0
Dodge Intrepid
In this category you can ask questions about Dodge Intrepids. These questions can include where to find parts, how to get help, or how to do it yourself.
1,915 Questions
Where is the starter solenoid located on a 2004 dodge intrepid?
It's attached to the starter itself. If I remember correctly, that's a front wheel drive car, so the engine will be in a transverse layout (the cylinders go side-to-side, rather than front to back). The starter will be mounted to the bell housing, which should be on the left side of the car (driver side), at the end of the engine block.
Is there a timing chain on a 1999 Dodge Intrepid?
2.7L has a chain
3.2/3.5 has a timing belt.
2.7L has a chain
3.2/3.5 has a timing belt.
Where is body control module on a 1998 Dodge intrepid?
It is under the dash, driver side. Attached to the fuse box.
time to get a watch! :)
Can a double din fit in a 2002 dodge intrepid?
No. It is not able to fit in the radio slot. If you take the stock radio out, and try to slip the Double-Din radio in, it will not even fit. Even if you cut it, you still have to re-cut the holes for the mount. Because the Double-Din radio runs into the mounting holes.
What type of coolant it takes for a 2004 Dodge intrepid?
Red, 5 year, HOAT type.
Red, 5 year, HOAT type.
Where is the on board diagnostic port 2 on a 1995 dodge intrepid?
Under the dash on the driver side. It is a six wire probably blue connector. It is OBD1, OBD2 wasn't until 1996
Under the dash on the driver side. It is a six wire probably blue connector. It is OBD1, OBD2 wasn't until 1996
How do you replace the multifunction switch on a 1997 intrepid?
- Remove the tilt steering lever.
- Remove the steering column cover.
- Unplug the wire going to the switch.
- Now you can remove the bolts that hold the switch to the column.
An instructional video of how to remove the multifunction switch on a 1993-1997 Dodge Intrepid has been included below.
Where is the govenor pressure sensor on a 2003 Dodge Intrepid?
All pressure switches are part of the solenoid pack inside the trans, on top of the valve body.
What does it mean if a check engine light comes on in a 2002 Dodge Intrepid?
It means that there is a problem with the emissions system. Have the computer scanned with an OBD2 scab tool to retrieve the code that has been set.
Does the 2004 3.5 Dodge Intrepid have a belt or chain?
The 3.5 litre V6 engine in a 2004 Dodge Intrepid has a timing BELT
What does Diagnostic code P0700 mean for dodge Intrepid?
Trouble code P0700 means:Transmission control system malfunction
How do you replace the bushing in a rack and pinion in a 97 Dodge Intrepid?
To replace the bushing in the rack and pinion of a 1997 Dodge Intrepid, first, lift the vehicle and remove the front wheels for better access. Next, disconnect the tie rod ends and any necessary linkage to the rack and pinion. Remove the rack and pinion assembly from the vehicle, then carefully extract the old bushing and install the new one. Reassemble the components in reverse order, ensuring everything is properly secured and aligned.
What is the spark plug gap on a 1999 Intrepid 2.7?
Where is the camshaft position sensor on a 1994 Dodge Intrepid?
On the driver's side, in the timing cover in front of the valve cover, if it's a 3.5L. Please specify if its a 3.3 or 3.5L
