Computer Networking

Cost - UTP cabling is cheap, whereas Fibre is expensive

Ease of installation - Fibre requires specialist installation to run the cable and terminate the ends. UTP cables are much easier to handle. It may be impractical to run cables of any description leaving wireless as the only option.

Security - data packets traveling over wireless can be intercepted very easily. UTP is more secure, but susceptible to EMI. Fibre is the most secure.

Distance - long distances can be best handles by fibre

Bandwidth - your expected usage requirements may exclude a particular medium.

it doesnt have an inverse since only square matrices have an inverse

A straight cable is used to connect a PC to a hub, switch, or router.

Your Ethernet cable should have an RJ-45 modular connector on each end of the cable. Connect one plug in the RJ-45 slot/connector in the back of the desktop unit, and connect the other end to a switch, hub, or router.

With an ethernet cable. (male)

A Top of the Rack or (TOR) switch is a small port count switch that sits on the very top or near the top of a Telco rack you see in Data Centers or Co-location facilities.

Cisco and Brocade as well as other OEM (Original Equipment Manufacturers) describe their new FCoE (Fiber Channel over Ethernet) switches to be "Top of the Rack" thus differentiating them as being small low-cost low port count switches easy to deploy and manager etc.

Technically no.

WEP refers to a form of encryption used in wireless networks that is usually set with a password. For all intents and purposes, the encryption key used for the wireless network is the password for that network.

A WAN is a wide area network that encompasses several smaller Local Area Networks onto one network.

Open windows Media Player with Zen V Plus connected, click on Sync at top (I have Windows Media Player 11), on left side double click My Zen, click on Playlists. If you add your songs/audiobooks by creating a playlist and then synch the playlist, you should be able to right-click the Playlist and choose Delete. Make sure you choose Delete the playlist and it's contents - then click OK. If you do not add items by creating Playlists, you will have to explore everything under My Zen and delete each item referencing the song/audiobook you want to remove. Hope this helps, rv

No, the standard Ethernet cables can have up to 100 meters.

No, the standard Ethernet cables can have up to 100 meters.

No, the standard Ethernet cables can have up to 100 meters.

No, the standard Ethernet cables can have up to 100 meters.

You will need to port forward your xbox. You can do this by going on a website called port forward. From there, you should then choose your router and what you want to port forward, in your case, Xbox live. After, you will see a guide, follow this and you are all set.

A cascaded router because is a router connected to another router. As far as I know, there's two ways you can connect two routers together. One is from a LAN port to the WAN port of the other router and the other is LAN port to LAN port. LAN to WAN is useful for things such as network segmenting, say that you want the LAN of the first router not to be able to see the LAN of the second router. That can work. Whereas with the second way, the second router pretty much becomes a switch and you can have access to devices on both networks without the need for port forwarding. Consider it acting as a swithc with a IP address pretty much. However in this method you have to make sure the LAN IP of the second router is within the same subnet as the first in order for this to work. So let me give you a example of how it can be setup:

LAN to WAN:

Router A

WAN IP: Issued from ISP (Usually through DHCP)

LAN IP: 192.168.1.1

Subnet Mask: 255.255.255.0

Router B

WAN IP: Issued from the DHCP server of the first router or can be statically set to be a address within the first routers LAN

LAN IP: 192.168.2.1

Subnet Mask: 255.255.255.0

Note: With this method, computers on Router B can connect to devices on Router (including the router itself) but not vice versa. Also...you cannot access computers via NetBIOS names (computer names) in this setup. You have to access them by their client LAN IP

LAN to LAN

Router A

WAN IP : Issued from ISP (Usually through DHCP)

LAN IP: 192.168.1.1

Subnet Mask: 255.255.255.0

Router B

WAN IP: Not used since nothing is connected to the WAN port

LAN IP: 192.168.1.254

Subnet Mask: 255.255.255.0

Hope this helps you out. :)

difference between locking and fixed hubs is fixed hubs are driven the whole time this means that the axles and hubs turn as the wheels turn these are engaged at the transmission when needed locking hubs are free wheeling hubs, and when not locked the wheels will turn but the axles are not turning some have a switch inside cab to lock them, some you have to get out of vehicle and manuelly lock the hub at the hub these hubs when unlocked will not drive when transmission is engaged,

This question is vague, but I'll assume you want to hook them together. That is called splicing.

There are eight color coded strands in the typical CAT5 ethernet cable. For a straight through (typical) cable with RJ-45 connectors, simply match up all the colors. For a crude splice you can simply twist quarter to half inch lengths of bare wire together, then individually wrap each with electrical tape. Don't expect this to work well over long distances--CAT5 cable is specially shielded to prevent electromagnetic frequency interference (EFI).

To make a crossover cable (connecting switches, etc.) you must reverse pairs. You should be able to find wiring diagrams on the internet. I have spliced cables that worked just fine, and I am no electronics expert.

They also make RJ-45 couplers, which sell for $2 or $3 each. That is the easiest way to connect cables in an office environment.

That would be considered stealing their internet and that's against the law.

If you mean wafer an agate, it's just a thin slice, which is cut by a diamond saw, then polished.

No. Make a new account. if that doesnt work go to youtube and find a video of how to change ur ip address and then do it that way.

Another reply: Yes, it might ban the IP address for more serious offenses.

Xbox 360

Pendrive is not a input device nor output device IT is STORAGE DEVICE. storage device, only data can be saved in pen drive.

to protect a computer or network from unauthorized access

This is a class C address, for network 217.5.97.0

You can trace the location of this IP address from: http://www.ip2location.com/217.5.97.137

IP Address: 217.5.97.137

Country:GERMANY

Region:BERLIN

City:BERLIN

Latitude/Longitude:52.517/13.4

Time Zone:+01:00

Net Speed:DSL

ISP:DEUTSCHE TELEKOM AG

Domain:T-DIALIN.NET

IDD Code:49

Weather Station:GMXX0007- BERLIN

There is no difference; Ethernet is Ethernet, regardless of where it is deployed.

Networks are places with online services for personal accounts that are signed up.

These networks has unlimited space for IDs, think of it as a infinite world full of IDs floating around filled with online information in each personal ID, there are millions and millions of personal accounts in the online networks. Each of the networks are dedicated, every manufacturer (Microsoft, Sony, Nintendo, Apple ;etc) has its own dedicated online network. Every network has a certain infrastructure of online services but the storage for IDs and data inside the IDs is unlimited and same kind of storage for every network. Each ID for networks are personal and shouldn't be shared, even by just two people.

yes but you really don't need the wifi usb connector if you have a wireless hotspot in range fo your home just head to wii settings click the right arrow click the internet options clik connection 1or2or3 what ever then click wireless connection then click search for access point then click search accesspointand ull probably find your access point