How do you change the front drivers side headlight on a 2003 Acura RSX type S?
the front bumper needs to come off in order to take the headlight assemblys out
Not true, you can actually replace the drivers side headlight without removing the bumper however its not an easy job. Best thing to do is bring to the dealer which will cost you around 30 bucks to do. Its a pain in the a$$ if you do it yourself though, and is probably not worth your time to do it yourself.
What is the 0-60 time for Acura rsx?
6.1 seconds.
Quarter Mile is 14.8 seconds.
This is for the 2002-2004. The 05 and 06 are slower.
http://www.albeedigital.com/supercoupe/articles/0-60times.html
Change a brake pad on a 2004 Acura RSX?
Lift the car, remove the tire, remove the brake shoe/caliper and remove the old brake pad. Slide in the new brake pad, replace the brake shoe/caliper, replace the tire and lower the car.
How do you remove the tail lights on a 2003 Acura RSX?
There are are few bolts on the back of the tail light that can be accessed from inside the trunk. Then there are two screws on the bottom of the lights that can be accessed by laying underneath the rear of the car and sticking your hand up behind the rear bumper.
How much horsepower does a 2008 aura rsx-s?
wow um first off the rsx was only made between the years 02 to 06 so there is no 08 model lol
I need answer to this ? also
How many miles to a gallon does a Acura RSX get?
If you dont get on it, you should get 30-33 mpg on the highway. 25-29 city.
How do you remove cruise control panel in a 2002 Acura RSX type s?
search the forum:
http://forums.clubrsx.com/
all your answers.
How do you take front bumper off an RSX?
To remove the front bumper remove the following: 12 plastic clips, 6 accessuble on the top, 6 accessible on the bottom 6 screws on the bottom. Bumper hangs on a series of hooks (6) just beneath the headlights.
Where are the oxygen sensors located on a 2002 Acura RSX Type-S?
The sensors are located on the catalytic converter. There are two of em; one closer to the downpipe and the other in the middle driver side of the cat. They are a pain to get off with the heat shield in the way. Best tool to use is a 22mm open ended heavy wrench. *Do not replace with universal o2 sensors* I know oe sensors are expensive, but you're just gonna have to bite the cost. Universal sensors do not work.
Why does a 2002 rsx power windows power door locks and moon roof not to function?
you need to reconnect the battery
Can you supercharge an automatic trasmission?
yes. i have a grand prix gtp. its auto with a supercharger
Can you change the bulb in the headlight of a 03 rsx without taking the headlight out of the car?
Its nearly impossible. Well it is possible but you will scratch the bulb, or break it.
How do you change the thermostat in a 2002 Acura RSX?
You have to replace the whole thermostat housing assembly. The thermostat housing can be found at the end of the lower radiator hose on the passenger side of the engine. It is jammed in there, but you can get to it without removing any other piece of the car. Two (left and right) of the three bolts can easily be removed by coming up from the underside of the car. The top bolt is easier to remove by coming down from the top of the engine compartment, setting/holding the ratchet, and then allowing another individual go underneath and do the ratcheting. It's best to have a helper with small hands to help the individual underneath guide the ratchet and hold the socket on to the bolts. This is done by using the small hands and coming down through the top, while the other individual comes up through the bottom. The bolts are 10mm and also, don't forget to drain the coolant first.
Acura rsx type-s 2006 stereo code?
Stereo codes are unique to each stereo and you will have to get the serial number from the stereo and call an Acura dealer for the code.
How do you tell if an Acura RSX is type S or base?
The type-s for the rsx has a 6 speed manual transmission.
Where is the knock sensor located on a 2004 Acura RSX base model?
The knock sensor on a 2004 Acura RSX base model is located on the engine block, specifically on the front side, beneath the intake manifold. It is typically mounted on the cylinder head or engine block, near the cylinder bank. To access it, you may need to remove the intake manifold, as it can be somewhat hidden.