What is the top speed of a Yamaha big bear 350?
The top speed of a 2012 Arctic Cat 550GT TRV is approximately 62 mph on a hard packed surface. If a top speed run is done on loose gravel or sand an approximately 52-54 mph top speed can be expected.
Can you put a front fork assembly form an 1985 Honda 200X ATC on to an 1984 Honda 110 ATC?
It is unlikely that the front fork assembly from a 1985 Honda 200X ATC will fit directly onto a 1984 Honda 110 ATC. ATC models have different frame dimensions and component designs across model years, leading to variations in mounting points and compatibility. It is recommended to find a front fork assembly specifically designed for the 1984 Honda 110 ATC for proper fit and function.
To install an outer fairing from a 2000-2006 Electra Glide Standard onto a 2003 Police Road King, you will need to purchase a fairing mounting kit specific to your bike model and the fairing year range you mentioned. Ensure that the mounting kit is compatible with both the Road King and Electra Glide fairing. It is possible to install the outer fairing without the inner fairing, but you may need to make custom adjustments for fitment. Consider seeking assistance from a professional or a knowledgeable source for guidance during the installation process.
How many gallons are held by a 1998 heritage softail classic?
A 1998 Heritage Softail Classic has a fuel tank capacity of approximately 5 gallons.
What is the lowest temperature the BMW K1200gt can operate?
The BMW K1200GT can typically operate in temperatures as low as 35°F (1.6°C), but it is recommended to refer to the manufacturer's guidelines for specific details on cold weather operation. It is important to take precautions such as using the correct winter-grade oil and allowing the engine to warm up properly before riding in cold temperatures.
Dirt bikes come in many different sizes are depending are the size you are. There are different sizes for example: 50cc, 80cc, 110cc, 125cc, 150cc, 250cc, 450cc.
How much oil does your 98 Yamaha grizzly 600 take?
The 1998 Yamaha Grizzle 600 all terrain vehicle has an oil capacity of 2.1 quarts. The weight of the oil varies depending on the temperature in which the vehicle is usually operated.
What changes were made in the polaris predator 500 between years 2003 and 2004?
Shorter Wheel Base, Wider Track, Transmission (5 Speed w/No Reverse), Suspension. Overall a better more stable platform. (NOTE: 2005 Predator added reverse.) they dont have 5th gear, if so i cant find mine???
How much oil is in a 2005 Kawasaki 636?
A 2005 Kawasaki Ninja ZX-6R 636cc motorcycle typically holds around 3.6-3.9 quarts of oil when changing the oil and filter. It's always best to consult the owner's manual for the most accurate information regarding oil capacity for your particular model.
How do you mount a regulator on a 1972 harley Davidson ironhead?
To mount a regulator on a 1972 Harley Davidson Ironhead, you will first need to locate the mounting points on the frame or the engine. Once located, use appropriate bolts and nuts to secure the regulator in place. Make sure to connect the wiring harness correctly to ensure proper functioning of the regulator.
In twiligh What type of motorcycle does Edward get but never uses?
Bella Has a Harley Sprint Edward has a Ducati
How do you lower a road star warrior?
To lower a Road Star Warrior, you can consider installing shorter suspension shocks or lowering links to reduce the ride height. Alternatively, adjusting the front fork tubes can also help lower the bike. It's important to ensure that the modifications maintain proper suspension travel and do not compromise the overall handling of the motorcycle.
Where can someone purchase Mens motorcycle jackets?
Well, a very important question that you have asked. Actually, biker jackets are now on trend and both men's and women's are demanding new stylish looking jackets. I am also a big fan of this biker jackets. I think A1 FASHION GOODS will be best store for getting men's biker leather jacket. So you may try this.
How do you use a clutch on a 4 wheeler?
you need to find out where the clutch releases at when you find that. you should give an equal amount of gas as you do let out the clutch it takes practice
How do you open the seat on a 2006 kawasaki ninja 500?
I have same bike,
1. Take of rear seat with key.
2. look inside and you can actually see under the front one.
3. you can see that it has a metal latch holding it there.
4. you need to undo the metal latch, the screw will probably be quite tight but it will come of.
5. once undone, take the screw and metal latch out.
6. you should be able to take seat right out
How do you do an oil change on a 2001 Electra Glide Classic?
To change the oil for a 2001 Electra Glide Classic 2.5 quarts of oil are needed as well as 1 quart primary. The engine oil pan is found underneath the bike on the edge of the transmission pan. A torque wrench will be needed on the plugs.
How do you find the year a Kawasaki motorcycle was made?
Really you can tell it just by looking at the bike. The design changes significantly every year. Find samples of bikes on google image search and compare. I guess there are more elaborate ways of doing it, but this is quite accurate and most importantly, simple.
How do you determine what year model my 4-wheeler is on my suzuki?
4X4's must be titled, right? Your title or registration should tell you the model year.
If not, there should be a VIN or serial number somewhere on the vehicle. With
that in hand, go to the Polaris web site and look for the CONTACT US link. I'm
sure they will be more than happy to help you.
http://www.polarisindustries.com/en-us/Vehicles/Pages/Home.aspx
How do you adjust rear shocks on a 2007 Harley Davidson Street Bob?
The Road King shocks are air adjustable via an air valve located on the right side of the bike just above the rear tire.
Your Harley Davidson owner's manual will tell you what the shocks should be pressurized to depending upon the load on your bike (for instance - if you'll be carrying a passenger - the pressure should be a bit higher than it would be if you were riding solo).
Don't even attempt to read the pressure unless you have the specialized "hand pump" that is used to pressurize the shocks. You can purchase this from Harley Davidson or via a third party online.
The valve is a typical bicycle / auto air valve - but ... DO NOT attempt to pressurize it with anything but the specialized hand pump. Using anything else will risk over pressurization of your shocks and that's not good. The shocks hold a very small volume of air at relatively low pressure levels - so the hand pump is a must have.
Why wont this 1986 Kawasaki Bayou 300 start?
Some possibilities include:
Weak battery and or loose/corroded connections
A faulty starter solenoid
A faulty starter
And hopefully not this, but possibly a locked up engine.
How do you make and ATV street legal in Maryland?
There's no clearcut procedure in Maryland on how to do this, but I have ideas about how this can be done as I'm trying to do the same.
- Firstly, you'll need to pass a vehicle safety inspection before you can register. That means you'll need at least an speedometer, mirrors, turn signals, horn, brake and back up light, DOT approved tires, license plate frame and light, and perhaps an emergancy cut off switch. You'll be inspecting as a motorcycle, so those standards apply. You can call the MVA and ask for specific requirements for a motorcycles (or a custom built motorcycle), then make the appropiate alterations to your quad. There are kits you can buy online for this available.
- Secondly, you're going to need a manufacturers cerfiticate of origin with your quad, which should of come from your dealer.
Now, here's the problem. A "motocycle" by definition in Maryland has this clause: "On not more than 3 wheels in contact with the ground;" Even if you manage to pass inspection, titling a quad as a motorcycle would be difficult. So, here's some ideas:
The other argument you may get is, "it's an offroad vehicle" or "it's an ATV". Well that's not a legal argument. Ask what specifically makes an offroad vehicle or ATV, as such. I'm talking about specific documentation or law. Is there a specific model list of vehicles that are labeled as off road? They may pull up the VIN number of your quad and have it return "off road use", but I'm not sure who controls that information, ask about that too. It may indeed come down to your certificate of origin. It may have "off road use" clearly on it. However, your dealer *can* issue another one. If you've made all the necessary alterations, your dealer and manufacter can reissue a new generic certificate. They don't have to, of course, but if you ask beforehand you may be surprised. If you get your certificate changed, then that argument also goes away, at least it should. The process for converting a motocross bike to a street legal dual sport is a bit more well known, or at least dealt with. Ask the procedure for this. The standard regarding the cerficate of origin (which would also have for "offroad use" on it) in that case should be same as yours. If it isn't, ask why not.
If all else fails, title your quad in a state where quads can be titled as a motorcyle with modifications (Pennsylvania is closest I think, but Arizona is easiest it would appear) and retitle it here. You'd still have to pass inspection to register and get tags, but you'd have a title as documentation when inspectors start laughing at you.
If you get your title and pass inspection, only left to do is get insurance and present it at the time of registration, get your tags, and be off on your way. Of course, if it's titled eventually as a motorcycle, you'll need a motorcycle license to drive it anywhere. Even then, you will get pulled over, constantly. Even if you have everything in order. It's just a fact, and even if your neighborhood police get used to you, people will still call 911 when they drive by you. It's not common in Maryland, so expect the worse of the battle to come after you get your tags.
Tips:
Under no circumstances should you call your quad an "ATV" during any of the process. Call it a four wheeled motorcycle or sport quad specially modified for street use. ATV won't get you very far. Tackle the titling first. If you can get it titled as a motorcyle, you'll have documentation to give to the inspector to treat it as one. I'd attempt to get a title before you make any alterations to your quad. Those can made right before inspection and you can also request a temporay registration good for 30 days, so you may be able to ride around for 30 days! Also, titling requires a "simple" stop at the MVA. You may simply get lucky and get someone who is willing to work with you and title your quad as a custom motorcycle without hassle. I'd try that first before you go further than you have too. Also remember, be assertive and ask for specific documentation or law for any rational they give for rejecting you.
http://www.marylandmva.com/AboutMVA/INFO/27300/27300-31T.htm
http://www.marylandmva.com/AboutMVA/INFO/58000ASE/58000-01T.htm
http://www.marylandmva.com/AboutMVA/FAQ/default.htm#motorcycle_definition
How can you make a stock ATV pipe louder?
Making a motorcycle exhaust louder can be achieved by removing the baffle in the muffler, or shortening the length of the muffler. If applicable you can also change to a high volume end cap.
Note that several countries have regulations regarding noise levels from vehicles. Remember to check with your local road vehicle authority to make sure you will not be fined.
How do you adjust carb on 50cc moped?
there should be 2 screws on the carb one with a spring which is the idle screw turn it all the way in and start by screwing it out 2 and 1/2 spins the other screw is your fuel screw start 1 and 1/2 screws out play with them you will figure it out quite fast
How can you remove the muffler baffles in a Suzuki 1998 VS 800 Intruder?
I have a 04 v-star classic which i have removed the baffels from. I took a hole saw and cut around the small pipe, then welded a bar to the small center pipe and moved it back and forth until the two small welds that hold the pipe in place broke, also if you just want it a little louder you can start by drilling holes around the small center pipe.