answersLogoWhite

0

🌼

Home Improvement

Whether we are looking for a change, an improvement or finding a better way of doing something, others have been there before you. Ask for assistance from those that have attempted it before you start!

9,711 Questions

What kind of screws do you need to install plant hanger on outside of house?

Simple woodscrews ,- for length measure the wood you are screwing to the house, add 1 inch to it -possibly 1 3/4 in total. Go to Home Depot and buy a small package of green (outdoor coating) # 8 x 1 3/4 (or 2 ) inch screws with Robertson head. Make sure you have a #2 Robertson bit to fit your electric drill, you can do it by hand, but it's a pain. Bits are available in the aisle usually next to screws.

What kind of light fixture do you need to shoot light up onto a wall Where would someone find a fixture that would send a beam of light up the side of a wall?

Wall sconce- low-profile, mounts on wall & shines light up/down in beam, flood, or accent style illumination.

Fish-eye recessed light (aka can light)- is a basic can light fixture with a directional shade attachment allowing the illumination to be directionally angled downward from it's ceiling location in a 360 degree radius.

Track Lighting- a celing mounted 'track' provides a changeable anchoring base for pendant lighting (i.e. the lights hanging over the counters at Starbucks Coffee) and mini spotlight fixtures. Many styles are now available with energy saving LED lighting but most will use the high intensity halogen bulbs.

You will find these and many more styles at Home Depot, Lowes, Orchard Supply Hardware, True Value, Ace Hardware, or any other hardware or lighting store. You'll even find them at Target & Wal-Mart.

Why does the ground need gravel?

Gravel helps improve drainage by allowing water to flow through the soil more easily, preventing water pooling and potential erosion. It also contributes to better stability and support for pathways, driveways, and construction projects.

What are cool breezes at night caused by differences in heating and cooling rate of land and water?

When land adjacent a water body heats up during a summer day it does so faster than the water so that there will be rising air above the heated land known as thermal lift. On a hot day a vacuum is thus created at ground level and replacement air must be drawn in at the surface and from the water body as well. The air being drawn in from the sea is called a onshore wind or 'seabreaze' At night when the land cools down, the air above the land mass will also cool down and in fact will begin a slow decent. At night then there will occur a land breeze as the cool descending air mass dissipates at ground level being pushed in every direction outwards. Some of that falling air will travel horizontally seaward toward the adjacent water body causing an 'offshore wind' and this occurs generally at night.

What are the rates of heating and cooling of soil versus water?

Water has a higher specific heat capacity compared to soil, meaning it takes more energy to heat up or cool down water than soil. As a result, water heats up and cools down more slowly than soil. Additionally, water has a higher thermal conductivity than soil, allowing heat to transfer more efficiently through water compared to soil.

What are facts about Modern Design for Interior design?

If you are looking for modern interior designing of your home or office, you must try following steps.

  • Add lighting to your casual interior design
  • Add different colors to your space
  • Add great accents
  • Choose most suitable furniture
  • Give your windows some personality

What are cool breezes during the day caused by differences in heating and cooling rates of land or water?

Think about it this way - warm air rises. When air is over a warm surface, it will heat up and rise.

Also remember this - water holds on to heat or cold longer than solids (like rock) do. Therefore, the land will heat and cool faster than the water will.

So, picture this: In the morning time, everything starts to heat up because of the sun's rays. The land heats up faster. So the air over the land rises. As the air rises and rises, it begins to get cooler, until it sinks. This whole process creates a cycle of wind above the land and sea. The air drops on to the cold ocean, moves on to the land to replace the air that has risen (this causes the breeze) and then heats up and rises. The cycle continues, creating cool breezes from the ocean.

The same happens at nighttime, but in reverse. The ocean is now warmer, because it is holding on to the heat from the day. The air sinks on to the cold land, and as the air over the ocean rises, the cool air on land rushes to replace it (causing a warm breeze out to sea). That air then rises and begins the cycle again.

Is drywall a natural resource?

No, drywall is not a natural resource. Drywall is a building material made from gypsum, which is a naturally occurring mineral. The process of extracting and processing gypsum to make drywall involves human intervention and manufacturing.

Which way does the DNA Ladder twist?

The DNA ladder (double helix) twists in a right-handed direction. It forms a spiral structure with two strands that are connected by hydrogen bonds between complementary bases (adenine with thymine, guanine with cytosine).

What glue is made from peanuts?

Peanut glue is made from peanuts that have been processed to extract the natural oils, which can then be used as an adhesive. The oils are typically mixed with other ingredients to create a glue with adhesive properties.

What is envolope glue made of?

Envelope glue is typically made of a gum-like adhesive derived from substances such as dextrin, gum arabic, or synthetic materials like polyvinyl acetate. These compounds are mixed with water to create a sticky solution that seals the envelope when moistened.

How do you describe the heating and cooling rates of soil and water?

Soil typically heats and cools at a slower rate than water due to its lower thermal conductivity. Water has a higher specific heat capacity, meaning it takes longer to heat up or cool down compared to soil. This difference in heating and cooling rates affects the overall temperature dynamics of soil and water environments.

How much does a cubic yard of top soil cost?

The cost of a cubic yard of topsoil can vary depending on the quality and location, but on average, it can cost between $20 to $50. Additional delivery fees may apply depending on the supplier and your location. It's best to check with local landscaping supply companies for the most accurate pricing.

Is heating and cooling mechanical weathering?

Heating and cooling can contribute to mechanical weathering through a process called thermal expansion and contraction. When rocks heat up and expand, then cool down and contract, it can cause them to break apart due to the repeated stress.

Does water have strong cohesive properties?

In terms of causing different molecules to stick together (like glue holding pieces of paper together), water is relatively weak. However, in terms of water molecules holding tight to other water molecules, they are very strong because they have particularly powerful intermolecular forces (called hydrogen bonds) that keep the molecules together.

What is an earth rod?

An earth rod, also known as a grounding rod, is a metal rod that is buried in the ground to provide a safe path for electrical currents to dissipate in case of a fault. It helps prevent electrical shock and damage to electrical equipment by directing excess electricity safely into the ground.

What happens when propane is hooked up to a stove set up for natural gas?

If a stove set up for natural gas is connected to propane, the flame produced will burn hotter and may create soot or carbon buildup due to differences in heat output and combustion properties of propane compared to natural gas. Furthermore, using propane with a stove designed for natural gas may void the appliance's warranty and pose a safety hazard if not properly converted.

What is soldering wire used for?

Soldering wire is used for joining metal components together by melting the solder and allowing it to flow between the parts, creating a strong bond when it solidifies. It is commonly used in electronics, plumbing, jewelry making, and other metalworking applications.

Barrier between the inside of the cell and it's environment?

Cell membrane serves as a barrier between the inside of the cell and its environment. It controls the movement of substances in and out of the cell, allowing it to maintain internal conditions necessary for survival. The cell membrane is made up of a phospholipid bilayer with embedded proteins that help regulate transport and communication.

Which molecules make up the rungs or steps of the DNA ladder?

The correct answer is Adenine, Thymine, Guanine, and Cytosine. If that is the answer, the answer before forgot one of them. REMEMBER! Adenine and Thymine go together and Guanine and Cytosine go together.

Why are neutrons needed to hold the nucleus together?

Atoms never have two or more protons in their nucleus without having at least one neutron (or more). Protons don't like each other. They have a positive electrostatic charge, and like charges repel each other. So protons alone cannot make up an atomic nucleus. Enter, the neutron. When atoms are created by fusion, neutrons are included in the construction. They have to be. In fusion, the building blocks of a new atomic nucleus are "smooshed" together, and all of the particles undergo a mass change. Each nucleon loses a bit of mass, and that mass is converted into nuclear binding energy or nuclear glue. And it is this stuff that makes the protons stick together (with the neutrons). It takes protons and neutrons to contribute to the creation of binding energy to cause a nucleus to fuse together.

The hydrogen-1 isotope (the most abundant form of hydrogen) has no neutrons, which is possible because it only has one proton.

Does anyone make a dimmer switch with an outlet?

Probably not. Dimmers must dissipate a significant amount of heat generated by the dimming process. An outlet would occupy too much room in a switchbox to allow the dimmer to cool properly. In addition, an outlet (receptacle) carries its own load which also means additional heat in the switchbox. Electrical codes require boxes to be filled only to a certain point to allow proper heat disipation.

How does heating and cooling weather the rock?

because the rocks get very hot during the day with the sun, and then go very cold very rapidly at night time. this causes the rocks to expand and break away bits at a time, this is weathering of a rock.