Acura TL and TLX

The engine code number 1457 on a 2002 Acura typically refers to a specific diagnostic trouble code (DTC) related to the vehicle's engine or emissions system. To accurately diagnose the issue, it's essential to use an OBD-II scanner to retrieve the complete code description and any related codes. This information can help identify the underlying problem, whether it's related to sensors, fuel delivery, or emissions components. Always consult a qualified mechanic for proper diagnosis and repair.

The 2012 Acura TL typically requires about 4.5 quarts (or approximately 4.3 liters) of oil when using an oil filter change. It's important to check the owner's manual for the specific engine type, as the 3.5L V6 and 3.7L V6 engines may have slightly different capacities. Always ensure to use the recommended oil type for optimal performance.

In a 1997 Acura 3.2 TL, the fuel pump relay is located in the under-hood fuse and relay box. This box is typically found near the driver's side of the engine compartment. To access the relay, you may need to remove the cover of the fuse box and refer to the diagram on the inside of the cover for the exact location of the fuel pump relay.

The fuse box in a 2001 Acura TL is located under the dashboard on the driver's side. To access it, look for a cover panel beneath the steering wheel; it may require removal of a plastic cover. Additionally, there is another fuse box located in the engine compartment near the battery. Always refer to the owner's manual for specific fuse locations and functions.

On a 2000 Acura TL, the flasher relay is typically located under the dashboard, near the driver's side. Specifically, it can often be found in the fuse box, which is situated to the left of the steering column. To access it, you may need to remove a cover panel or refer to the owner's manual for detailed instructions.

To reset the VSA (Vehicle Stability Assist) light on a 2010 Acura TL, first ensure that the vehicle is turned off. Then, turn the ignition to the "On" position without starting the engine. Press and hold the VSA button (located near the dashboard) until the VSA light turns off, which typically takes about five seconds. Finally, start the engine to confirm that the light stays off. If it reappears, it may indicate an underlying issue that needs to be addressed.

The cost to replace the engine mounts on a 2005 Acura TL typically ranges from $500 to $800, including parts and labor. Parts alone can cost between $100 and $300, depending on whether you choose OEM or aftermarket options. Labor costs usually range from $400 to $600, depending on the shop's hourly rate and the complexity of the job. It's advisable to get quotes from multiple mechanics for the best price.

The P1457 code in a 1999 Acura TL indicates a problem with the evaporative emission control system, often related to a leak or a malfunctioning component. To troubleshoot, start by visually inspecting the EVAP system for any cracked hoses or loose connections. Next, check the gas cap to ensure it’s tightly sealed and not damaged. If necessary, perform a smoke test to identify leaks, and consider testing the EVAP purge and vent valves for proper operation.

To reset the immobilizer on a 1999 Acura TL, first, ensure that you have the correct key. Insert the key into the ignition and turn it to the "On" position without starting the engine. Leave it in this position for about 10 minutes until the security light on the dashboard stops blinking and remains on, then turn the key to the "Off" position. After that, turn the key back to "On" and start the engine; the immobilizer should be reset.

In a 2000 Acura 3.2TL, the turn signal flasher is typically located under the dashboard, near the steering column. It can be found in the fuse box, which is usually positioned on the driver’s side, to the left of the steering wheel. You may need to remove a cover or panel to access it. Always consult the owner's manual for specific details and diagrams.

The emergency light flasher on a 1999 Acura TL is typically located on the center console, near the climate control and audio controls. It is usually marked with a red triangle symbol. You can activate it by pressing the button down, which will turn on the hazard lights. If you're having trouble finding it, refer to your vehicle's owner manual for a visual reference.

To replace the alternator in a 2001 Acura 3.2TL, first disconnect the negative battery terminal to ensure safety. Remove any components obstructing access to the alternator, such as the air intake duct and brackets. Then, disconnect the electrical connections and loosen the serpentine belt by adjusting the tensioner. Finally, remove the bolts securing the alternator, replace it with the new unit, and reassemble everything in reverse order.

The oil sending unit on a 1997 Acura TL is typically located on the engine block, near the oil filter. It is usually situated on the driver's side, toward the rear of the engine. To access it, you may need to remove some components or use a socket wrench, as space can be tight. Always consult a repair manual for specific details and diagrams for your vehicle.

The output speed sensor on a 2006 Acura TL is located on the transmission. Specifically, it is mounted on the driver's side of the transmission case, typically near the output shaft. To access it, you may need to lift the vehicle and remove any necessary components for better visibility and access. Always consult the vehicle's service manual for precise instructions and safety precautions.

As of 2023, there are approximately 280 Acura dealerships in the United States. This number can fluctuate slightly due to changes in dealership ownership or new openings. Acura, as a luxury division of Honda, focuses on providing premium vehicles and services across its dealership network.

Acura TL rotors typically last between 30,000 to 70,000 miles, depending on driving habits, road conditions, and maintenance practices. Regular inspections and proper maintenance can extend their lifespan. If you notice vibrations, noise, or uneven braking, it's essential to check the rotors sooner, as these may indicate wear or damage. Always consult your vehicle's manual for specific recommendations.

In a 1997 Acura TL 3.2, the power steering pump is located on the front of the engine, typically mounted on the driver’s side. It is driven by a belt connected to the crankshaft. To access it, you may need to remove any covers or components that obstruct the view. Always ensure the engine is off and cool before attempting to work on it.

The cost to replace the timing belt on an Acura 3.2 TL typically ranges from $500 to $1,000, depending on the location and whether additional components, like the water pump, are replaced simultaneously. Labor costs can vary significantly based on the mechanic's rates and the time required for the job. It's advisable to get quotes from multiple shops to find the best price. Regular maintenance is crucial, as failing to replace the timing belt can lead to severe engine damage.

To fix a loose rearview mirror on a 2005 Acura TL, first, locate the set screw on the back of the mirror. Use a small Allen wrench or screwdriver (depending on the screw type) to tighten the screw gently until the mirror feels secure. If the mirror is still loose or the mounting bracket is damaged, consider replacing the bracket or using adhesive mirror glue for a more permanent fix. Finally, ensure the mirror is positioned correctly before driving.

Service code A135 on an Acura TL indicates a maintenance service that includes an oil change, tire rotation, and replacement of the engine air filter and cabin air filter. The "A" signifies the oil change, while "1" refers to the air filter replacements, and "3" suggests that the tires should be rotated. This code typically appears as part of the vehicle's maintenance reminder system, prompting necessary service to keep the car running smoothly.

To change the side marker bulb on a 2004 Acura TL, first, locate the side marker assembly on the fender. Use a flathead screwdriver to gently pry out the assembly from its housing. Once removed, twist the bulb socket counterclockwise to release it, then pull out the old bulb and replace it with a new one. Finally, reinsert the bulb socket, twist it to secure, and snap the side marker assembly back into place.

On a 2006 Acura TL, the map sensor is located on the intake manifold, typically near the throttle body. It is a small, rectangular component with an electrical connector. To access it, you may need to remove some engine covers or components for better visibility. Always ensure the engine is off and cool before attempting to locate or work on the sensor.

A 20x9 wheel can fit an Acura TL, but the suitability depends on the specific model year and suspension setup. The 37-inch backspacing seems unusually high, as standard backspacing for this type of wheel is typically around 5-8 inches. It's crucial to check the overall offset and ensure there is enough clearance for brakes, suspension components, and fender wells. Always consult with a professional or refer to fitment guides for your specific vehicle before making any modifications.

A P0497 error code on an 08 Acura TL indicates a fault with the evaporative emission control system, specifically related to the purge valve. This code typically arises from issues such as a faulty purge valve, a vacuum leak in the EVAP system, or a malfunctioning engine control module (ECM). It's essential to inspect the purge valve and associated hoses for proper operation and leaks. Addressing these issues helps ensure the vehicle's emissions system functions correctly.

The code E01 on the stock CD player of a 1996 Acura RL typically indicates a problem with the CD mechanism, often related to a disc loading or reading error. This may occur due to a dirty or damaged CD, a malfunctioning laser, or issues with the player’s internal components. To resolve the issue, you can try cleaning the CD and the player, or if the problem persists, professional repair may be needed.