became the longest running car nameplate in the US.

517 Questions

Who sings major Tom in the new Chrysler commercial?

The latest version features a cover of "Major Tom (Coming Home)" by Peter Schilling, which is a sequel to David Bowie's "Space Oddity". It is also the prequel to David Bowie's "Ashes to Ashes". The song is available for download at: http://shinytoyguns.com/news/transmission-to-major-tom/

Where is fuel pump relay located on a 1989 Chrysler new yorker?

The fuel pump relay for 89 Chrysler New York is located under hood at driver side fender near battery, may have to remove battery to get to it. There will be three relays, the middle one is for fuel pump.

How do you replace a shifter cable on a 1991 Chrysler New yorker?

Just finished fixing mine today, what a mess. Look at the shifter cable once you get it out. If its just a little bent then stick it in a vice, and tap on it a few times with a hammer to straighten it back out. After my original cable went out I went a bought a $40 aftermarket cable. The aftermarkets are cheap compared to the original, the aftermarket cable broke while installing and could not be salvaged. I ended up having to straighten out the original like i said above and reinstalling it. As for how do you install it? Its pretty simple just look at the way the original one is installed and do it the same way, all I can say is its not much fun, and its not very easy

1992 Chrysler new yorker clicks but it doesn't start?

my sons 1995 new yorker with the same 'symptoms' was diagnosed with needing a crank sensor valve, parts charge $125 total with labour $300

How do you tune up 1990 Chrysler New Yorker?

To tune up a 1990 Chrysler New Yorker, start by replacing the spark plugs and ignition wires to ensure efficient combustion. Check and replace the air filter to improve airflow to the engine, and change the oil and oil filter for optimal lubrication. Additionally, inspect and adjust the timing and replace the fuel filter if necessary. Finally, ensure the battery and charging system are in good condition to maintain electrical performance.

How do you remove fuel rail 1991 new yorker?

To remove the fuel rail from a 1991 Chrysler New Yorker, first, ensure the engine is cool and disconnect the negative battery cable. Relieve the fuel system pressure by removing the fuel pump fuse and starting the engine until it stalls. Next, disconnect the fuel lines from the rail, unbolt the rail from the intake manifold, and carefully lift it off, taking care to remove any attached injectors if necessary. Always use appropriate safety precautions, including wearing gloves and eye protection.

How do you unbolt the headlight housing 1994 Chrysler new yorker?

To unbolt the headlight housing on a 1994 Chrysler New Yorker, you will first need to locate the bolts securing the housing in place. These bolts are typically located around the perimeter of the housing. You will need the appropriate socket wrench or screwdriver to loosen and remove these bolts. Once the bolts are removed, you can carefully pull the headlight housing away from the vehicle to access the headlight bulb or perform any necessary maintenance.

Where is the asd relay location on m y 1991 Chrysler New Yorker Fifth avenue?

In a 1991 Chrysler New Yorker Fifth Avenue, the ASD (Automatic Shutdown) relay is typically located in the power distribution center under the hood. Look for a rectangular black box near the battery; the relay should be inside this box, often labeled on the cover for easy identification. If you're having trouble locating it, consulting the vehicle's service manual can provide detailed diagrams and instructions.

How do you unlock the anti theft device on a 1991 Chrysler New Yorker?

To unlock the anti-theft device on a 1991 Chrysler New Yorker, first ensure that the vehicle's battery is charged and the ignition is in the "Off" position. Then, insert the key into the ignition and turn it to the "Run" position without starting the engine. Wait for approximately 10 minutes until the security light on the dashboard turns off, indicating that the anti-theft system is disarmed. Finally, turn the key to the "Off" position and then attempt to start the vehicle.

How do you remove a 1995 Chrysler new yorker's headlight?

To remove a headlight from a 1995 Chrysler New Yorker, first, open the hood and locate the headlight assembly. Remove the screws or bolts securing the assembly, which are typically found on the top and side. Disconnect the electrical connector by pressing the release tab and gently pulling it away. Finally, carefully pull the headlight assembly out of the housing to complete the removal.