0
Engineering
Engineering is an art and profession devoted to designing, constructing, and operating the structures, machines, and other devices of industry and everyday life.
5,839 Questions
TMX steel is a high quality QST bar. Thermex technology is used for this. Thermex bars, unlike CTD bars, have a proven record resisting loss of strength at high temperatures as experienced during fires. Quenched & Self Tempered (QST) steel, can be described as a new-generation-high-strength steel having superior properties such as weldability, strength, ductility and tensile strength, which meets the highest international quality standards. Both Thermex and TMX are trademarks owned by H&K Rolling Mill Engineers Pvt. Ltd. in India.
How do we use ubiquitous computing?
The same way as we use products without it. However products with it can also: be controlled remotely, report problems and failures directly back to the manufacturer making under warranty repairs automatic, etc.
Unfortunately there is also a significant chance of hackers attacking them that clearly did not exist with products lacking this feature!
Depends on so many factors.
1. Which country will under take the project
2. Which agency in that country will undertake the project.
3. what facilities are to be provided.
4. What are the additional safety measures that are to be incorporated.
5. Time frame of the project.
6. Whether requirement of minimum standers or higher order.
such so many parameters will vary the estimate of the project.
Primarily the Arch Pilaster and domes.
They were pretty sure that an arch was safe to walk under because, when they built one, they made the Designer/Architect stand under it while they removed the supports after construction.
How many fasteners are in a aircraft?
Can vary for different aircraft, but it depends on the number of seats
Where was Whitcomb L Judson educated?
Whitcomb L. Judson was educated at Knox College in Galesburg, Illinois.
What are the disadvantages of hard water?
The disadvantages of having hard water is that if you have a boiler or a kettle and they are used for a long period of time then they will begin to clog up with fur and limescale.
Another disadvantage is that when you have a bath with bubbles then the water will react with the soap so you won't get a lather but a scum.
Bathroom
Showerheads and spray-nozzles can become blocked; they can even clog the small holes completely and reduce their efficiency. The bathtub and sink seem to be the places where there is a visible soap scum build up. Without proper treatment his build up is very difficult to remove and may require a lot of cleaners and many applications. Scale can clog pipes and can decrease the life of toilet flushing units.
Bathing
Bathing with soap in hard water leaves a film of sticky soap curd on the skin. The film may prevent removal of soil and bacteria. Soap curd interferes with the return of skin to its normal, slightly acid condition, and may lead to irritation. Soap curd on hair may make it dull, lifeless and difficult to manage. Similarly, the insoluble salts that get left behind from using regular shampoo in hard water tend to leave hair rougher and harder to detangle.
Laundering
Clothes washed in hard water often look dingy and feel harsh and scratchy. The hardness minerals combine with some soils to form insoluble salts, making them difficult to remove. Soil on clothes can introduce even more hardness minerals into the wash water. Continuous laundering in hard water can damage fibers and shorten the life of clothes by up to 40 percent.
Dishwashers
When washing dishes, especially in a dishwasher, hard water may cause spotting and filming on your crockery. The minerals from hard water are released faster when it comes into contact with heat, causing an increase in the amount of spotting and filming that occurs. This problem is not a health risk, but it can be a nuisance to clean and reduce the quality of your crockery.
Problems in Water Boiler Systems and Pipework
Hard water also contributes to inefficient and costly operation of water-using appliances. Heated hard water forms a scale of calcium and magnesium minerals (limescale deposits) that can contribute to the inefficient operation or failure of water-using appliances. Pipes can become clogged with scale that reduces water flow and ultimately requires pipe replacement. Limescale has been known to increase energy bills by up to 25%.
What is process re-engineering life cycle?
Process re-engineering life, it contains the complete life cycle of how the process is changing. What are the steps to change the process. It is closely related to Business process re-engineering.
The steps of PRLC are:
1) Envision: In it, it is checked the secured commitment with the top management. Then we have to proceed.
2) Initiate Change: After checking the commitment form the top management, we have to initiate the new change what we are going to made in the process.
3) Process Analysis: Then we have to analyze the whole process and have to identify what are the necessary changes to the process.
4) Process Re-design: Then we have to re design the process by implementing all the necessary changes to a process.
5) Constructing: In it, we are implementing all the changes that are required to re-desing a process.
6) Implementing and maintaining: In it, we are implementing all the changes to a process and then last step is to maintenance of the process.
What is the best tools to use for hard metal engraving?
An electric vibration engraver is the only one that works satisfactorily.
Is any company providing project for final year engineering student?
Yes ofcourse. Most of the companies provide including TCS, CTS, ... etc
What is the difference between unbalanced transportation and unbalanced assignment problem?
model sum
How do you test a solid state relay?
A small light bulb is often used to test a solid state relay (SSR). That is because a SSR needs a minimum load of at least 0.1 amps in order to operate. Using a meter does not provide a sufficient load.
How do aircraft fire warning systems function?
there are 3 detectors i can only think of 2 off the top of my head, there is a continuous fire wire which detects mainly heat and sets off the sensor if there is a break in the wire caused by melting,, so u may get a false fire indication from a hot start, there is also an infra-red detector which is more accurate as it can be used to detect actual flames,, the third detector is much like the continuos fire wire and only detects heat so again is not as accurate as the infra red.
Is it necessary to submit income certificate even for oc during eamcet counselling?
No it is not necessary...
it is of BCE candidated only.....
It is a synthetic rubber gasket that prevents the bearing from losing its grease or being contaminated with dirt
Important factors that can be used to comparing the various digital-to digital encoding schemes?
A lack of high-frequency components means that less bandwidth is required for transmission. In addition, lack of a direct-current (dc) component means that ac coupling via transformer is possible. The magnitude of the effects of signal distortion and interference depend on the spectral properties of the transmitted signal. Clocking: Encoding can be used to synchronize the transmitter and receiver. Error detection: It is useful to have some error detection capability built into the physical signaling encoding scheme. Signal interference and noise immunity: Certain codes exhibit superior performance in the presence of noise. Cost and complexity: The higher the signaling rate to achieve a given data rate, the greater the cost. Some codes require a signaling rate that is in fact greater than the actual data rate
