0
Electronics
Electronics are a branch of technology and science that deals with the control of the flow of electrons.
3,725 Questions
Open settings, then select 'General', then 'Reset'. Finally tap 'Erase all content and settings'. This will restore your whole iPad.
No not all AC adapters are the same.. Some require different voltages and expel different amounts of current and voltage. For example if you break your phone charger and buy a "bootleg" replacement and it possible that it doesn't charge your phone battery properly and will in turn possible ruin your battery.
Do you keep your warranty after removing jailbreak?
Assuming you are referring to an iPhone, yes. Once the phone has been restored to a stock firmware (removing the jailbreak), there is no way to tell that the iPhone has ever been jailbroken, and no way to tell that your warranty has been voided, so Apple will be happy to take it in.
Why are diva lamps called diva lamps?
Because diva is a French word which means it only cost $2.50 and that is why you eat too much cheese on your bread and have a muffin top :3
What does solder mean in electronics?
Solder is a method of attaching components to be electrically conductive to another component or circuit board by the melting of a lead alloy that has a rosin core. The rosin core which resembles a paste which melts to a liquid when it is heated with the lead solder that resembles as a thick wire on a spool. The rosin then flows on the conductors while the lead melts and cleans the conductors so that the lead forms easily and creates a firm bond to the conductor. Hand soldering may involve a soldering iron or a soldering gun. In a manufacturing facility the circuit board moves along on a assembly line and then briefly dipped on the bottom half of the board simultanously soldering all of the components all at once. This method is used on most electronic equipment in use today.
-------------------------------------------------------------
The rosin is also used to limit oxidation of the component lead or PCB pad whilst it is being heated. Oxidation can reduce the conductivity of the solder joint.
Cable XSSN systems is newly discovered by a scientist named Michael Andrilo Parreno a genius student. It is a sytem that enables the user to get all the channels available in the television. Michael Andrilos invention is not successful, but when Dr.Klyn Pio Calunzag help him the invention has become successful, has developed and become favorite of people in connecting in channels.
How do you change your Kindle to show page numbers instead of the locations thingy?
I don't believe that you can change it, but I am trying to find our
How do you get on Internet with iPad?
It depends what kind of Ipad you have. If you have a 3G compatible Ipad then you have to pay for a data plan and get a micro sim card in order to access the 3G.
However, regardless of your Ipad model you should be able to wifi. You can enable your wifi by
1) Tap settings on the main home screen menu
2) The second option should say wifi, so tap on it
3) in the Wifi menu make sure you have wifi switch on
4) under choose a network make sure your network is chosen and that you've put the password in if you have one
5) After this your wifi should be enabled. You can tell because on the top left hand screen the wifi logo should appear blue. If its not you are not connected to the internet yet.
If you still can't get the wifi to work I would check with apple to make sure your Ipad is working properly in the store. If its still not working at home call your service provider, because most likely you are entering in the wrong password
Alternately you can access the wifi menu by
1)tap settings ont he main homescreen
2) tap the general icon
3) tap network icon in the general menu
4)Go to the bottom of the page and tap wifi
5) now you can enable wifi and put your information in
How many miles does a radar cover?
Radar can scan the surface or the sky in all line-of-sight directions; and the maximum distance depends on the latest technology. The AN/SPS-30 air search radar used onboard aircraft carriers, such as the USS Oriskany during the Vietnam war, tracked aircraft at a distance of 300 miles.
According to a 1994 declassified Central Intelligence Agency report, radar was first used by the soviets to bounce a signal off the surface of the moon. The CIA report states: "A typical signal received via Moon Bounce is more than a million billion times weaker than if it were received in an airplane ten miles from the transmitter."
In 2006, NASA reported that they (using an antenna, three-quarters the size of a football field) "sent a 500-kilowatt strong, 90-minute long radar stream 231,800 miles to the Moon."
You will have to either contact Sharp and purchase a new base, or you can try purchasing a new base on Amazon.com for your TV.
If you use Amazon.com, you will need to be very careful to make sure you are getting the correct base unit for your make of television.
True or false a high resistance between the collector and emitter when a transistor is switched off?
yes , it has high resistance between collector and emitter on the off state.
What are the different parts of stand fan?
Parts of the Electric Fan
· Front Guard. It is a protective metal mesh wire used to prevent the fan
blade from any physical contact with foreign objects.
· Power Controller. It is a circuit that controls the amount of power supplied
to the motor.
· Sensor. It is the input receiver that detects input signal coming
from remote control.
· Manual Control. It is a push button switch that controls manually
operation of the electric fan.
· Non-polarized Capacitor. A low reactance non-polar capacitor connected in
series with the start winding of an electric fan.
· Timer. It is used to switch on or off automatically with
predetermined time.
· Comparator. It is a processing circuit that accepts the input signal
coming from remote control, manual switch or timer switch. This circuit provides the triggering voltage to the power controller.
· AC Motor. It is rotating electric machine which changes applied
electrical energy or power into mechanical output energy or power.
· AC Plug. It is a connector intended for connecting to the main
source 220 V.
PROCEDURE IN PREPARING AN ELECTRIC FAN
1. Once the specific electrical/mechanical problem is located;
· Consider the techniques for the proper removal of the detective component or parts.
· Anticipate what to do if the replacement part does not correct the problem.
· Check the installation of the replacement or original part for any improper mounting in the mechanical assembly or circuit board.
2. Examine carefully the mounting of the replacement of original parts of the system.
· Check the placement of the wires or loads of the replacement component
· Consider significant factors used in the original installation such as insulating washer, silicon grease and locating mark for pin connections
· Observe proper placement of the component leads for electrical parts
3. Perform the techniques for the proper soldering of electrical parts.
· Be careful not to damage adjacent components
· Be careful not to lift the copper conductive path from circuit board base material
· Avoid any solder bridges between board path
· Do not destroy the component being removed in case it is still functional and be careful not to damage the component being installed
4. Verify all connections and harness.
· Be sure that all components pre-positioned in a manner that will avoid the possibility of adjacent component short circuit conditions
· Be sure to check or inspect all insulators and barriers between sections after working on any model/brand of electric fan.
· Checked for frayed or broken insulation on all wiring including the AC line cord
· Be sure to replace fuses, resistors and capacitors with special designation such as flame proof to components equal to the original value for both safety and liability purpose
5. Once the repair is completed, perform an AC leakage test on all exposed metal parts of an electric fan to eliminate the possibility of electric shock
· Perform complete retesting of the electric fan to ensure the correctness of the actual repair
· Connect the electric fan into the 60Hz power to allow the time period required to let the new parts settle in and operate as they are designed to work with each other.
· Recheck or inspect if the repair was done correctly and the unit functions properly to ensure successful completion of the repair
6. Clean the electric fan before it would be returned to the customer.
· Be sure that the blade, front and rear guards of the electric fan are properly cleaned
· Be sure that the power cleaning is given to the control panel or switch box of the electric fan.
What does this ic do 8812cpdng4n35?
this ic is a system control ic for a 32 inch color tv vertical horizontal on /off remote control etc and carries 56 pins connected to it xs24Type your answer here...
What do you mean by an electronic to photonic converter?
if you are looking for Photonic converter from electronics that means a device which can convert electronic signal to photonics. photonics stands for application of light whether it may be light generation transmission or processing of light signals.
In the health sector, EHT stands for Environmental Health Technician.
Can PC Tablets connect to Macs?
Yes Tablet computers can connect to Mac computers; details will depend upon the tablet, the operating system and the Mac in question.
The SIM instruction in the 8085 is Set Interrupt Mask. You can use it to set and clear the three interrupt masks for RST7.5, RST6.5, and RST5.5, as well as to set or clear the SOD (Serial Output Data) pin. You can also reset the pending RST7.5 interrupt, if desired.
What is the different between www and the internet?
WWW stands for World Wide Web which basically is a smarter way to say Internet.
