USB Flash Drives

I suggest you to Run check disk (chkdsk) and check if it helps.

Follow the below steps:

Step 1:Press Windows + X keys on the keyboard, click Command Prompt (Admin).

Step 2: In the Command Prompt, type the following command, and then press ENTER:

chkdsk / f

chkdsk /r

Step 3: You may be asked whether to schedule this volume to be checked next time when you restarts (Y/N).

Step 4: Press Y key on the keyboard and press Enter key.

Step 5: Restart the computer and check.

If you encounter any data loss issues while trying to fix the issue, you could use Bitwar Data Recovery to bring those files back:

Step 1: Download Bitwar Data Recovery from our official website.

Step 2: After installing the software, launch it and choose the USB that shows 0 bytes, followed by pressing the Next button.

Step 3: Now, you should choose a scan mode in this stage. You could select Quick Scan, which is capable of retrieving most of the lost files. If it doesn't work, then you could come back to this stage and then select Deep Scan.

Step 4: After this, select the file types you want to recover then press the Next button.

Step 5: At the end, preview data and press the Recover.

Two possible solution.

1. Some external USB device comes with external power supply. Please use it to increase the power to the USB device. They are normally about 5 volts.

2. Plug into the USB port on the motherboard rather than the front bay or through the USB hub, The reason is because the USB at the motherboard has more power.

Re: 1. They are ALWAYS 5 volts

Re: 2. The USB at the motherboard does not have any more or less power than a single hub or the front bay connection. Shared ports, like hubs, have the same current available per connection to the CPU.

Finally, power is not the cause of this symptom. It is caused by corrupt or missing DLL's.

November 14, 2010

I had the same problem with an Acer Aspire 5515. I plugged in an external hard drive to the front USB port and got the same error message. I then plugged in an 8GB flash drive but to no avail......same message. Finally, I tried devices in the rear USB that's on the motherboard and Eureka!!!! they both worked like they're supposed to.

With that said, both ports having different voltage has merit.

Universal serial bus

Yes Just save it under a different name

Flash RAM is used for temporary data, such as in a USB drive. Flash ROM is used for bios and system files.

Parallel sends and receives data simultaneously via multiple side by side routes while serial must wait for an opening. Imagine parallel is a four lane highway and serial is a single lane bridge flowing in two directions.

Flash memory is a term used for solid state devices. They are called solid state because they have no moving parts and the data is "flashed" to the device. Mobile phones use flash memory, USB storage devices or even large mass storage devices can be bought as solid state.

64?

SanDisk flash drives are widely available at a number of stores or online. One can find these flash drives at stores such as Best Buy, Staples, Radio Shack and Walmart. These are also available from sites such as Amazon and eBay.

how dcan you protect information stored on memory stick

Okay, fist you'll need a USB cord (Or a Memory stick adapter, which works better). Insert the adapter into your computer. Go to "Computer", then 'Memory Stick". Next, go to the Folder "PSP". Left Click and select "Copy". Copy it to your desktop or a place where you can find it. Now you format your Memory Stick. After that, Go back to "Comptuer" then "Memory stick and copy the files one by one into the correct locations. There. You have formatted your memory stick AND kept your data. :D

drive letter of an USB drive can be any letter from E to Z, It also can be D if you don't have DVD drive connected to the computer &C is the hard-disk drive needed for the Windows. It depends on the hard disk partition you had made.

Cannot be a problem if you have enough cache: go to the nearest hardware store.

It is an addressing limitation of the protocol. Theoretically it could handle 127 devices (The initial port/controller/hub is considered 1, otherwise it would be 128) but in reality you would run out of bandwidth long before you got to that point. Any usefulness of a chain of that size would be suspect at best.

You need a device like iPod, MixMax, MixStick, etc.

There is no reason you cannot load an operating system on a flash drive. However, getting the computer to recognize the flash drive and boot from it could be an issue.

SCSI is an acronym for Small Computer Systems Interface.

No the USB does not work to load and modify games when the PS3 software has not been modified

No you can not load or download games into or from the PS3 with the USB port

Just resave the file. The flash drive is represented as an ordinary file system. If you can change the date of a file on a hard drive, then you can change it on a flash drive.

it's basically a USB drive but here's the definition : A flash memory card that plugs into the computer's USB port. Small enough to hook onto a keychain, it emulates a small disk drive and allows data to be easily transferred from one machine to another.

No. You can back up your apps, and transfer your photos with iTunes with a USB connection. Apps can only be used on your iPad.

search on amazon.com

OPTIONAL

are there any usb headset mics.

A USB Cruzer is SanDisk brand of a USB Flash (Memory) Drive. Such a device stores just about any computer file type. SanDisk Corp. makes all kinds of USB flash drives, from 16 MB (mega byte) to 32 GB. (MB or GB is a unit of storage capacity, as in 0.016 GB = 16 MB or 32 GB = 32,000 MB.)

In the context of flash drives, gigabyte usually means 1,000,000,000 (10003). Note that this term has a different meaning in other contexts (in the context of RAM it means 10243).