How do you get the radio code for a 2007 Honda Pilot?
First check to see if the dealer (or prior owner) may have written it down somewhere in your owner's manual. If not, I'm told that on the newer model years, that when the word "CODE" is displayed in the tuner window, press buttons 1 and 6 simultaneously. The number that is displayed is the radio serial number. Either call Honda's customer service 800 number, or go to your local Honda dealer - give them the serial number and they should be able to supply you with the unlock code. If that doesn't work you will have to retrieve the radio serial number off the tag that is either on the back or the bottom of the radio case. You will have to slide the radio out of the dash to get to them.
Look in the glove box and it should be located on the side on a white label. If not you can go to the Honda Owners Link and get it once you sign up.
How do you reset the oil life indicator in a Honda Odyssey 2005?
First, turn the ignition key to the "On" position. (Engine doesn't have to be running.) With the dash display showing the current oil level, press and hold the odometer button until the display flashes. Release the button, and then press and HOLD again until the display resets and shows "Oil Life 100%."
Is there a fuse for the air conditioning blower on a 2004 Honda CR-V?
There is an air conditioning blower fuse on the 2004 Honda. The fuse is in the fuse box. The fuse box is located in the engine compartment.
Must a timing chain on a 2005 Honda CR-V have to be replaced?
Supposedly they are lifetime parts. However like all things mechanical, they are subject use and abuse, and wear and tear. Depending on how many miles are on the vehicle and how it was maintained will be a significant factor.
What does it mean when my Honda CRV 1998 CD player does not play and keeps on flashing PEO?
Its broken.
How do you change the fuel filter on Honda CR-V 1999?
This job should be done while the engine is cold and the ignition switch is in the OFF postiion. The filter is located on the firewall of the engine compartment. (1) Relieve the pressure in the fuel system by opening up the gas tank filler cap and opening the fuel line at the fuel filter by loosening the banjo bolt. (2) Place towels around the filter and remove the banjo bolt and unscrew the threaded fitting. Remove the clamp bolt and lift the filter out of the engine compartment. Re-installation is the reverse of removal.
What is the rear head room of the 2002 Honda CR-V?
The 2002 Honda CR-V has 39.2 in. of rear head room.
What ground clearance does the 2005 Honda CR-V have?
The ground clearance of the 2005 Honda CR-V is 0 ft. 8.1 in. (8.1 in.).
Where is the fuel filter located on a 94 Pontiac firebird and how do i change it?
Why do 2000 Honda CRV driveshafts carrier bearings and u-joints break?
Lack of lubrication would be the primary reason. Although another possibility might be that the engine is being over-revved at the time the OB computer senses the need to engage the AWD capability and the shock of the sudden engagement, while being over-revved, snaps the joints.
How do you know if a 1998 Honda CR-V fan sensor has gone bad?
The best sign is if - the temperature gauge goes into the overheated area and the fan doesn't come on. However, that may be a sign of MORE than just a bad heat sensor. The entire electrical circuit for the cooling fan will have to be looked at (i.e: fuse - heat sensor - fan relay - fan motor - has a wire or connector come loose). Any one (or more than one) could have failed. Hondas are notoriously reliable but, let's face it, the vehicle 12 years old.
Code P1399 means:Random missfire Plugs not gaped right might want to check them since you just replaced them or plug wire loose?
The proper oil to be used in a Honda CR-V is 0w-20. The engine can still manage well with higher weighted oils such as 5w 20.
What size wiper blades do you need for 2007 to 2011 Honda CR-V?
The 2007-2011 Honda CRV wiper blade sizes are 26" drivers side, 17" passenger side and a special 14" rear wiper that is difficult to find in the stores. See sources and related links below for more information. Since there are currently over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
NOTE: It appears this wiper configuration was changed for the 2012 generation of CRV's...don't assume - look the 2012 up.
How do you change 2002 Honda CR-V automatic transmission filter?
It does not have an external filter. You have to drop the transmission pan and clean it as wll as the screen contained within it.
Does a 1999 Honda cr-v 4-cylinder have a timing chain or timing belt?
It has a timing BELT - recommended replacement mileage is 105,000 miles. CAUTION: This engine is an "interference" engine. If the belt fails while the engine is running it will cause major damage to the engine.
What is the base engine size of the 2003 Honda CR-V?
The 2003 Honda CR-V has a 2.4 L base engine size.
What year CRV? Mine has no warning light that comes anywhere close to that description.
How do you disable the alarm on a 2004 Honda CRV without the remote?
when I replace the fuse for the interior lights on my 2004 CVR the alarm sounds, can I simply disconnect the power to the alarm (if I can locate it) to disable it,......
Where is the plug in for a scanner on a 2004 Honda CR-V?
Hidden underneath the right side of the center console.
How do you get into tail lights on 2002 Honda crv to change light bulb?
Open the rear glass hatch. This will expose the mounting screws that hold the taillight lenses to the body pillar. Remove the screws and careful pull the lens away from the pillar. This will expose the wiring leading to the bulb socket. Gently twist the socket while pulling out on it, revealing the bulb. Replace the bulb. Installation is the opposite of removal.
If it is the "service reminder" warning light - look closely at the very bottom right side of the speedometer housing in the area where the trip odometer reset switch is and you'll see a black plastic key slot. You can turn it off by inserting the ignition key into this slot and slightly pushing inward.