0
Home Theater
Also known as home cinema, the home theater is built to imitate (or surpass) the commercial theater experience and performance with the help of the latest state-of-the-art audio and video entertainment equipment.
2,043 Questions
If you are referring to having him date you then simply approach him and ask him on a date and get to know one another.
Which LAN hardware component is used to amplify the signal travelling on the cable?
Any active network device will do that. If this is a test question, answer "A repeater", as that is the only function of such device.
In truth, any device that takes a signal from one end and transmits it through another end will "boost" (amplify) the signal - or, rather, it will send out a "new" signal carrying the same information. Such devices include all types of hubs, switches and routers. Also, as mentioned above, repeaters.
If you meant "cable" as in "cable tv" - then it's the modem/router, usually the first device hooked up into the cable. As I've mentioned above, however, these devices take the signal in and put out a new signal on the other end, so they don't really "amplify it" as such (usually processing of the signal is involved).
How do you unlock your Sony dav-dz 275 player?
If you mean 'unlock' as in play discs from different regions, there is no region unlock for this model. If by 'unlock', you mean reset the parental control password, all Sony DVD's can be reset by entering 199703 when there is no disc in the player.
Does Panasonic home theaters have same terminals?
Most home theater systems have similar terminals to each other, including the Panasonic range. As each amplifier and processor unit is different, you can expect the number and locations of the connectors to be different as well.
Here is a very general guide:
For audio inputs, expect to see RCA (phono) connectors or 3.5mm mini jack sockets.
Video inputs, if they available will be RCA for composite or component, VGA (15pin D connector) or HDMI for high definitions signals.
Signal outputs will normally be similar to the inputs for both audio and video.
Speaker outputs will normally be a terminal to accept bare wires or might use 4mm single pole connectors (banana plugs).
If you are replacing an existing home theater system, it's worth looking at the user manual before making the change. The manual will have all of the connectors described in detail and you will be able to make a comparison with your existing cables and the new unit. If you don't have the manual, most can be found on line at the manufacturer's web site.
There is very little difference between the 'quality' of most PC software media players. If there is much difference between lossless media players, it normally has more to do with the decoder used in that player (e.g. Nero and WMP are notoriously bad for this). Foobar2000 is normally rated highly for quality.
http://foobar2000.org/
http://en.wikipedia.org/wiki/Foobar2000
Foobar also has the advantage of coming with all the major lossless codecs 'from the box', replaygain, lastFM, and iPod support, and has various other improvments that are unavaible on other players, or require plugins (e.g. kernel streaming)
Voltage of a cable is 220 kv what does this mean?
The lower-case 'k' in 'kV' (not 'kv') is a multiplier, representing 'kilo', meaning 'a thousand times', and the upper-case 'V' represents 'volts', the SI unit for potential difference. So a '220-kV' cable has a line voltage (voltage between conductors) of 220 kV.
You should stick to a single HDMI cable to the TV, and then use a surround sound receiver (with HDMI) to handle the switching between sources. Most better models will also upconvert from standard-definition sources like digital cameras and DVDs for you. This will allow you to expand without running more cables. You should look for HDMI cables that have a CL2 (in-wall) rating. The cable can be fished through using a fish tape, and the holes in the walls finished with a low-voltage cable wall plate or a custom-configured keystone plate.
No. HDMI to DVI uses a DVI-D or DVI-I connection and is digital, but a DVI to VGA uses a DVI-I or DVI-A and is analog. The best way to connect a PS3 to a projector is to see if the projector support component video through the VGA input using a VGA to component pigtail adapter. The projector might have even come with one. You then need to purchase a PS3 component video cable. This will allow resolutions up to 1080i (if your projector support it).
How do you wire a speaker volume control?
This is strictly dependent of the type of control being used. If you just have a potentiometer (variable rotary resistor) then connect ONE wire from the source to the middle (wiper) terminal on the Pot. then from either other terminal on the Pot. continue the circuit to the speaker.
This just limits the amount of signal going to one speaker. THIS IS ONLY APPLICABLE WHEN ONE SPEAKER IS USED. If you could direct me to the instructions that came with your controller, I could help you out.
See my Bio.
If you purchased this from a Radio Shack, or similar electronics supplier, tell me the part, model number and I look it up for you.
ABOVE ANSWER IS TOO SIMPLISTIC....
Speaker volume control, done properly, is not a matter of just adding resistance (or variable resistance) to the line. Properly done, the amplifier's output impedence must be matched to maintain proper loading and avoid premature burnout and distortion.
Dynamic speaker connections (2, 4, 8 ohm, for example) can have a volume control added by using a potentionmeter (variable resistor) with decent results and without doing damage or getting too much distortion. For most applications this is okay.
What you need for a simple resistance control:
A 2-gang potentiometer of about 15 to 25 ohms rating. Here's more than you'll ever need to know: http://beavishifi.com/articles/Volume_Control/index.htm
THE RIGHT WAY:
The right way to do this is to use an 'impedence matching' control. These controls allow you to put on strings of speakers yet maintain a constant impedence to the amplifier output (up to the power limit of the amp, of course).
Here, now, is what you need: http://www.audioc.com/accessories1/misc/vcontrol.htm
ANOTHER WAY:
There is another way to do all this.. that is if you have pro-grade amps. You can use what is called 70volt lines. 70volt amp outputs allow you to string many speakers down the line (each with its own step down transformer, not hard to wire or figure out). If this is of interest then you may want to Google it and go from there.
HOPE THIS HELPS.. Caio!
What size screws are required to put the bottom stand on your 47 inch rca tv?
There is no standard for bottom stand screws. They will most likely be metric, and be 8,10 or 12 mm in size.
How do you connect a 3 wire s-video cable to a 4 wire s-video cable?
S-video carries two signals and requires two co-ax cables to connect them. There is no standard three wire S-video connection. Having said that, it is possible that a manufacturer has decided to provide a proprietary connection which is not recognized as a standard interface. The two screens of the conventional S-video co-ax may be linked together and so produce a three wire version. If that is the case, investigation will be needed to find out which is the screen, which is the luma signal and which is the chroma signal.
For a full answer, more detail will be needed. In the discussion area, add details of the appearance of both connectors, the manufacturer and model number of the two devices and a better answer is very likely.
If the receiver is just stereo, not surround sound, you will not be able to create a surround sound (front, centre, sub, surround) setup.
Is there a Windows laptop available that has stereo audio input?
Real simple. Buy a USB head set. this will allow you to have a digital vs. analog audio which is much more desirable. If you by a headset with a mic it will also allow you to record audio with the ability to edit more quickly and easily with less static or the chance of the analog connector being damaged.
Answer
Yes! all of them do! go to radio shack to find the part to connect it to your laptop.
Answer
If you find a laptop with stereo audio input, I'll buy it too: as far as I can tell they all have only mono input. One way around this is to buy a USB audio adapter price around $100
Answer
Some do, but most don't. If a laptop has only 2 audio jacks, they're usually a stereo line output and a mono microphone input (mono only because a microphone normally has a mono plug; the input goes to both channels of the sound card). But if it has 3 audio jacks, that 3rd one is usually a stereo line input. Toshiba and Ac er are two brands I know of that often have a line input jack. I've heard rumors that built in sound cards in laptops have poor audio quality. I don't know if that's true (I probably wouldn't be able to tell, anyway), but maybe that's why a lot of them don't bother with a line input. So if high sound quality is important to you, and compactness isn't, then you might end up buying the external USB sound card even if you get a laptop with 3 inputs. One example of an external USB sound card is Creative Labs "Sound blaster Live!" ($45 at Tiger Direct). I have the older, lower sound quality model that preceded it, and I like it a lot. I use it to record mp3 files from my old Lap's.
ANSWER
Toshiba laptops
Audio steganography means that the hide the information in that audio formate on the audio formate by using the LSB ,Echo,phase and spread spectrum coading.
in these steganography method is most usefual and good method to hide the data in audio formate but one major disadvantage is if in audio steganography metod in processing data in that some intrupts are ocurred then input is not equal to output.
Why you have no sound when recording with the rca input sound on the toshiba DVD recorder dr6?
Go to the DVR's set-up screen and see if it has an option for selecting the audio inputs for recording. It may also have separate recording volume level controls whichg are turned down. Just guessing here, but that's the best place to start.
What are best speakers for karaoke?
The best speakers for karaoke typically include features like high power output, clear sound quality, and good bass response. Popular choices include the Yamaha DBR Series, JBL EON Series, and QSC K Series, which are known for their durability and excellent audio performance. Additionally, Bluetooth connectivity can enhance convenience, allowing for easy pairing with karaoke machines or mobile devices. Look for speakers with built-in mixing capabilities for added versatility during performances.
Does ypbpr carry audio and video?
Y Pb Pr is a form of component video with three signals. Y is the brightness signal while Pb and Pr each carry color information. All three are required to produce a full color image and they do not carry audio. Audio will usually require a further two connectors for stereo audio.
How do you enlarge screen in USB mode in BX300 sony Bravia tv?
Please do not continue your question in the answer section of the page. If you need more information for a different question, ask that question separately.
The resolution of the video determines how large it will be on the screen. If you have a video that is 1980x1080 pixels, it will fill up the whole screen.
PPT or Powerpoint files cannot be played on any television. You will need to convert the graphics of the file to still JPG photos, or AVI or MPEG video files.
How do you get your home theatre system to play everything you watch on tv?
Using a Cable or Satellite tuner box, connect the audio output of the box to the input on the home theater system.
If you are not using an external box, connect the audio output of the TV to the input on the home theatre system.
