0
Dodge Intrepid
In this category you can ask questions about Dodge Intrepids. These questions can include where to find parts, how to get help, or how to do it yourself.
1,915 Questions
What does diagnostic code P0068 mean for Dodge Intrepid?
P0068 MAP/MAF - Throttle Position Correlation
symptoms
Engine will run rough, or idle rough
Engine may not accelerate well
May have a dead spot in acceleration
Cause
Dirty air cleaner, or obstruction in air flow
Vacuum leak between the MAF and intake manifold
Leak in the intake manifold
Bad sensor or connectors
Bad throttle body
Blocked hose from intake manifold to MAP sensor
the fix
Repair any vacuum leaks, inspect all hoses and connections
replace air filter or remove obstructions
Repair or replace any bad wire connectors
Clean any hoses that are gunked up
Test and or replace the MAF, TPS, and MAP sensors
What are signs that the struts may be bad?
Go to this link to learn all about shocks and struts.
http://free-auto-repair-advice.blogspot.com/2007/05/shocks-and-struts-what-they-do-when-to.html
Rick
I'm a retired ASE Master/L-1 Technician. I still keep current with the latest automotive technology. Visit my blog for cool articles and TSB's: http://free-auto-repair-advice.blogspot.com
In a nutshell, they recommend replacing struts about every 80,000 miles depending on your driving conditions. I replaced mine at 135,000 on my 1999 Grand Prix. It started bouncing too much on the bumps and making a creaking noise on bumps.
Where is the starter motor located at on a 2001 Dodge Intrepid with a 2.7 L engine?
Driver side of the engine. look reward of the motor mount.
Dodge Intrepid ABS and Trac Off lights on?
Those lights stay on when there is a malfunction in the ABS or traction control system. You need to have the system checked for codes with a scan tool.
How do you diagnose power steering leek on a 1997 Dodge Intrepid ES?
Clean and dry wet area as best as possible then take it for a drive. After a short drive, drive it up on ramps or jack up the front end and support vehicle with jack stands. Use a light and look for the source of the leak. Once you have determined the source re-post your findings on this site and we will help you from there.
either a short or a couple of blown fuses.
What should the tire pressure be on a 2003 gm 1500 truck?
Listed in your owner's manual and on the driver's door post.
1994 Dodge Intrepid dome lights how are they controlled what tells them to dim and then shut-off?
The Body Control Module (BCM) controls this function
Rick
I'm a retired ASE Master/L-1 Technician. I still keep current with the latest automotive technology. Visit my blog for cool articles and TSB's: http://free-auto-repair-advice.blogspot.com
How do you replace an oil pan on a 1997 Dodge Intrepid 3.5 engine?
You must first remove the bolts that hold the sway bar to the engine cradle to swing it back out of the way. You must also remove the engine to transmission brackets to access some of the oil pan bolts. Then you will be able to remove all bolts and drop the pan.
take out from the top and take the tranny with it it makes it alot easier to reinstall or install a new motor that way it all goes in at one time
My 1993 Mitsubishi engine wont start engine turns but don't start what do you do?
You must remove the aluminum Intake manifold ( upper & middle portion only ) to access the spark plugs. It's best left to a Professional Mechanic to do the job. The cost can vary. Look at atleast $400.00.. Just as a side note. The biggest hassle will be putting all those hoses & wire plugs you disconnected back in the right spot. The other is locating the proper bolts ( under all those hose & wires ) to remove the intake. Remember that this intake manifold only breathes air so no antifreeze BS to worry about. If you have the proper tools, patients & alot of time you can do it. I suggest perhaps taking some digital photos of the engine before you dig in - it will assist in getting some hoses back to the right spot ( label or color code hoses & wires first ) Good Luck ! And I will be doing this this weekend!
Changing the sparkplugs and wires in the Montero Sport, regardless of the year, is not an easy task. If you are not mechanically incline, then take it to the dealer and pay them to do the job....should run about $300 to $400. If you are mechanically then you may attempt to do the job yourself by following the step by step instruction on the web link listed here: http://www.monterosportonline.com/diy-perf2.html
Good luck!
Will a 2004 dodge stratus motor fit a 2003 Dodge Intrepid?
Will a 2004 Dodge stratus motor fit into a 2003 Dodge intrepid car with a 2.7 engine?
What is the oil capacity of a 1995 Dodge Intrepid?
5 quarts for the 3.3liter 6 quarts for the 3.5liter
A buzz bomb is a small, jet-propelled flying missile which carries a bomb, especially used to refer to the doodlebug.
What does the code p1776 on a 2001 Chrysler 300M mean?
Trouble code P1776 means: Solenoid switch valve latched in the LR position
Firing order 3.5 liter 1994 Dodge Intrepid coil pack?
Firing order: 1-2-3-4-5-6
Click link for photo of setup.
Where are the freeze plug locations on the Nissan VQ40de motor?
The freeze plugs on the Nissan VQ40DE engine are typically located on the sides and rear of the engine block. There are usually two to three freeze plugs on each side of the block, and one or two at the rear. These plugs help prevent coolant from freezing and causing damage to the engine. It's important to check these plugs for corrosion or leaks, especially in older engines.
Where is the oxygen sensor located in a 2002 Dodge Intrepid?
There are four oxygen sensors on a 2002 Intrepid. There is one before, and one after the catalytic converter on each side of the engine.
The weep hole next to the thermostat housing (lower hose) is from the water pump.
The weep hole next to the thermostat housing (lower hose) is from the water pump.
