0
Chevy Corvette
Launched in 1953, Chevy Corvette is a sports car manufactured by General Motor’s Chevrolet division. Harley Earl designed its first model, a convertible. It is Commonwealth of Kentucky’s official sports car.
4,587 Questions
Where is the fuel pump relay on 1982 corvette?
in the battery box behind the computer , hidden behind mounting plate.
How do you open the hood on a 1987 Chevy Corvette if the latch release cable is broken?
Auto enthusiast husband says can't be done at home. Mechanic needs it on the lift to find the break on the cable
They make a special tool you can buy from a classic corvette shop. Comes with directions. They run between 20 and 40 $.1969 Corvette correct tire size on 8x15 Corvette rally rims?
The correct tire size is a F70x15, but in todays metric tire sizes I think the 235/70-15 is a perfect fit.
How much horsepower does a stock 2001 corvette have?
350HP for the base models and 385HP for the Z06.
to protect a computer or network from unauthorized access
Where do you find Corvette parts?
Best prices and quality - Zip Corvette http://www.zip-corvette.com 1-800-962-9632
http://www.willcoxcorvette.com 800-588-3883. Main Distributors http://www.corvetteamerica.com/ (corvette America) http://www.corvettecentral.com/ (Corvette Central) http://www.ecklers.com/ (Ecklers) http://www.zip-corvette.com (Zips) http://keenparts.com/pages/catalog1.php ( Keen Auto Parts) http://www.corvette-paragon.com/ (Paragon Reproductions) http://www.madvet.com/ (Mid America Motor Works)
How do you replace the running lights on a 1999 corvette?
I just did it to mine. First, get the front of the car in the air on jack stands. Next, take off the tire on side you need to change. Then there is a place plastic about 14 by 6 or so, on the bottom of the car that is under the brake ducting. Take that off, it has either four or five 10mm head screws. Now you can reach in there to get to the light. There is a tab you have to push in before you can turn the light socket out. Once you do that your home free. Pull the bulb out of the socket and put a new in. Now the fun part, putting it back togather and getting everything to line up :)
How do you remove taillight assembly on a 2002 Dodge 2500?
Should be able to put down the tail gate and get to the screws that hold the lights on.
There is a good possinilty that the battery is dead. I believe you have to replace the complete unit and they are costly.........around $150 each OEM
Why would the heater blow hot air all the time on my 79 Corvette?
There is a valve which controls the flow of coolant to the heater core, which is a small radiator located inside the passenger compartment. If this valve is open, hot coolant will be pumped into the heater core, which will get hot and warm the air passing over it. If the lever or temperature selector in your vehicle does not control that valve, then the cable is broken, or the electrical control device is not working.
Why would the parking and interior lights stay on in a 1984 corvette?
The only thing in common between the parking and interior lights is that the switches for each are located on the Main Light Switch. The parking lights will come on if the switch is pulled out to either the first or second stop. (The second stop also being the headlamps ON position). The interior lamps are turned on when the Main Light Switch is turned fully counter-clockwise. It is possible that the switch is defective but it seems unlikely that a defective switch could cause both of these problems. The interior lights are also controlled by the Interior Lamp Delay Timerwhich is controlled by the Door Jamb Switches. These timer modules are prone to failure and can cause the interior lights to remain on at all times. Un-plugging the module is the best way to find out if it is defective or not. It is located on the Instrument Panel Wiring Harness which is accessable by removing the lower instrument panel just above the passenger's knees (the panel with the light) and reaching up with one hand to find the harness. It is a small black plastic box taped to the harness. Break the tape with your fingers and you can lower the box down just enough to unplug it. It will have a 5-pin connector with (1) black, (3) white, (1) pink/black & (1) pink/white wire. If you find the timer module to be the problem, you can connect all three of the white wires together and you will have working interior lights when you open the doors. However, the lights will shut off immediately when you close the doors but you will have lights and they won't be on at all times.
Where can you find a fuse diagram for 1982 corvette?
Did you find an answer? If not email me and I'll send you a diagram.
What is the email address? email me at rgmccard@att.net Thanks
Bob
How many Corvettes were built for the 2003 model year?
35,469 total units.
See the following link....http://www.web-cars.com/corvette/options.php?optionyear=2003
How do you open the hood on a 1985 Corvette?
you have to trip the upper latch clip do do this you need a l bend rod to push under the hood and push the clip to rhe out side edge of the fender to pop the latch
What does code P0410 mean on a 2001 corvette?
Insufficient EGR Flow:
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms. A code P0401 most likely means one or more of the following has happened: * The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced * There is a blockage in the EGR (tube), most likely carbon buildup * The EGR valve is faulty * The EGR valve may not be opening due to a lack of vaccuum In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit. * Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open * Clean out the EGR valve and/or tubing to remove deposits * Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model) * Replace the DPFE sensor (with a good quality / OEM one) * Replace the EGR valve
Insufficient EGR Flow:
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms. A code P0401 most likely means one or more of the following has happened: * The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced * There is a blockage in the EGR (tube), most likely carbon buildup * The EGR valve is faulty * The EGR valve may not be opening due to a lack of vaccuum In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit. * Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open * Clean out the EGR valve and/or tubing to remove deposits * Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model) * Replace the DPFE sensor (with a good quality / OEM one) * Replace the EGR valve
Where is jack for 1981 Corvette?
It's in the compartment behind the passenger seat. Lift out the box and it should be there.
How can you open the hatchback of your 1987 Corvette when the controls on each door do not function?
i have a 85 and it has a 3rd switch in the glove box
Where is the computer on a 1989 Corvette?
I think this is still the earlier L98 engine and not the more recent LT1 engine. If that is the case, the computer is above passenger knees, behind the bulky passenger side dash panel. On LT1, computer has been moved into engine compartment, above brake booster.
How hot does it get in Indiana?
Because the state of Indiana is known for its hot and humid climate, it can get to be 100 degrees and more during the summer months. However, in the winter months, it can be well below freezing.
Why does the cooling fan run all the time on my 1989 Corvette?
The fan sensor is bad or the fan relay is stuck. Swapping out the relay is the most likely fix.
Where is the fuel filter or filters located for a 1991 Corvette ZR1?
under passengers, feet inside r frame rail,, behind and inner r/front wheel
