0
Remote Control Devices
A remote control device is commonly an infrared device used to control electronic devices such as televisions and DVD players. It is usually powered by AA or AAA size batteries.
2,009 Questions
Who invented the remote underwater manipulator?
It was first invented in 1986, I got that from my textbook so it should be right.
Where would one be able to find a list of Sky remote control TV codes?
There are many ways to find a list of your Sky TV codes. The simplest and most common way is to find the complete list at the official Sky support forum.
Here's the link for the manual's download. Plus, it has a Tech Support ph# and they were pretty good by me.
http://www.universalremote.com/search/?q=avex+r6
How do you program remote to unlock both doors on 2003 silverado?
You have to press the unlock button 2 or 3 times to get both doors to unlock no programming needed
Is remote dektop support available for personal use?
"Yes, remote desktop support is available for personal use. Remote desktop support for personal use is available with Window 7. Remote desktop support is used to improve a user's experience."
Infrared Object Counter Circuit?
http://www.industrycommunity.com/myforum/re_rogers/messages/261.html
Remote code polaroid DVD player DHM-0100?
1. Open the tray
2. Press SETUP
3. Press 1 3 8 9
4. With the arrows change the region code
5. Press SETUP
6. Close tray
What are the instructions for programming tv with dish remote?
You can find the process for programming a DISH remote to the TV below!
First, press and hold the clear TV button until all mode lights light up, then release and TV light will be blinking. Enter the code for that TV model and press #. The TV button should flash 3 times. After that, try functions (Volume, Power, etc..) and see if it is working. If there is no function, then repeat steps 1-4 with another code.
How do you program the remote contol key on a 2000 Buick LeSabre?
This is how it is performed on my 2000 Buick Regal LS
1. Sit in the driver's seat.
2. Close all vehicle doors.
3. Insert the key into the ignition and turn the key on, (DO NOT START) and then off.
4. Remove the key from the ignition.
5. Press and hold unlock on the door lock switch. DO NOT RELEASE UNTIL STATED
6. While holding the door lock switch in the unlock position, insert and remove the ignition key twice. Do not rotate the ignition lock cylinder.
7. Insert the ignition key a third time leaving the key in the ignition lock cylinder.
8. Release the door lock switch. You will hear three chimes. This chime feedback indicates that transmitter programming is active.
9. Press and hold the lock and unlock buttons at the same time on the keyless entry transmitter for 12 to 15 seconds. You will hear two chimes. This chime feedback indicates that the transmitter has been programmed successfully.
10. Repeat step 9 for the rest of the transmitters (for a total of 4 transmitters).
11. Exit this procedure by removing the ignition key from the ignition lock cylinder.
Answeryou will need the dealer tech 2 scan tool to do this AnswerAssuming you have "Pass key III", there is another way. The procedure that the manual recomends is for when the battery dies and your fob goes brain dead as a result. For lost fobs it's recommended that you get your car and fobs reprogramed so no one else can easily get at your car. The quick test to see if your fob needs to be resynchronized is to press the instant alarm (red horn symbol button). If that works and nothing else then resynchronize. Take your brain dead fob and press both the lock and unlock buttons simultaniously within range of the car. The manual says this should take about 8 seconds. Once the car has re-awakend your fob, the locks will cycle and what ever else your car has been programed to do when it locks and unlocks.How do i get rid of top and bottom cut off from my plasma screen?
its easy click I for info then click cut the it should
or get a knife!
I finally got a wii after searching the stores in my city for three months. I stood in lines for hours and made many phone calls to most of the stores without any luck. I decided to continue my wii search on line and ended up on a wii tracker web site. Their it was, the flashing in stock sign that stated amazon had the wii in stock for its retail price of $250.00.I highly recommend these wii tracker sites if you are trying to find a wii.
http://www.instockonline.org
http://www.wiitracker.com
