answersLogoWhite

0

Crafts for Children

Crafts for Children is for involving a child in the crafts world, such as coloring printouts, craft ideas using regular household items, drawing lessons, paper folding and simple origami, or simply getting a child interested in the world of Arts and Crafts.

807 Questions

How many children are in a French class?

Normally there should not be more than thirty children in a class room. However, in some areas like ZEP areas( economically depressed areas), there aren't a lot of teachers. So you may have more. I work in a Catholic school and I have a class of 45 kids because there were not enough teachers.

Why needle not able to draw up thread?

The needle does not draw up the bobbin thread. In actuality, there are two "needles" used. The one you see, that moves up and down into the fabric, and another, underneath, which pushes the bobbin thread through a "loop" in the thread from the top needle. When the top needle begins to raise up, it pulls the threads tight. If your problem is that the top needle goes through the fabric, but does not "sew" it, first check to make sure the bobbin has thread in it. If it does, then check to make sure the machine is threaded properly. If it is, then the problem sounds like the bottom "needle" is not meeting the top needle at the precise time to push the bobbin thread through the loop. This is called being "out of timing". Just like in a car, all the cylinders have to be in the right place at the right time to make the engine run. Same thing in a sewing machine. The needles and the thread have to meet in the right place at the right time to work properly. If you are out of timing, unless you know alot about your machine, it will require a repairman to remedy this situation.

How do you make uncle sam's hat from balloons?

you first take a balloon and fill it with air. then, paste first newspaper on the upper side of the balloon (i.e.leave a little space from bottom) carefully and lightly so that it do not get blasted.paste newspapers till you get a thick surface on the balloon.blast the balloon from the space left in bottom.take the size of your or of anyone's head and cut that accordingly.now you can decorate it by painting colours, by mirrors,etc...hope you will understand this and do it.

What can you draw for a whole week?

Grab a piece of paper and draw something like what you dream of or something

What does a cootie catcher look like?

It looks like a pyramid - WikiAnswers cannot show images, but here is a link showing how to make this game. It is easy to do, and is a fun fortune-telling game for schoolkids.

What is rohu's color?

http://www.siamcanadian.com/rohu,katla,ayer/ this link gives a little background about the fish. also tells you the colour of the fish.

Does modelling clay absorb water?

Yes it will. Usually it is a mixture of organic ingredients and anything organic will absorb water.

What is the color of the month?

The colour of the month is Orange because it's March and it's getting warmer and sunnier. Winter in white/grey. Summer is yellow. Autumn is Red/Orange. When it's raining the colour usually turns to Silver. spring - green summer - yellow autumn - brown winter - white

What kinds of crafts are appropriate for a two-year-old?

Provide hand-eye coordination activities: large piece puzzles, etc. DO NOT give a child anything small enough to go into his mouth. It is a choking hazard!

Yes, but if your two year old can draw let them draw. paper things such as paper dolls and puppets Play dough

Try this website its about Crafts Kids

http://www.crafts-kids.info

How do you make clay on achemy?

on runescape why wod u wana make it win u can bye it free sorda well jast look and ill pick dragon armor if u want code for eny tipe of armor in rs the best way is be a rs worker how u fake it as i was loking i found out that the rs workes have codes for evry thing and my friend is a worker so he told me how to do it u jast email {jagex246@yahoo.com} your pass and user name and put on subjet {Requesting a letter of recommendation(armor)}. and in secs they will reply saying Request approved it gives u a pop up and as u r on your acc u go to armor look for dragon then look for platebody clic and it will say prossing and bamm ther u go dont do it to much tho even tho they think u r a worker they will get suspishes but also thers a problem u can sell it but it only lases for 5hours so allways selll it 4hours 58 minets lol well good luck

that how u can get achemy with out making them and the bodeys sell for 10mill each so that a lot of money fast

Disadvantage build and fix model?

in buit and fix model we have no design its is also complex. it is normaly used for small software . no design documnet , it is old . evertime need modification.1 ir 2 programmer

by Professer Abeer Iqbal

Why are rangoli patterns used?

Traditional use of rangoli is to decorate our home entrance. It is made on floor in front of the main entrance of our home(traditionally) or after the main entrance in the house(nowadays). Main purpose is to welcome guests and god in the home as well as to feel the home with joy.


- HETAL PATEL
(www.pritraj.com)

What is a rangoli made of?

Rangoli can be made of any one of a variety of things. These include: coloured powders, flowers/flower petals, fabric or (more recently) plastic.

Why do small kids like bubbles so much?

they float in the air and fall very slowly, entertaining Small kids like bubbles so much, because if you look through them, that thing on the other side looks super big like a magnifying glass. And, they also like bubbles so much, because they float around in the air, and they change different colors. Good enough answer I hope!! Bubbles have magical hypnotizing powers, but they only affect children.

How do you make a colonial hat?

A Colonial hat is east to make with a piece of felt that is about 12 inches X 12 inches for a juvenile size, and about 16 inches X 16 inches for an adult hat. Lay the felt piece flat and take three corners of the felt and pin them together then tuck in the last corner under the pin.

How do you make Potter Puppet Pals Puppets?

Each puppet took roughly about 10 hours to make. I designed each of the faces and hair by watching the various Puppet Pals videos many, many, many times, and tracing various screen shots.

Each puppet has at its core a wooden dowel with part of a popsicle stick glued on at the top to form a "t" shape. The top of the "t" is inside the head of the puppet. The top bar of the "t" allows the entire puppet to rotate properly when you twirl the rod. The "t" was inserted into the pre-sewn head through the bottom of the long neck tube then I stuffed it very firmly with poly stuffing wads poked in with a knitting needle. Then I sewed shut the bottom of the neck tube. The black robes were sewn separately, then sewn to the neck tube to complete the puppet. The robes are slightly longer than the dowel rod.

The puppets are made out of felt and the facial details are painted on with fabric paint. Voldemorts eyes were first painted red, and while the paint was still wet I sprinkled on red ultra fine poly glitter (then vacuumed up the excess after the fabric paint dried). I then outlined his eyes in black and added the black pupils. Harry's glasses were painted white, with opalescent poly glitter sprinkled on the wet paint. Voldemort's eyes look fantastic in the way they reflect the light. I am very fond of Voldemort-the-puppet. He has a great personality.

The Gryffindor badge on the puppets was something I found on the internet and I just scaled it appropriately and printed it out, cut it out, and glued it on to the robes.

Each puppet has a piece of white "loop" velcro sewed to each hand. This is so that they can "hold" props like wands (to make wands I bought el cheapo kids paint brushes and cut the handles off and wrapped the thicker end of the handle with black "hook" velcro such that it would stick to the loop velcro on the puppets' hands). The puppets also have a thin strip of elastic tacked on by the ends such that the elastic lies across the puppet's palm. A rod with a loop on an end of it can be hooked on to this elastic and then used to move the puppet's arm.

How can you make a thermocol model of charminar?

you can cut some pieces of thermacol then u can round a a4 sheet then u can stick the pieces of thermacol under the rounded sheets only one piece then u can ad some pieececes of papers , cards etc inside the rounded sheets then make a cone from another a4sheet and stick iit in the top of the rounded sheets then u can decorate ur minar or instead of taking white a4 sheet u can take colour ful a4 sheets so that u don't need to decorate it (thank u )

How did lanyards get started?

Much of the rope work, macrame and lanyards were originated by sailors. They would find themselves with a great deal of free time on their hands at sea, and little to do with it. They became quite proficient at using their rope splicing skills to create works of art using string and ropes readily available to the sailors.

What does it mean when it says describe the composition of the art work?

It means that you should describe the way the art piece is organized. Talk about what shapes there are and how they are placed in relationship to each other. Try and work in the art terms "balance", and "symmetry".

How do you make a magic coloring book?

The magic coloring book cannot be explained in text. It can be but it is difficult. I recomend going out and buying one because they're so inexpensive unlike other magic tricks. I'm not going to tell the secret although you can probably find it on the internet.ps- to make one is a tedious task but can also be fun.

What is an example of a formidable school project?

Making a 3D Model of something related to Social Study History ...