0
Interior Design
Planning the furniture placement and layout of the inside of a building is what Interior Design is all about. It is the branch of architecture that deals with the selection and organization of furnishings for an architectural interior.
5,109 Questions
Comes in a variety of thicknesses, from 30mm down to 3mm. Can be cut, drilled and routered cleanly ,and can be sanded very smooth. Easy to seal and paint, with very good adhesion. Sonically inert, so is the best material for speaker enclosures. The thicker MDF is strong and rigid, and the thinner sheets can be bent into even , smooth curves, making it an excellent pattern an mould making material. Cheaper than solid timber. Glues together strongly with PVA glue. Polyester fillers (body filler) sticks well . Its main disadvantage is that it is not waterproof.
Cost per foot to install drop ceiling?
It depends on what the people that estimate your particular job in your localized area feel they can get from you and how much the particular ceiling material costs, and how difficult an installation it might be. Get estimates from local contractors which have done good work for your neighbors and friends.
A laundry room is a designated room in the home where clothes and linen are washed, dried and pressed. There is no standard or average size of a laundry room so you can design yours in such a way that meets your needs.
What is the standard spacing for coat hooks?
The standard coat hanger is 17 inches long. However, coat hanger dimensions vary in size just as much as they vary in design and styles. Materials used to make coat hangers include: wood, plastic, and metal.
How do you tone down yellow paint?
To tone down yellow paint, you can paint over it with a different color. You can also add white to the paint.
How do you build a table for 12 people?
You might need the 108" and it probably would not fit in your dining room. I do not know if the 72" would even fit there, or if it would be large enough. You might be better with a rectangle or oblong table.
How much fabric is needed to make a full size bed duvet?
Hi, I just came back from the fabric district yesterday. I got some material to make a duvet for my daughter's king size bed. You need 11 yards according to an employee at Michael Levine's in Los Angeles.
How do you take glue off a painted wall?
You can try scraping it off with a putty knife. If you happen to gouge the drywall in the process, use drywall mud over the spot, smooth it over with a putty knife. After it dries, try sanding it. If it is still not flat, scrape on a bit more drywall, allow to dry and sand again.
Use a miter box or a miter saw.
First, some assumptions:
A) The moulding used has a 45 degree "spring" or slope.
B) the corner you are cutting, inside or outside is 90 degrees.
There are 2 ways to do this, depending on whether you have a simple mitre saw, or one with compound mitre/bevel capability.
1) Using a mitre saw ( no compound bevel capability):
Place the "top" (ceiling) edge of the moulding closest to you, on the saw bed.
Place the "bottom" edge on the fence of the saw.
Position the molding at a 45 degree slope between the bed and the fence.
The molding is now bridging the bed of the saw to the fence at 45 degrees.
Set the saw mitre to 45 degrees and cut the molding
Cut.
For the mating piece, reverse the blade miter and bevel, and cut with the material pointing from from the opposite side of the blade.
2) Using a compound mitre saw (compound miter & bevel capability):
Place the back of the moulding flat on the bed of the saw.
The "bottom" edge goes against the fence
The "top" (ceiling) edge is closest to you.
Set the saw miter to 35.3 degrees
Set the blade tilt (bevel) to 30 degrees.
Cut.
For the mating piece, reverse the blade miter and bevel, and cut with the material pointing from from the opposite side of the blade.
If the angle, or "spring" of the moulding is not 45 degrees ( 38 degree moulding is quite common, fro example), or: If the corner is not 90 degrees, then you will need a table to work with.
These may be purchased here:
http:/www.compoundmiter.com/chart.html#cr-mld-table
I also found free ones here:
http://www.extremehowto.com/xh/article.asp?article_id=60354
And, Remember to protect your fingers!
How do you make a woven wall covering?
To make curtains, you will have to first measure your windows and the length you want. Cut the fabric with two inches seam allowance on each side and bottom, and eight inches on the top. Then sew your seams, and sew the top edge as a tube through which to run your curtain rod.
How much does it cost to remove vinyl siding on a house?
Unfortunately there is no magic formula as you need to consider thickness of siding, location (close to ground, several stories up, etc.), access routes, local landfill costs, etc. You should contact an asbestos removal contractor is your area for a proposal.
What is the average size of a two bedroom house?
It depends on the zoning and the area and year the house was built but it could be from anywhere between 1,500 and 3,000 Sq Feet.
Can you get a list of the retired home interior figurines?
I also have some for sale, please email tommyguz@gmail.com
I have some for sale. I have about 22 of the like "evening of romance" , 'lady Caroline and Victoria the are in mint condition in a glass case , email me and I can send you pics j.green4178@comcast.net
I am looking for a home interior homco masterpiece Jesus with Joseph The Carpenter figurine... I do not have the item number and am not for sure of the name of the item... it was a hostess gift. If anyone has one for sale please contact me at jcpetw@aol.com
Can you make a semi gloss paint into satin gloss?
If you have the required satin or semi-gloss base product and pigment, you can.
What color laminate flooring to go with hickory cabinets?
A bronzed birch laminate flooring will best match bleached oak cabinets. The dark color of the wood flooring would really compliment the pale colored cabinets.
What is the average size of a master bedroom in a mansion?
a mansion is 5,500 sq feet or bigger to be considered a mansion
Another answer:
How big does a house have to be to be a Mansion ?
Answers vary.
Some people say the limit is 5,500 sq feet or greater.
Some people say the limit is 7,000 sq feet.
Some people say the limit is 8,000 sq feet. This answer also mentions that a mansion is typically three levels tall and must have several rooms on each level.
Where to use Philips screw driver?
Answer A: At Phillip's house, as it belongs to him, or with his permission.
Answer B: A Philips screwdriver has a head shaped like a plus sign, and can be used in any screws or bolts which include a plus shaped slot on the head
How do you repair pleated window blinds?
Fusing string is a very helpful technique to know when doing blind repairs and can be also used for other projects that use polyester sting. This technique does not work on cotton string, or other non-synthetic string.
anydoor.com.au
What is the value of a Drexel Travis-Court Collection buffet with the numbers 357-39? November 49 also on the back
What is the average height of a towel bar above the toilet?
If one is extended from the wall more than the other that one should be set about chest high then the one closer to the wall about 6-8 inches above it. otherwise they should be about armpit height.
What is a Martha Bedspread? And can you tell me where to buy one?
Would a queen bed skirt fit a full size mattress?
Short answer: No.
A U.S. full size mattress is 54 inches wide and 75 inches long.
A U.S. queen size mattress is 60 inches wide and 80 inches long.
There is a tiny possibility that a full fitted sheet that has extremely deep sides might have enough extra fabric to cover a queen, but it would not fit well, if at all, the corners would not match up at all, the points would be on the top edge of the mattress.
Can you stain a carpet another color?
You can have it dyed. However, if it is an older carpet or extremely worn in some spots, the carpet may not be receptive to being re-colored. Maybe try using varied sizes of throw rugs instead.
