They become thirstier, ironically.
It's an expression possibly originating from the 1960's and must be accompanied by a measurement usually shown from the ground to your hand showing how tall a person had been. "I first met him when he was Yea or yay high"
nope < they are like snowflakes all one of a kind .
i think they are all the same because sedimentary, igneous, and metamorphic rock can change into one another during the rock cycle so yes they are the same
WikiAnswers vs Yahoo! Answers - Both Great But... The key here is that on WikiAnswers the answer is dynamic. It can be edited and improved upon by multiple users, so that you have the most complete, well-rounded answer - with contributions from one or many different users.
Other key element is the merging of identical questions - so that when someone asks, "Why does a sliced apple turn brown?" and someone else asks, "Why did the inside of my apple turn from white to brown?" the questions will be merged into one; and in addition the answers will be combined, so that there are no repetitive questions and the result is a single, complete answer.
Yahoo! Answers, on the other hand, takes user questions and answers individually. There is no dynamic adding or improving to a single answer, but rather lists of answers submitted by individual users.
The three main differences in usage are the following:
More opinions from our users:
The time and use restrictions of Yahoo! Answers means that questions tend to be less frivolous (but not always), and there are few insults or foolish responses. The drawback is that there is less chance a good answer will be found within the allowable time window, and an asker may be given conflicting answers from which a correct one may be difficult or impossible to discern.
(For more information about WikiAnswers, click the Related Link below.)
(*Wiki s are provided subject to the Site Disclaimer at the related link below.)
Objective assessment of independently verified facts, concensus, and consistency. On the internet, it is generally good advice to be wary of uncited information.
The dilemma you present is inherent to all topics found on the internet. All you or anyone can do is find a site that is well regulated, & to check your answers with other sources.
You can't be certain how valid an answer is on a site like this where everyone is encouraged to provide answers.
It never hurts to do a little research on your own once you get an answer and see if the facts match up.
It also helps if people would mention where they got their facts.
And (this should be obvious) if a reply starts with something like "I'm not sure, but..." or "I think..."
And thanks to many helpful, responsible and knowledgeable people, incorrect information is often noticed and commented on.
Please bear in mind, too, that some questions relate to very complex issues and no single answer will be right in an 'absolute' sense. Obviously, a question like 'What were the underlying causes of WW1?' isn't comparable to 'How many yards are there in a mile?' The question about WW1 is still a matter of scholarly research and debate, whereas the question about yards in a mile is quite different. (Having said that, some answers will certainly be inaccurate). With experience, you may be able to work out whether an answer is well informed - whether the person who wrote it seems to have done plenty of reading on the topic or not. You may be able to develop a the ability to recognize answers that are a repetition of what the answerer learned at high school, and may now remember inaccurately. Some answers may be based on guesswork, and you may be able to learn to recognize these.
In general, one should be cautious about accepting a simple answer to a question about things that are complicated.
If you need to be reasonably certain about the accuracy of an answer, you should do the necessary research in the ordinary way, and treat the answer(s) you get here as possibilities, not as definitive.
If an answer is wrong, we hope someone with the right answer will fix it. You can report errors to the category supervisors.
Although an answer may not satisfy your question, in many cases it may indicate terms or corrections that will help locate your information.
Save the picture as a decal on roblox.com, then send the decal's URL through a message.
The most feared question of the job interview is "What is your biggest weakness?" There are many ways to get this wrong:
The worst thing to do is to admit a weakness that's so bad that nobody will hire you, such as: # I'm really lazy. # I can't control my temper. # I killed my last boss.
Don't do that. But people are so afraid of making this mistake that they do the opposite: They try to BS their way through this question by pretending a strength is a weakness.
# I'm so good at what I do that I make the people around me look incompetent. # I work too hard. # I care too much. Don't do that either. You'll come off as shallow, manipulative, and insincere.
If an interviewer asks you this question in an interview, he or she wants to find out if you can take criticisms, and if you can admit your flaws and mistakes. And that you're working towards either correcting them or working around them.
Don't just look at this question as a crisis to be survived. Look at it as an opportunity to shine.
Your best strategy is to admit a real weakness, calmly and sincerely, while also showing why I'd be so happy that I hired you.
Here's one example:
"Usually I'm able to inspire my team, and I usually do a good job aligning their passions and skills with the company's needs. But when I can't get a person to want to do the job, and I have to have the tough conversations, I struggle. That's when I have to turn to my manager for some guidance and support. Sometimes you've got to be tough, but it doesn't come naturally for me, and it's a real challenge for me when this happens."
That answer helps you show who you really are, and why I should hire you. You admitted a real weakness, and showed that you take it very seriously, but the weakness was wrapped inside a bigger strength. And in the answer, you showed me what you're passionate about at work.
Here's a final example: "When I sit in a bug-review meeting and somebody can say 'Lower the priority on that, raise the priority on that, defer this, close that…' I'm always so impressed, because I can't do that. I can't think that fast. I always need more time, to think about different perspectives. I wonder what's the problem behind the problem, and I try to find a solution that gets the best of all worlds. And that's great, when there's time, but you can't do that on every bug in your bugbase. I've always managed to complement myself with people who are really good at making quick decisions. And I've always positioned myself so I can apply my strengths, analyze the bigger questions, and propose solutions. But stress-free rapid-fire decision-making… I've tried, and I've found the best solution is to find people who are great at it and work with them."
This is a little riskier, because some people will never respect you for just accepting a weakness and working to your strengths instead. But it's often worth it, because even if it risks losing a job you'd be miserable and terrible at, it increases your chances of finding the job that matches your strengths. Note how in that answer you show where you can really help the company, and you show how much you appreciate other people and their skills.
Finally, these kinds of answers, if they're sincere and personal, will make you stand out. If there are a lot of people competing for a single job, your best bet is to stand out in a positive way, and ironically the "What is your weakness?" question is a great opportunity to do that.
In summary… don't just repackage a strength as a weakness. Take the risk, and admit a real weakness, but in a way that also shows off your strengths, your sincerity, and who you are.
No,you cannot.You can only answer open questions on Yahoo Answers.
You actually can answer the resolved question as soon as a user hasn't picked "the best answer." I remember I asked a question about dating and got so many responses, and I chose the response in regards to dream marriage and then marked it as my "best answer," and the rest of the questions were still there but other people couldn't reply anymore.
On Yahoo!Answers if you ask a Question then you will got different suggestion on that Question from different peoples and you to select best answer and you will get points.But on Wiki Answers,there can be only one answer to a question on Yahoo!Answers,people can improve it.
There are fewer people answering than there are people asking questions.
Also from a purely philosophical point of view, you cannot have answers without questions, so the amount of answers must always be less-than-or-equal-to the number of questions.
nvm, i figured it out. 6 hours. I think now there is about 40 minutes left.
Under US copyright law you can only use one or two sentences of someone else's copyrighted material and then only for specific purposes such as review, critique, or educational (see "fair use").
Even if it is your own copyrighted material, we still ask that you do not post more than one or two sentences. Anything you do post becomes part of WikiAnswers and any WikiAnswers Contributor can add, edit, or remove parts of it. This is essential to our "wiki" system of collaboratively growing FAQs. WikiAnswers Contributors can improve each other's answers. This wouldn't be possible if the original answerer wanted to keep the copyright to their answer.
So, I'm sorry to say, you cannot post copyrighted material whether you own it or not. If you posted your copyrighted text you'd be giving up the copyright. If you posted someone else's copyrighted text, we would need to remove it so we don't violate that person's legal rights.
If you have a FAQ of your own or see a FAQ on someone else's Web site that is copyrighted, here's what you could do. Post the questions as new WikiAnswers questions. In the answers, quote one or two sentences from the other site. Or even better, summarize the answers in your own words. Then link to the other site in the right hand column of the page under "More Information" where it says "Related Links." This would benefit WikiAnswers visitors and the owners of the copyrighted material.
Go to the Yahoo website
Click on "sign up" just under the search bar.
Create your new ID on the sign up page.
Do you mean a Microsoft Passport Network (or .Net Passport as it was previously)? If so, this is the generic sign-in portal: http://login.passport.com
Yes. It is free.
If you want a brand new account, simply go to this link and fill out this page,
First of all, the student should read the subject to get a good lead of the essay. Then, he should browse through the pages without actually reading line by line, this helps to get a general gist of the topic to be studied. The third and most important stage is reading through carefully and making notes were one thinks requires more stress.
Sign in and go to your Account security page. Enter your mobile number. Click Send SMS or Call me to get a verification code. Enter the verification code, then click Verify.
Is long reddish brown hair good wrestling
These are used to measure flow rate.Orifice Plate
With an orifice plate, the fluid flow is measured through the difference in pressure from the upstream side to the downstream side of a partially obstructed pipe. The plate obstructing the flow offers a precisely measured obstruction that narrows the pipe and forces the flowing fluid to constrict.
The orifice plates are simple, cheap and can be delivered for almost any application in any material.
The TurnDown Rate for orifice plates are less than 5:1. Their accuracy are poor at low flow rates. A high accuracy depend on an orifice plate in good shape, with a sharp edge to the upstream side. Wear reduces the accurVenturi Tube
Due to simplicity and dependability, the Venturi tube flowmeter is often used in applications where it's necessary with higher TurnDown Rates, or lower pressure drops, than the orifice plate can provide.
In the Venturi Tube the fluid flowrate is measured by reducing the cross sectional flow area in the flow path, generating a pressure difference. After the constricted area, the fluid is passes through a pressure recovery exit section, where up to 80% of the differential pressure generated at the constricted area, is recovered.
With proper instrumentation and flow calibrating, the Venturi Tube flowrate can be reduced to about 10% of its full scale range with proper accuracy. This provides a TurnDown Rate 10:1.Variable Area Flowmeter or Rotameter
The rotameter consists of a vertically oriented glass (or plastic) tube with a larger end at the top, and a metering float which is free to move within the tube. Fluid flow causes the float to rise in the tube as the upward pressure differential and buoyancy of the fluid overcome the effect of gravity.
The float rises until the annular area between the float and tube increases sufficiently to allow a state of dynamic equilibrium between the upward differential pressure and buoyancy factors, and downward gravity factors.
The height of the float is an indication of the flow rate. The tube can be calibrated and graduated in appropriate flow units.
The rotameter meter typically have a TurnDown Ratio up to 12:1. The accuracy may be as good as 1% of full scale rating.
Magnetic floats can be used for alarm and signal transmission functions.Pitot Tubes
The pitot tube are one the most used (and cheapest) ways to measure fluid flow, especially in air applications as ventilation and HVAC systems, even used in airplanes for the speed measurent.
The pitot tube measures the fluid flow velocity by converting the kinetic energy of the flow into potential energy.
The use of the pitot tube is restricted to point measuring. With the "annubar", or multi-orifice pitot probe, the dynamic pressure can be measured across the velocity profile, and the annubar obtains an averaging effect.
umm this will be on failblog by the morning
saya mempunyai email di G-Mail jg Ada di Yahoomail.Jadi saya pny 2 Email,yang di G-Mail mau saya nonaktifkan,gimana ya caranya?
Give me food and I will live give me water and I will die what am I?
Asked By Wiki User
What is the biggest number you can make using the digits 641?
Asked By Wiki User
Why is TikTok getting banned in the US?
Asked By Amie Smitham
What is exponet of 7x10x10x10x10?
Asked By Wiki User
Why do I get a pop-up that I was logged out of Yahoo chat if I have never used it?
Asked By Wiki User
What is fulform Yahoo?
Asked By Wiki User
How to change password and secret questions of an yahoo email account?
Asked By Wiki User
What r the name of 4 vidas?
Asked By Wiki User
Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.