Why might someone need to remove and then reinstall the driver for his or her sound card?
to make sure the sound works or to install a new one..
Why doesn't my diablo 2 have sound?
it does it has lots of awsome sound effects there might be something wrong with your computer or the sound might be turned of in your options screen
What is the difference between TRS and TRRS connector?
In a simple enough Answer the biggest, main idea difference between TRS and TRRS is the microphone. Usually TRRS will have a microphone and thus will have an extra ring around the bottom. Old Ipod headphones will have just the two white bands dividing the jack into three metal peices. These are TRS. iPhone headphones with the mic will have three white bands separating the jack into four metal pieces. this is TRRS
I would have the brakes checked ASAP. As to the rattle there maybe a nut that came off something and is inside something and the bump makes it move. The two may not be related.
Whats theNumber of card slots on a motherboard?
Depends what motherboard you get. Some have one, and some have 6. Really depends
What virus that disable sound card?
it is not a virus you just have to redownload a software update for the sound card to work again
Why doesn't after market radio work in 2001 town and country no sound coming out why?
Some cars are equipt. with a factory amp. , so your speaker wires are not connected to the actual radio speaker outputs. My suggestion is go to autozone,wal-mart,etc. and get what they call a factory wiring harness adaptor to install aftermarket radio/cd player and do not have to splice or cut car electrical wiing. Doing so can cause electrical shorts,or dash lights not to work,turn signals ,etc.
It stands for Sony Phillips Digital Interface. It was developed by Sony and Phillips
How do you overcome the IRQ conflict with sound card?
You need to identify which device the sound card is conflicting with and then find out if you can change the IRQ on one of the devices. If you cannot change the IRQ for one of them, such as via a dip switch or jumper, then you will have to remove one of the devices.
What is the most probable cause of a sound card and a printer working intermittently?
a changed printer cable
Why does putting your ear to the door help us hear better?
It helps you to hear better because if you put your ear at the door the sound vibrates so that's why you can hear better.
If this is the wrong answer then
don't shout t me because I'm only
in standard 4
By: Boago Keetshabe
How do you download 45r7727 sound driver?
In order to download the sound driver for a 45r7727, access to the manufacturers website is needed. That is generally not a problem. It is never a good idea to download drivers from a third party website.
Download driver sound creative EMU10K1-JFF?
The model number you have stated is the main chip on the card, not the model of the sound card. This card is a Creative card. Go to Creative's website to get the drivers.
A flexijack allows you to connect many different things with one input. It is frequently found on sound cards.
Sound card not detected and other pci-e slot not working?
If your sound card is not detected and other PCIe slots are not functioning, it could indicate a few potential issues. First, ensure that all connections are secure and that the sound card is properly seated in the PCIe slot. Next, check the motherboard for any physical damage or dust that might be interfering with the connections. If the problem persists, consider updating your BIOS and drivers, or testing the sound card in a different system to rule out hardware failure.
How do you set up a phantom power supply for a condenser microphone?
To set up a phantom power supply for a condenser microphone, first ensure that the microphone is compatible with phantom power (typically 48V). Connect the microphone to the input of the phantom power supply using an XLR cable. Then, connect the output of the phantom power supply to your audio interface or mixer, also using an XLR cable. Finally, turn on the phantom power on the supply to provide the necessary voltage for the microphone to operate.