0
Chevy Corvette
Launched in 1953, Chevy Corvette is a sports car manufactured by General Motor’s Chevrolet division. Harley Earl designed its first model, a convertible. It is Commonwealth of Kentucky’s official sports car.
4,587 Questions
Where can you find a free wiring diagram for a 1980 corvette?
Most Chevrolet dealers will give you a free 1980 Chevy Corvette wiring diagram. The wiring diagram can be found in Chevrolet service manuals at your local library.
How do you open the hood on your 97 cavalier?
By pulling the hood release lever. This type information can be easily found in your owner's manual. If you do not have one, I suggest you get one. Dealer can order you one or you may find one at a salvage yard. Also search on line for a down loadable copy. Some manufactures do have these on line. do a GOOGLE search , if you don't have the google search engine on your homepage or address bar browser then go to google.com and search WEB for 1997 Chevrolet Cavalier Owner's Manual also try these sites: ebay.com carownermanual.com autorepairmanuals.biz Books4Cars.com www.themotorbookstore.com/cavalier-repair-manual.html - 24k
Can you put a 1985 corvette tail lights on a 1992 corvette zr1 will it directly fit on?
No the early C4 lights are round and the 92 has the ZR1 oval lense.
Is a lt1 350 the same as a 1976 350 block?
The block, itself, for the LT-1 in 70, was nothing special, other than a 4 bolt main cap. Now, the serial numbers, and casting date will be different, and will eliminate any "numbers matching" type of thing, but, other than that, if the 76 is a four bolt main, then yeah, they are the same.
How to open hood on 2001 Toyota Camry?
open the screws on both the sides . then lift it up . To open the hood, look for a little lever on the left side under the steering. pull that lever, then go to the front of the car and slide your hand under the hood and disengage the lever under the hood then lift it up.
Why would your front wheel lock up?
Probably a frozen brake caliper...Possibly a bad weel bearing but i dont think it could stop the wheel completely.
Where is the horn relay located on a 1989 Oldsmobile Ninety-Eight?
under kick panel on passenger side
How do you change the Third Brake light Bulb in a 1987 Chevrolet Corvette Coupe?
You will love this. Raise the rear glass. Under the metal hinge area you will see two torx screws. Remove them and hold on to the lamp assembly. Hold the lamp in one hand and close the hatch. Now there are two screws that hold the lamp and cover together. With the metal cover removed and set in a safe place step on the brake pedal and notice which lamp is out. These are tiny bulbs with pins that have to be lined up with two small holes in the bulb housing. Once you find replacement bulbs DO NOT TOUCH THEM WITH YOUR FINGERS. I use the plastic bag to hold them while I find the holes they go in. There is one thing you might try before you do any of this. Have someone hold the brake pedal down while you slap the top of the lamp housing. Sometimes a little corrosion causes a slight problem. It has worked for me.
== ==
What year was the first fiberglass Corvette?
The first fiberglass Corvette was produced in 1953. This iconic car marked the debut of the Chevrolet Corvette, which became famous for its lightweight and innovative fiberglass body. The initial production run consisted of just 300 units, making it a significant piece of automotive history.
Where is the oil pressure sender in a 1980 Chevrolet Corvette?
at the top rear of the engine, behind distributer
Procedure for opening convertible top on 1992 corvette?
Well, when I open mine I do the following:
1. I pull the top rear latch located behind the drivers seat. It's a small plastic handle that pulls toward the front of the car.
2. I then raise the rear of the top to reach the cowl unlock button also behind the drivers seat. It's bright yellow. There is also a button in the glove box middle, and one on each door in my car.
3. I then raise the cowl upright in the air and leave it raised. I release the rear of the top that I have been holding.
4. I then sit down in the drivers seat and release the top latches on both sides of the windshield.
5. I then step out of the car and raise the front of the top folding it into the cowl opening.
6. Once the top is inside I lay small towels over each side of the frame to prevent any rattling noise and close the cowl.
7. I also wax the cowl cover more that the rest of the car to protect it.
Trace then pretend it's all your own work
...
I disagree with the answer above. what you really should try is mimicking your favorite artist. Get a feel for his/her art. The more you practice, the better you will get. Soon after, you will be able to start making your own, unique style of art.
Where is the auxiliary fuse panel located on a 1992 Corvette?
On the passenger side under that panel that's right below the glove box the panel cover is located where you see the passenger courtesy light (all the way down, underneath)
pull back the Velcros attached carpet, remove 2 screws, drop the panel door down, now take a flash light and look way up towards the back you will see the second fuse box (Blue). .controls the power door locks and the alarm.
The layout for the fuse panel for a 1991 corvette?
which one do you want to know the one in the dash on passenger side or the one under the knee bolster
