Computer Hardware

Yes. You will a good set of powered speakers as there's a lot of bass in the microkorg output. (Consider using your hifi to get a better result) You will need an adapter cable as most PC speakers have a 3.5mm stereo input jack, while the microKorg has a stereo 1/4 headphone jack and a pair of 1/4 mono jacks for left and right line output.

Options are:

1: Get a stereo 3.5mm jack to stereo 1/4 jack adapter and use the headphone output on the microkorg.

2: Get a 3.5mm stereo to dual phono adapter cable and then a pair of phono to 1/4 mono jack adapters.

Remember to turn all the volume controls down before you switch on/off!

Most computer hardware is not "bit-specific"; you can use a device with a 16, 32, or 64-bit operating system interchangeably as long as you have drivers for the device. The SideWinder Precision 2 is a standard USB HID device; it is supported out-of-the-box on all systems from Windows XP on, both 32-bit and 64-bit editions.

nope some mobiles u can answer throw it or xbobx360 or ps3

Yes, you can try Canon's TR-301 T-Shirt Transfer paper

Stephen_J_Felice@dell.com

Type "help xtset" in Stata. Stata's xtset command does not necessarily expects that your panel has both a cross-section (x) variable and a time (t) variable. Let's say you have data collected yearly from a bunch of countries. In this case the order of the observations for each country matters, so you use: xtset country year But sometimes your panel isn't a real panel, in that while the observations may be correlated within the x dimension, their t dimension order does not matter. Suppose, for example, that you have multi-country data collected by city. Say you expect the variables of interest to exhibit intra-country correlation, but clearly the order in which cities show up in your data set for any given country is irrelevant. This is a panel, but not a proper one. If you want to use xt commands, then you xtset it like so: xtset country

Information.

Computer hardware enhances the software working. If the your software can handle 3D rendering and your processor is not powerful enough to handle the calculations then it won't work properly.If you replace your processor with a better multi core processor then your software working will enhance.

Intel centrino-dio is better for the current market.

The four Basic operations that comprise a computer machine cycle are: 1. Fetch : Obtain program instructions or Data files from Memory 2. Decode : Translate Instructions into commands 3. Store : Write result to memory and 4. Excute : Carry out command

Usb is a port, and is just a port for transferring data, the reason for different ports

is data transfer speeds. Now if your talking usb flash drive or sd card, you just plug it in

and go to my computer and open it like any other drive. If you only have one hard drive and one CD ROM then it will show as drive (e) it opens like any folder or window, copy and paste or just drag pic into it.

Hi!

Sorry but let us know

1 - what you say is 'anything' ?

2 - What Operating system you are running (Linux, Windows xxxx...)

Thanks

Because with most MP3 players you can only "output" media. As opposed to "input" meaning it can receive, such as a microphone, or a camera.

there is a thousand or so kb in a megabyte so around 952,000

Using the SI units, 9 megabytes is 9,000,000 bytes as 1 megabyte is 1 million bytes. However, megabyte is often taken to be 2^20 (1024 x 1024 = 1048576) in which case, 9 megabytes would be 9437184.

you would have to do so through home-sharing, a memory stick etc. it can not be done from ipod straight to another ipod, you must use a computer.

This is caused by a flaw in WindowsXP. Note this is only for XP and does not apply to Windows98. WindowXP ignores mapped drives and assigns F to the flash device which is already assigned to the network. This causes both the flash device and the network to fail. To remedy the situation you need to remap the flash device.

Right click on My Computer

Choose Manage from the menu

Double click on Storage in the right window pane

Double click on Disk Management(Local) in the right window pane

Find the USB device you have installed and right click

Choose Change Drive Letter and Paths from the menu

Click the Change button and pick a drive letter that is not in use (S and R and good choices)

Click OK and exit the Disk Management program

You have have to do this only once per device per port. This means if you plug the same device into 3 different USB ports you will have to remap 3 times. Windows will remember the device settings after you set the drive letter once.

i think its a flashdrive

Linux systems aren't any more prone to physical failure than any other computer systems. If you are referring to a device being incompatible with Linux, the most troublesome are probably controllerless dial-up modems (WinModems).

It is mostlikly to be 400

Its is the CPU, HDD, processors, and RAM.

In computer language, it dosent stand for something, it is a slang, or abbreviation for MOtherBOard or Motherboard.

Data and instructions from an input device are sent to the CPU. When the time is right, the control unit sends this information from the device to the arithmetic/logic unit, where an arithmetic operation or logical operation is performed. After being processed, the information is sent to memory, where it is held until it is ready to be released to an output unit. Basically, it is a form of storage.

To be specific, I don't mean the power adapter , but the part it connects to. The part you plug the charger into. I need to know the name of it so i can replace it.