0
Model Making
Questions about making models, such as cars, rockets, airplanes, or other models.
287 Questions
How is a wooden ship inside a glass bottle made?
The ship is made in such a way that it will fit into the neck of an ordinary bottle. For example, if it is a sailing ship, the masts are made to hinge where they meet the hull so that they fold back, and the spars are rigged so that they swivel and lie flat. The rigging is made to run freely and not secured until the ship has been inserted into the bottle. The ship is designed to collapse into a 'sausage' that will then fit down the neck of the bottle and it is then set into the sea. The rigging that runs through the bowsprit and out of the bottleneck is then used to gently haul up the masts, the yards are squared, and the rigging secured at the bowsprit. The excess rigging is then removed. There are many other techniques used to add to the 'impossible' illusion, such as building the ship in pieces which are small enough and put in separately and the adding of components after the ship is inside the bottle.
What does a hydroelectric power station look like?
Typically, hydroelectric power station appears to be a dam holding back a reservoir of water. Inside are turbines that turn the water to steam to produce electricity.
How can I build a model of the Temple of Hephaestus for a project at school?
You can also use paint and create it on your own.
How do you make a 3d model of the parliament house of Australia?
by getting pic of the house and using cardboard rolls and normal cardboard then make it look like the parliament house
get a tooth pic flag and pin it on top
How do you make a model for a tsunami experiment?
you can make a little model of a city and make a little tsunami. and see how much damage it caused. then compare the damage that it did to a real tsunami.
Look at the type of tsunami your doing. Is it a certain tsunami? If it is research that particular tsunami first. Look up how big it was, what the town looked like, what color it was. Those types of questions. Once your happy with your research and you think you have enough information start building. If you were making a model of The Boxing Day Tsunami you would make the color of the water in your model the same as what color that tsunami was. I hope this info has helped. If not, keep trying!! Now make sure you have a clear plastic rectangular box that has the top cut off. Make sure you have an incline sliding material to give energy to the tsunami. If it does a little wave your god to go.
Get a tub and fill it up with water and then splash!!
Here's a way to make a tsunami model. First you need at least a Ziploc bag of sand, a "showoff" tub or aluminum rectangle shaped pan, a lid to a big Tupperware, and various amount of water. Now here's some choices for a science project or just for now here they are .enjoy them and learn. The way for a science project is to get 3 "showoff" or rectangle pan. Then if you hadn't heard of variable, it makes a great science project. But for this your going to need 3 bags of sand. OK, your variable is the amount of water that will flood the land. Use some 3 big Tupperware lids and place them in the pan or tub. After that, pour the sand onto one side of the tub or pan, then pour the water. Tip, make sure no water gets under the lid. You will then see how much the water had flooded. Hope you enjoyed! Now just repeat the steps except, take away 2 tubs, 2 bags of sand and some amount of water. Enjoy, And win the contest or just have fun!
well you can get a ballon and put it under like a bath tub to start then prick it and hopfully it will make a mini tsunami
I think that you get a tub/bucket and put water in. NOT all the way... Then take a piece of plastic board and put in water. Then you pull the plastic board towards you and you can cause a small tsunami...... THANK YOU FOR LISTENING
its easy just fill a tub with water and throw a rock at the water calling it a meteorite. or put bricks in it connected to a string pul the string and wala
What do you mean by Styrofoam balls?
Small balls made of styrofoam. Craft stores sell them in various sizes.
How do you make Warhammer 40000 models with modelling putty?
Usually you don't "make" a model. I use green stuff from GW to add things like capes, nurgles rot, etc. Most of the time it's used to created extra details to personalize the models. From my experiences I wouldn't use it to put a model together, not only does it not hold well, its more expensive. I'm a fan of a glue called Zap-a-gap it holds well, but unlike plastic glue it doesn't melt the model together and you can take the model apart to reuse its bits. Hope that helps
It is 1/16 of real size. If something is 16 feet long, say a small car, the model will be 1 foot long.
How do you make a working model of a hydraulic bridge?
you get glue and popsical sticks, me duckie. then you get a big red staples "do it" button, and EH VOILAAAA!
you got yer hydraulical bridge :D
How do you make an Olympic stadium model out of polystyrene?
so here is how to make it. but the stadium is flat. all you need is duct tape and cardboard. first, you cut a round circle for the base. next, you need to find the perimeter of the circle. then cut the sides. (the perimeter) after that, you just tape the sides on. (you might find this unhelpful)
What materials would you need to make a sand dune model and how would this model show the process?
- you can use sand that is all i really know and i think glue
What will you need to make an easy model of the Titanic with your child?
The easyist model of the titanic would likely be the 1/1200 scale plastic model kit issued by Revell. Its about 5 inchs long when finished. There are also paper models available. All they require is a little tape and siscors. Do an internet search for "Fly Models" which prints paper model ship kits. They come on paper that the thickness of greeting cards and come in a wide variety of sizes.
How was Bohr's atomic model similar to Rutherford's model?
they aren't the same. the current atomic model has the electrons moving freely in the atomic cloud while the bohr model has the electrons in a set orbit.
How do you make a model stadium for a kid's project?
a model stadium is kind of tough. i wo9uld suggest you start with the scaffolding. You can use clay and then paint it, or use card board or mesh. if you wanted to use clay, you could shap a large cone, since the seatig generally goes in that pattern. then, if you use clay, you could use paper towel tubes to make the tunnels the football teams or whoever walks out of. the seating will be kind of tricky. Since you made the clay cone gradually sloping, now youll need to levbel off sections like stairs all around, so you can place the seats on the ledges. be sure to stop the seating at some point.You can use the little pizza tables as seats, or just paste in pictures of chairs. dollhouse furniture might work. finally, paint it and place it on cardboard for a base. you might want to do that first. Hope your kid gets an A!
How do you make Working models on save environment?
One way to make a model on cleaning the environment is to create a model that shows the effectiveness of vinegar over other household cleaners that have harsh chemicals. You could also create a compost bin to show how items such as food scraps and grass clippings can be reused rather than tossed in the trash. The contents of a compost bin can also be used to improve the soil without the need for additional chemicals.
Well flute is a musical instrument but as you are asking about an action then obviously you are talking about making a pie which has got a method Fluting.
Fluting there in making pie or any kind of modeling is that you make wavy shape (pattern) all around your model or pie.
¤ø,¸¸,ø¤º°`°º¤ø,¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸ Like this if this makes sense.
What are the Working models for energy conservation?
working models for energy conservation are:- * * * * *
