Nissan Trucks and SUVs

On a 1991 Nissan truck, the starter is located on the passenger side of the engine, near the bottom, attached to the transmission. To change it, first disconnect the negative battery terminal to prevent electrical shock. Then, remove the starter’s mounting bolts and electrical connections, and replace it with the new starter by reversing the process—ensuring all connections are secure before reconnecting the battery.

To replace the alternator on a 1996 Nissan KingCab pickup 4WD, first disconnect the negative battery terminal to prevent electrical shorts. Remove the drive belt by loosening the tensioner, then detach the electrical connectors and mounting bolts from the alternator. Install the new alternator by reversing the removal process, ensuring all connections are secure, and finally, reattach the drive belt and reconnect the battery. Always consult the vehicle's service manual for specific torque specifications and additional details.

For a 2007 Nissan Qashqai 1.5 diesel engine, it is recommended to use low ash diesel engine oil that meets the specifications of ACEA C3 or API SN. A viscosity grade of 5W-30 is commonly suitable, but you should always check the owner’s manual for the specific oil requirements. It's important to use oil that complies with the manufacturer's recommendations to ensure optimal engine performance and longevity.

Yes, 32x11.5x15 tires can fit on a 15x7 rim, as the 7-inch width falls within the acceptable range for tires of that size. Typically, a 32x11.5 tire is compatible with rim widths from about 7 to 9 inches. However, it's essential to ensure that your vehicle has sufficient clearance for the larger tires to avoid rubbing against the fenders or suspension components. Always consult your vehicle's specifications and consider any modifications needed for the best fit.

On a 1987 Nissan D21, the flasher relay is typically located under the dashboard, near the steering column or fuse box. You may need to remove a panel to access it. The relay is usually a small cylindrical component that clicks when the turn signals or hazard lights are activated. If you're having trouble locating it, consulting the vehicle's service manual can provide specific guidance.

To remove the starter from a 1995 Nissan 2WD pickup truck, first disconnect the negative battery terminal to ensure safety. Then, locate the starter, which is typically mounted on the lower side of the engine near the transmission. Remove the electrical connections from the starter, usually consisting of a power cable and a smaller signal wire. Finally, unbolt the starter from its mounting bracket and carefully pull it out.

The gas tank in the 2015 Nissan Pathfinder has a capacity of approximately 19.5 gallons. This allows for a reasonable driving range, depending on fuel efficiency and driving conditions.

To set the timing on a 1997 Nissan pickup, first, ensure the engine is at operating temperature and then turn off the engine. Next, locate the timing mark on the crankshaft pulley and the timing scale on the engine. Use a timing light to check the timing by connecting it to the number one cylinder spark plug wire and aiming it at the timing marks while the engine is running. Adjust the distributor as needed to align the timing mark with the specified timing value found in the vehicle's service manual.

On a 1990 Nissan D21 truck, the air conditioning relay is typically located in the engine compartment, near the fuse box. It can often be found mounted on the firewall or near the battery. You may also refer to the vehicle's service manual for a specific diagram and location details. If you're having trouble locating it, checking the relay itself for a label can also help.

You can find a vacuum hose routing diagram for a 1986 Dodge Ram with a 318 by checking the vehicle's service manual, which often includes diagrams and specifications. Additionally, online forums dedicated to classic Dodge trucks or websites like AllDataDIY may have the information you need. You can also look for resources on automotive repair websites or YouTube, where enthusiasts often share diagrams and tutorials. Lastly, contacting a Dodge dealer or a vintage car parts supplier might yield helpful resources.

If you're experiencing issues with the shifter on a 2009 Nissan Titan, start by checking the brake light switch, as it must be engaged for the shifter to move out of park. Inspect the shifter assembly for any signs of damage or wear, and ensure the transmission fluid level is adequate. Additionally, verify that the shift cable is properly connected and not frayed. If problems persist, it may be necessary to consult a professional mechanic for a thorough diagnosis.

On the 1997 four-cylinder Nissan pickup engine, the air intake sensor, commonly known as the mass air flow (MAF) sensor, is typically located between the air filter housing and the throttle body. It is mounted in the intake duct, where it measures the amount of air entering the engine. Make sure to check the specific model and engine configuration, as the exact placement can vary slightly. Always refer to the vehicle's service manual for detailed information.

A fuel temperature sensor for a 1995 Nissan pickup typically resembles a small cylindrical component with electrical connectors on one end. It is often made of metal or plastic and may have a threaded portion for mounting into the fuel system. The sensor may have a simple design, featuring a single wire or a connector with multiple pins, depending on the specific model and engine configuration. It's usually located near the fuel rail or fuel injectors to accurately measure the fuel temperature.

On a 1995 Nissan pickup, the fuel temperature sensor is typically located on or near the fuel rail or fuel injectors. It may also be mounted on the engine block or near the fuel pump, depending on the specific engine configuration. To locate it precisely, refer to the vehicle's service manual for diagrams and exact specifications.

For a 1997 Nissan pickup, the recommended manual transmission fluid is typically GL-4 or GL-5 gear oil with a viscosity of 75W-90. It's important to check your owner's manual for specific recommendations, as some models may have unique requirements. Ensure that the fluid meets the manufacturer's specifications for optimal performance and longevity.

To remove the rear lens cover on a Nissan Qashqai, start by locating the securing screws or clips around the lens assembly. Use a suitable screwdriver or tool to remove these fasteners carefully. Once unscrewed, gently pry the lens cover away from the assembly, being cautious not to damage the surrounding trim or wiring. If necessary, consult the vehicle's manual for specific instructions related to your model year.

On a 1988 Nissan Pickup, the starter relay is typically located in the engine compartment, near the battery. It is often mounted on the inner fender or near the fuse box. To access it, you may need to remove the cover for the fuse box or look for a small rectangular relay that is labeled accordingly. Always consult the vehicle's service manual for specific details and diagrams.

A 1997 Nissan pickup typically holds about 2.5 to 3.0 pounds of R-134a refrigerant for its air conditioning system. However, it's essential to check the owner's manual or a service manual for the exact specifications, as the amount can vary based on the specific model and configuration. Always ensure the system is properly evacuated and charged with the correct amount of refrigerant for optimal performance.

The vacuum hose routing diagram for a 1987 Nissan pickup with a 2.4L engine typically includes connections for the intake manifold, brake booster, and various emissions control components, like the EGR valve and canister. The hoses generally run from the intake manifold to the brake booster, with additional hoses branching off to the EGR and other vacuum-operated devices. For the exact routing, it's best to consult the vehicle's service manual or a specific diagram, as variations can exist depending on the particular model and emissions requirements.

The correct spark plug gap for a 1995 Nissan pickup typically ranges from 0.040 to 0.044 inches (1.0 to 1.1 mm). It's always best to consult the owner's manual or a repair guide for your specific engine model to confirm the exact specification. Proper gap ensures optimal engine performance and efficiency.

The firing order for a Nissan Micra K12, which typically features a 1.2-liter or 1.5-liter engine, is 1-3-4-2. This sequence is standard for many four-cylinder engines, ensuring smooth operation and balance. Always consult the vehicle's service manual for specific details related to your engine variant.

Well, honey, the head bolt torque for a Nissan TD27 is typically around 90-94 ft-lbs. But let me tell you, make sure to double-check your specific model and year because I ain't taking the blame if you mess it up. And for the love of all things sparkly, use a torque wrench and follow the proper tightening sequence - don't go all Hulk on those bolts!

Ah, the firing order for a B12 Nissan Sunny '89 is 1-3-4-2. Just like painting a happy little tree, it's important to follow the right sequence to keep things running smoothly. Remember, mistakes are just happy accidents waiting to be fixed.

To remove the rear view mirror in a 2006 Nissan truck, you typically need to loosen the set screw located inside the tiny hole at the bottom. If inserting a screwdriver isn't working, you may need to try using a different tool such as an Allen key or contact a professional to assist you. Be sure to exercise caution and avoid using excessive force to prevent damage.

If your Nissan pickup truck's engine is running at high RPM or revving high, it could be due to issues like a faulty throttle position sensor, a vacuum leak, a dirty air filter, or a malfunctioning idle control valve. It is recommended to have a mechanic inspect and diagnose the problem to determine the exact cause and necessary repairs.