0
Dodge Intrepid
In this category you can ask questions about Dodge Intrepids. These questions can include where to find parts, how to get help, or how to do it yourself.
1,915 Questions
SENTENCE: Intrepidity is a characteristic expected among fighting soldiers.
How do you change spark plugs in a 97 dodge Intrepid 3.5?
There is no need to remove anything. But the wires. Just do it one at a time. Remove wire don't matter witch one you start with. Next you gonna need a socket that will fit your plug and a ratchet extension. Stick the socket down in the spark plug tube and lossen the plug all the way. Next use the wire you removed and stick it back on the old plug and pull the old plug out with the wire. Gap new plug drop in hole tighten till you crush the crush washer on the new plug. Witch dont take to much force so be carefull. Replace wire and do the same for the rest. Hope this helps.
Where is the location of the tcm on a 2001 Dodge Intrepid 2.7 engine?
tcm locatation on 2001 intreped
You add the fluid down the transmission dipstick tube.
Where is 3.3 intrepid oil pump located?
The oil pump is in the timing cover and is driven off of the crankshaft snout. You have to remove the timing cover to replace it.
What are the symptoms of a broken timing chain on a 2004 dodge durango?
the engine wont run. it cranks funny
Will a 5x139.7 bolt pattern fit a 5x114.3?
It will not fit without an adapter. The 5 in that number refers to the quantity of bolt holes. The 139.7 refers to the distance between adjacent bolt holes in the pattern. In other words the distance between the upper most bolt hole and the lowest bolt hole in the pattern. Obviously, if the distance between the bolt holes is off by 25.7mm, this wheel will not fit.
The only option is to purchase a bolt pattern adapter commonly referred to as wheel adapters, to change the bolt pattern of your vehicle.
these cars a prone to air pockets. make sure it's not air locked first. I believe they have bleeder valves to let the air escape. easy way to check the pump is pull a heater hose off at the firewall and put it in a bucket. cap off the open port on the heater core. start the car. if the pump is working the coolant should come out under a decent ammount of pressure. if it's trickleing out or nothing comes out then the pump is done. Also make sure your fan is coming on when it should. people often overlook the fan.
How do you depressurize the fuel system Daewoo Leganza?
IMPORTANT: Do not skip the fuel system pressure release step. Injury and other damage can result!
Safety Step! Relieving Fuel System Pressure
· allow engine to cool
· relieve fuel system pressure
· put on your eye protection
Before you begin the job of replacing your fuel filter, you must relieve the pressure in your fuel system. A fuel injection system operates under very high pressure. If you don't release this pressure before you start unscrewing fuel lines the result can be explosive. Do this before you attempt to change the fuel filter.
To release the pressure in your fuel lines (and fuel filter) you'll need to locate the fuel pump fuse in the fuse box. If you don't have a fuel pump fuse, find the relay that operates the fuel pump. Once you've found the fuel pump fuse or relay, start the car. With the engine running, pull the fuse or relay out. If you pulled the right one, the engine will quickly die. Since it's using all of the pressurized fuel in the system, the fuel lines won't be pressurized when you crack the fittings on your fuel filter.
Now that you've relieved the fuel pressure you can remove the old fuel filter.
If you didn't do this yet, you must go to the previous step and do it. Very dangerous!
Where is the fuse box and or the relay on 95 suzuki sidekick
Can a mechanical throttle body go in the limp home mode?
Yes.. look on line ebay or a junk yard.you have to buy the who throttle body.
What would cause a gas leak on top of engine 1996 Dodge Intrepid?
A leaking fuel rail is the normal cause.
What is the tire size for 2004 Dodge Intrepid?
Check the label on the drivers door jamb. Could be a couple of different sizes.
Inertia switch 1999 Dodge Intrepid?
Dodge doesn't use an inertia switch. The fuel system is computer controlled with relays.
1998 Dodge Intrepid wont start cold?
Hi - I live in Alaska, where temps. drop very low (below zero) but the rule of thumb is "plug at 20", meaning plug in your car at 20 deg. or below...Today must have been right at 20 deg. or just below that today and my 1997 dodge intrepid wouldn't start. It finally did, but I only plugged it in for like 2 min. and it sounded like I blew or damaged something. However, everything seemed to be working fine on the way to the store and back so I should be good. Anyways with the intrepids or any car at that, get an extension cord and plug in the plug in the front of your car to an outlet and after 20-30 min. your car will start just fine (plus it's really good for it!).
:)
How do you replace headrest 2000 Dodge Intrepid?
There is a small pin hole in the plastic part in the seat that the headrest goes into. after bringing the headrest up as far as you can insert a straightend paperclip into the hole and press as you lift up. You may also need to depress the thumb clip on the other side of the pin hole at the same time. I removed mine, it wasn't very hard.
Good Luck!
How do you diable the alarm system to a 1998 Dodge Intrepid?
You can not disable the factory alarm. It is built in as part of the computers. If it is a aftermarket alarm you should be able to remove it and put the car back stock.
What do i need to do when my 2003 Dodge Intrepid has overheated?
Find out why it overheated. Normally it is a stuck thermostat, clogged radiator, low of coolant, air in system, defective water pump, broken or slipping belt, defective fan motor, blown fuse, or defective fan motor thermal relay. If you stopped immediately then no damage was done.
