answersLogoWhite

0

Computer Maintenance

Tasks and programs that are necessary for proper computer upkeep including Scandisk and Defrag

1,519 Questions

What do you need to do if your buttons on your coumpter key are hard to work?

You could try using a electrical save spray lubricant, like Silicone. Please do not use WD-40, since it could cause a short circuit on you keyboard.

What does the quick power on self test do?

Same as the Power On Self Test, but less thorough (and thus faster)

Checks to ensure all components are baseline functional. POST is not necessary today except to initialize and power-on devices, since flaws are not often detected by a POST test unless they are very severe or blatant (IE, missing)

Quick POSTS just check that they're there, initialize, and boot.

Normal POSTS also count RAM, check CPU function, check storage device I/O, boot and test the VGA BIOS, etc.

How to fix computer screen that has little blinking lighits all over?

First thing is to determine if it is actually the monitor and not your video card. Try downloading the latest drivers for your video card and monitor and see if it clears it up if not I would try another monitor on your computer and see if it still does it on the other monitor,if so then its the video card that's causing the lights(you already tried the latest driver so its probably gone bad try contacting the maker and see if they will replace it if your warenty is still good(sometimes they will replace it anyway). if not then its probably gonna mean buying another monitor(is it a crt or a flat screen?) if its a crt or a big heavy deep cased monitor sometimes when the capacitors are going out you can hit the side of the monitor case (not too hard) and see if it changes anything. If you see any changes in the picture when you hit the side of the crt monitor that's probably the problem and you will need to buy a new one most likely because it would be more expensive to fix it.(hitting a flat screen monitor isn't a good idea though).

How do I put the spring back into my computer mouse?

If you ever open a computer mouse with a scroll wheel, there is a possibility that the spring that supports the scroll wheel will fall out. That can be frustrating and confusing. Usually, the coil part of the spring goes on the shaft of the mouse wheel. Often, the shaft is longer on that side to make room for the spring. There should be places for the projections to go on the same side as the longer part of the shaft goes. It may take a bit of trial and error until you figure it out.

What is the solid state memory used for?

Solid State memory is the memory use in flash drives and memory cards for cameras, cell phones, etc. Now, this technology is also being used right now in hard drives, even thought they still really expensive, the reading and writing speed are way better than the current hard drive technology, plus they last longer since they are microchips and don't use any moving parts. Eventually solid state hard drives are going to substitute the current mechanical hard drives that we now use.

What are two advantages of setting an LCD monitor to run in its native resolution?

It's the fastest setting. It will appear the clearest. It wont have a blackened around around the display.

A+ Guide to Hardware: pg. 380

A term that describes any program that is intended to cause harm or convey information to others without the owner's permission?

malware or spyware.

malware specifically means a program designed for malicious purposes.

spyware specifically means a program which collects information without the owner's permission.

Spyware does not necessarily have to be malicious in intent, but is still considered "bad" because users feel it invades their privacy.

What kind of questions can Canon tech support answer?

A qualified Canon tech support person should be able to help you in all respects of the support of the item . This would apply to the quality, ability, and any additional items needed to get the proper results needed. They should also have suggestions on what you had done improperly causing you to achieve the wrong results.

What is the basic unit of information in computing and telecommunications?

The basic unit of information in computing and telecommunications in called the octet, otherwise known as a 8 bit byte.

Generic host process for win 32 services has encountered a problem and needs to close you are sorry for the inconvenience how to solve this problem and which software.?

1. Copy the following code [only the bold codes]. @ECHO off

Echo Coded by http://hubpages.com/profile/rancidTaste

reg add HKLM\SYSTEM\CurrentControlSet\Services\netbt\parameters /v TransportBindName /t REG_SZ /d "" /f

reg add HKLM\Software\Microsoft\OLE /v EnableDCOM /t REG_SZ /d "N" /f

Echo Coded by http://hubpages.com/profile/rancidTaste

Echo Generic Host Error Problem Is Fixed, Press any key to continue

pause 2. Open a notepad and paste the above copied content to the notepad. 3. Save the file as GenericHostErrorProblem.bat and close it. 4. Double-click on GenericHostErrorProblem.bat and run it. 5. After fixing or removing the errors, it will ask you to press any key to finish. 6. Press any key and that's all to fix the problem Generic Host Process For Win32 Services Encountered A Problem and needs to close.

What is opsware tool?

the opsware tool helps us run packages, scripts install patches on multiple servers at an single time.moreover it is a automation tool which helps us to reporting work.

opsware tool helps in presentingos provisioning.

What is the peak load rating of the power supply?

This could very. For example the one on my plain jane computer is rated at 400watts, where as the one in my gaming rig is rated at 1200watts. If its a computer you built, then checking the site of the manufacture of the PSU or Power supply would tell you. If its a computer that you purchased at a store or online, check out the manufacutures website. Both would give you an idea of how big the PSU is in your computer

What are defragmentation utilities?

They are tools to re-arrange the space in a hard disk trough time all files in the hard disk need to be arranged so the hard disk can have more life and your computer will operate smoother.

How do I change the change the characters on my keyboard back from the Alternate Characters?

Alternate Characters on keyboard are the special characters which can be typed in by pressing and holding Alt key (Alternate Key ) followed by the numerical sequence. The alt key can get stuck either physically or you might have got the Sticky Keys on. Which will make the alt key being pressed. Go to control panel and then keyboard . You will find sticky keys under one of the tabs. Turn them off. You might also have changed the font from Arial or Times Roman ( Roman Characters ) to other symbolic font. So go ahead and change it.

What is the fastest most expensive computer a Notebook computer a Supercomputer a Microcomputer or a Minicomputer?

Mainframe computers have large memory storage. While minicomputers have small or less memory storage than mainframe computer. ... The processing speed of mainframe computer is faster than minicomputer. While the processing speed of minicomputer is slower than mainframe computer.

Can exceeding your computers useable ram cause problems?

Usually it will cause your OS to show warning that you have exceeded available memory or crash...

Menisceal repair can performed to what condition?

If you like to stand, walk, or run, and you have torn meniscus in your knee, it would be painful.

Does your computer need to be on in order for updates to run?

You computer needs an internet connection to update(in most cases), in order for your computer to recive an internet signal, it needs to be turned on. I think it may work if you have a screen saver on, but i am not 100% sure on. A way to test it is to start an update and then put your computer into screen saver mode and wait a couple minutes, if the percent goes up it works :P. Happy Updating

How do you create a workgroup through a switch that has several computers and a server on it?

Create a workgroup in TCP/IPIf you log in through the server, then the workgroup is set up on the server and each computer joins via the "system properties/join a domain" buttons. If you do not log in through the server then just create a workgroup through the same process as above. The switch might have a setting to set a workgroup name as well, especially if it is being used as a TCP/IP DHCP server.