Computer Hardware

what are the running costs for a PC monitor on standby

yes you can but the frame rate is so low you wouldn't bother playing it better you upgrade it to 9600gt which is a good overall performer

Contact Simply Barcodes at 1-877-768-4977 (toll-free). I have no affiliation with this company. I've been personally doing some research in order to learn more about UPC codes. They offer competitive prices and do not require any membership, renewals, etc. View their Web site for more details: http://www.barcode-barcode.info/?engine=Yahoo!111&keyword=obtain+barcode

There are many other companies which resell UPC barcodes. Go to http://www.singleupc.com/resellermatrix.htm for a comparison of each company.

Always make sure you can speak to a real person.

you need ten quarters

metal kitchen foil

blotting paper

two pieces of copper wire

cider vinegar

salt

bowl

LED- light emitting diode

&masking tape

1.Mix vinegar and a little salt together in the bowl. Vinegar is acetic acid and all acid can be used as an electrolyte.common salt is sodium chloride,a combination of a positive and negative ion (Na+ and Cl-). These will separate in the electrolyte, increasing it's strength.

2. Soak your circles of blotting paper in the ion-rich electrolyte.

3. With the masking tape, attach the end of one wire to the underneath of a foil disk. This is the negative terminal.Now stack in this sequence-foil,paper,coin,foil,paper,coin.

Each combination is it's own tiny battery-but light an LED you'll need quite a few of these cell's

4. When you have a stack,you can attach a wire to the last coin with tape. This will be the positive terminal.

true

I don't know about fivewire ports but if you mean FireWire: FireWire ports are used by many video cameras and are commonly seen on Macintosh computers, however they are also seen on PCs.

They can support multiple higher-layer protocols, and Ethernet 802.3 frames cannot.

Time of CPU usage per minute,

Number of processes running at once

If you have a dedicated graphics card slot on your motherboard (the circuit board as other peeps call it) you can insert your discrete video card in (there are many videos on how to install video cards into AGP or PCI slots) and then install the drivers either from the internet or the ones that came with the box. Finally, hook up your monitor onto whatever port you use and your computer should identify it as a graphics card.

Depending on the Hardware, System software, and BIOS, you may be able to install the new video card and it will be automatically used instead of the integrated version. If it is not recognized, there may be a BIOS setting to disable the integrated video hardware, or there may be a switch or jumper setting on the motherboard to accomplish this. There is even a possibility that both will be usable concurrently each with its own monitor.

ya i have but it is very small

2.0 GB

It has two slots Each can Hold 1.0 GB of RAM type DDR266 PC2100, 184p DIMM

Put images or other documents onto your computer either to edit or email to someone else.

Make sure the printer is turned on and the drum LED is blinking. Open the front cover. Slowly pull the drum unit and toner cartridge assembly out of the machine. Push down the green lock and take the cartridge out of the drum unit.

You need to change your BIOS boot settings to boot from CD/DVD not floppy.

I don't think it would hurt. I changed the refresh rate of my laptop's LCD from 59 to 60 a month ago and its been working fine since. As long as 60 Hz is already shown as an option in your control panel or whatever, it should be OK.

SKU is stock keeping unit. Every product is given a unit in which it is accounted. In case of distance, we say some distance as meter, KM and so on. Similarly say for example in case of chairs, they say 10 chairs makes 1 TPN or ABC which is the stock keeping unit for chairs. If they say they have 10 ABC which means 100 chairs available.

One Sector on storage media constitutes of 512 Bytes.

Go to my computer.

Highlight the drive you want to share.

Right click, and go to sharing and security.

If it doesnt take you straight away, go to the sharing tab.

Then on the networking part of this, click on the share this folder on the network. And if you want to be able to change any of the files, then click allow other users.

If its the first time, you share a drive, it will say, that it needs your permission etc.

Switches are data link layer devices that, like bridges, enable multiple physical LAN segments to be interconnected into a single larger network. Similar to bridges, switches forward and flood traffic based on MAC addresses. Any network device will create some latency. Switches can use different forwarding techniques-two of these are store-and-forward switching and cut-through switching. In store-and-forward switching, an entire frame must be received before it is forwarded. This means that the latency through the switch is relative to the frame size-the larger the frame size, the longer the delay through the switch. Cut-through switching allows the switch to begin forwarding the frame when enough of the frame is received to make a forwarding decision. This reduces the latency through the switch. Store-and-forward switching gives the switch the opportunity to evaluate the frame for errors before forwarding it. This capability to not forward frames containing errors is one of the advantages of switches over hubs. Cut-through switching does not offer this advantage, so the switch might forward frames containing errors. Many types of switches exist, including ATM switches, LAN switches, and various types of WAN switches. Asynchronous Transfer Mode (ATM) switches provide high-speed switching and scalable bandwidths in the workgroup, the enterprise network backbone, and the wide area. ATM switches support voice, video, and data applications, and are designed to switch fixed-size information units called cells, which are used in ATM communications. Figure 4-3 illustrates an enterprise network comprised of multiple LANs interconnected across an ATM backbone. Figure 4-3 Multi-LAN Networks Can Use an ATM-Based Backbone When Switching Cells

LAN switches are used to interconnect multiple LAN segments. LAN switching provides dedicated, collision-free communication between network devices, with support for multiple simultaneous conversations. LAN switches are designed to switch data frames at high speeds. Figure 4-4 illustrates a simple network in which a LAN switch interconnects a 10-Mbps and a 100-Mbps Ethernet LAN. Figure 4-4 A LAN Switch Can Link 10-Mbps and 100-Mbps Ethernet Segments

there is no figures as noted above

Power on self test in electronics equipment or computers is done to validate if all the critical parts of the device are working as desired when it is turned on. Any thing wrong internally or on an interface is typically reported as a failure on power on self test. What all is tested depends on how elaborately the power on self test has been designed.

- Neeraj Sharma

Check with the motherboard processor compatibility sheet of the motherboard you have first. A BIOS update may be needed for your current motherboard.

You can't get online without the internet. You can get free Wi-Fi at locations such as hotels and restaurants, you can also go the the library. Many ISPs also offer free dial-up.

I had this problem too. And out of desperation, I went up to the apple icon in left hand corner scrolled down to "force quit" clicked on that and it pulled up a box with the Jaksta icon in it. I hightlighted it and then clicked on "force quit" and it was gone from my desktop. Hope that helps.

You can upgrade the PSU or power supply unit on most computers to improve its ability to support more hardware. This can include better video cards, more hard drives, or additional cooling fans.

Capacitors are generally used in high powered automotive sound applications. The capacitor acts as a storage for power. When peak parts of a music program are played and extra power is needed to drive the amplifier and speaker, the power is drawn from the capacitor. This puts less strain on the car's battery and alternator.