MP3 Players Audio and Sound Systems

There are limitations in the technical quality of the sound you get with tapes. Problems with tape recorders: http://en.wikipedia.org/wiki/Tape_recorder There is wow and flutter with tape recorders: http://en.wikipedia.org/wiki/Wow_(recording) There are distortions k3: http://en.wikipedia.org/wiki/Tape_bias There are limitations in dynamic of the music: http://en.wikipedia.org/wiki/Signal-to-noise_ratio Cheers ebs

1.2 GB is bigger. A handy tool is google. Just search something like "1.2 GB in MB".

a 400 watt 2 channel amp should do fine. all you need to do is bridge the sub when it is being hooked up

If this is the only speaker you are using, use the Main Mix outputs. The stereo tape outputs will not be controlled by the Main Mix fader/knob. If you are using main speakers plus an additional monitor, use an auxiliary send on the mixer to allow the creation of an independent monitor mix.

Each byte has eight bits of information, i.e., either a 1 or a zero. A giga byte is 1,000,000,000 bytes of information or 1 GB.

the impedance of a speaker is a characteristic that is has. A 4 ohm speaker will always have a 4 ohm impedance and it cannot be changed.

If 2 speakers of 4 ohm impedance are wired in parallel, then the total impedance will be 2 ohms. Similarly, if you wire 4 speakers together, the total impedance will be 1 ohm.

Wiring a 2 ohm speaker to an amplifier rated to drive a 1 ohm load should work without any problems but expect the total power output to be somewhat lower than with a 1 ohm load.

lots of people.

You can get the iPhone at O2 the phone shop.

BIBLIA EN MP3 AUDIO

take the positive from speaker A and twist the copper wire together with the positive wire from speaker B. then take those two (positive) wires from A and B and put it in Channel 1 positive terminal. then take the negative from speaker A and twist the copper wire together with the negative wire from speaker B. take those two (negative) wires and put them in the negative terminal under channel 1. then do the same for your other 2 speakers, except in channel 2

A: A speaker has a magnet and the wire is suspended in a zone by a cone whereby +/- current will make the coil move up or down moving the coil and moving the cone causing air displacement as waves of pressure that our ears can detect as sounds in our brains.

High Fidelity

most of the time u can put the sd in, go to computer, right click on the sd drive, select format, the select the format, and click on reformat

Firstly, you will need to select all of the songs. Do this by pressing Shift and the down arrow to highlight a whole album. Secondly, make sure you have the item's artwork/video viewer shown in the bottom left hand corner. If it isn't you will need to click on the upwards arrow, which should be the fourth button from the left. Finally, copy and paste the album artwork you would like into the box in the bottom left hand corner and it should start processing it into each of the items you have selected. CAUTION: Be aware that you shouldn't select a song already containing album artwork as the item will then contain two images instead of one. However this will not be noticeable unless you are to go into 'Get Info' and 'Artwork'.

You can hook it up but it doesn't work right . I have one hooked up right now and it doesn't control everything properly.

Joe

In 1877, Thomas Edison (1847-1931) invented the phonograph, which originally used cylinders of metal or wax. The first true "record player" using disks was the "gramophone" patented by German-American inventor Emile Berliner in 1888.

gthgtrgerfgrefedstferygtrhg

I have an iPod Nano (5th generation) and it can play without headphones, as long as you don't plug the headphones in after you charge it.

Without lasers, many modern technologies would be significantly less advanced or entirely absent. For instance, optical communication systems, including fiber optics, rely heavily on lasers for transmitting data over long distances. Additionally, medical technologies, such as laser surgery and imaging, would lack the precision and efficacy they currently provide. Overall, fields like telecommunications, manufacturing, and medicine would face major limitations in efficiency and innovation.

www.pspube.com

An electromagnet drives the stereo speaker to provide the sound.

Yes it does.

In theory, four. 'Quadro' means 'four'. It's a four-way system.

In practice, anything between four and six. Designs with a center and a subwoofer are sometimes called 'quadrophonic', because they don't truly receive a 5.1 signal, but rather - derive the low frequencies using band-pass filters, and get the 'center' signal from somewhat-merging the front-left and front-right together.

Do keep in mind that anything driven from a stereo output is stereo, no matter how creative the hardware designers get. Pay attention to the number of jacks you get with a particular sound system - a 5.1 system will have three or four (good quality systems will also sport an S/PDIF connector, through which a 5.1 audio signal encoded using Dolby DTS or some other system can be sent), and a quadro system should have two stereo jacks.

Also, remember that in order to get more than two speakers, your amplifier/primary stage/device/computer must also feature more than one output for this purpose. If this is a PC, the software used for playback must also support these features. Regardless of the device, the source (DVD, music file etc.) must also provide more than two signals encoded on them, in order to enable quadro, 5.1 or 7.1 speaker configurations. If the DVD you're playing has only stereo sound, you'll only get stereo.

The square plug lines up with the slot only one way. Gently place it in the jack and rotate it while applying light pressure until it lines up and pops in