0
Furnaces
The furnace, whose name is derived from the Latin word fornax, which means oven, is a heating device utilized for both home and industrial purposes. Questions about furnaces can be asked and answered here.
1,402 Questions
What is a drip leg and what is it for?
A drip leg is used to catch any debris and condensation in a gas line before it reaches critical components, ie. regulators.
Not only used for gas lines. Can also be installed in steam lines to capture condensation in industrial applications.Yes,at home with a few cautions. First unplug battery,Don'y want to discharge air bags,will ruin your day. Cn't give procedure because you did not tell us Kia what? sporatge,sephia,etc. some are tougher than others,some you should take out passenger seat to keep your back from snapping, others being a contorshunist helps.
What should you do if you put in a new hot water tank but now you have no water pressure?
Call a plumber. Check that you re-opened all the valves you closed.
What is the statute of limitation on property damage in Texas?
can a probation officer change court order curfew hours
How many blast furnaces are present in India?
There are three major integrated steel players in India, namely Steel Authority of India Limited (SAIL), Tata Iron and Steel Company Limited (TISCO) and Rashtriya Ispat Nigam Limited (RINL). Their exact number needs a bit of research.
Who made the Holocaust crematorium furnaces?
They were manufactured by J. A. Topf und Soehne, Erfurt (Thuringia). The firm had a reputation already before World War 2 for making highly efficient crematoria that used very cheap fuel (lignite or 'brown coal').
What happened to the Hebrew Children and the fiery furnace?
The three Hebrew boys were thrown into the fiery furnance as the king had made an golden statue and demanded that all the people should bow down humbly to it but these three refused to do so.
Where was the fiery furnace of Shadrach Meshach and Abednego?
They are identical with Hananiah, Mishael and Azariah, the three contemporaries of Daniel.
Where is the story the fiery furnace found in the bible?
Daniel Chapter 3.
Additionally:
There is also the coming "fiery furnace" that shall be kindled into the "Lake of Fire" of Judgment Day or The Last Great Day of God's plan at the "end of the age" [see Rev.20:11-15]; that's part of Jesus' explanation of His "parables" to His disciples:
"...His disciples came to Him and said, 'Explain to us the parable about the weeds in the field.' 'The sower of the good seed,' He answered, 'is the Son of Man; the field is the world; the good seed is the sons of the Kingdom; the weeds, the sons of the Evil One. The enemy who sows the weeds is the Devil. The harvest is the end of the age. The reapers are the angels. Just as the weeds are collected together and burnt with fire, SO IT WILL BE AT THE END OF THE AGE. The Son of Man will send forth His angels, and they will gather OUT OF HIS KINGDOM ALL HINDRANCES, and whoever practices iniquity, and WILL THROW THEM INTO THE FIERY FURNACE. There will be weeping and gnashing of teeth.'" (Matt.13:36-42 MNT Montgomery New Testament)
And the "parable of the net": "...the Kingdom of Heaven is like a net that was cast into the sea and gathered fish of every kind. When it was full they hauled it upon the beach, and sat down and sorted the good fish into baskets, but threw the worthless fish away. So it will be at the end of the age. The angels will go forth and separate the wicked from the righteous, and FLING THEM INTO THE FURNACE OF FIRE.'" (verses 47-49)
How did king Nebuchadnezzar recognize the fourth man in furnace?
Shadrach Meshach and Abed-Nego said to Nebuchadnezzar their God would save them if they were put in the furnace - Dan 3:17. Nebuchadnezzar didn't really know that the person was God but he reasoned it was someone - angel etc - from God.
Compare these different translations:
Dan 3:25 "Then why do I see four men walking around in the fire?" he asked. "They are not tied up, and they show no sign of being hurt---and the fourth one looks like an angel." - Good News Bible
Dan 3:25 He answered and said, Lo, I see four men loose, walking in the midst of the fire, and they have no hurt; and the aspect of the fourth is like a son of the gods. - American Standard Version
Dan 3:25 He answered and said, Behold! I see four men loose, walking in the middle of the fire, and there is no harm among them. And the form of the fourth is like a son of the gods. - Literal Translation.
What is the diameter of submerged arc furnace?
Submerged Arc Furnace is also called smelting furnace. The furnace is called submerged Arc because Soderberg(Carbon) Electrodes are , buried inside the charge mix. Though Arcing is there but can not be seen. This Furnace is used for producing Ferro Alloys,Pig iron,Silicon metal, Calcium Carbide, Ferro Silicon,Ferro Chrome, Silico Manganese
What is the most cost efficient water softener?
vinegar /soda if you're looking for a homemade solution most people purchase a water softener that removes calcium/magnesium from the water before it enters their home or hot water heater to protect their plumbing, appliances, faucets and fixtures. purchase price, operating costs, and shelf-life should be taken into consideration to determine which is the most cost efficient. if a consumer buys one with a cheap purchase price, but it only lasts one year, it's not very cost efficient (or environmentally friendly) to replace it every year. cost efficient systems include kinetico and culligan (both top-rated by industry specialists)
What is the use of reactor transformer in furnace?
Stabilise the arc and optimize the operation of the furnace.
How many watts can you run in 20 amp?
20 Amp * 120 Volts = 2400 Watts 2400 Watt * 80% max use = 1920 Watts planned normal usage for a circuit with a 20 Amp breaker.
Is the furnace an internal or external combustion engine?
An ordinary furnace is not an engine at all, because it does not directly cause mechanical motion. The heat or expanding gases released in a furnace can be used to drive an engine, but that is a separate component from the furnace. If a furnace is used in this manner, the engine is an external combustion engine.
Can an oil fired furnace be run off a generator?
If you have an older one with a standing pilot light, one that is on all the time, you probably can. I've been told that the newer ones with electric ignition are a problem. They have electronic parts that don't like generators and will short out the circuit boards. This is from a Heating and Air guy so I tend to believe it.
How nut coke is charged in blast furnace?
According to steel.nic.in; Coke Rate is measured in Kgs of BF Coke consumed per tonne of Hot Metal produced in the Blast Furnace(Kg/THM). By convention, this excludes coke (nut/pearl coke) mixed with sinter etc.
Introduction of high quality coke to a blast furnace will result in lower coke rate, higher productivity and lower hot metal cost. This principal is followed by many private chemical firms like Coke Oven Consultants and so on.
Why does the furnace kick out the breaker?
The only reason the dryer breaker will trip is it senses an overload or a short circuit on the circuit. To test this unplug the dryer and see if the breaker will stay latched. If it does then the wiring to the receptacle is not at fault. If you want to delve further into the problem, leave the dryer unplugged and remove the inspection panel at the back of the dryer and check the connections. Sometimes the screw terminals become loose and corroded and cause the dryer to draw more current. To compensate for the higher resistance at the faulty terminals the dryer will try to draw more current that the breaker will allow. If everything looks good after trying both of these things it is time for a repairman to come in and look at the dryer itself, as the fault is probably an internal problem within the dryer body.
What is the volume of a blast furnace?
Useful Volume of Blast Furnace is the volume of the furnace from the throat level to the level where the taphole is placed. This is known the way basically because that is the region where the useful products from Blast furnace are present.
What size home standby generator do you need for a 4500 square foot house?
A 22-27 kW home standby generator would generally be suitable for a 4500 square foot house. However, factors like energy usage, appliances, and climate can impact the recommended size, so a professional assessment is recommended for accuracy.
Who Invented the Steam Generator?
The invention of the first steam-boiler furnace, as well as subsequent improvements upon its design, is credited to Granville T. Woods. He is notable for being the first African-American to successfully establish himself as a professional inventor and engineer in the 19th century.
What is made in a blast furnace?
Several things come out of blast furnaces. They are listed here: 1) A molten version of whatever material was put in it to begin with, 2) Incredible heat, 3) Powerfull light, 4) A waste gas and usually some slag remnant of the fuel that powers the furnace.
Where is the largest blast furnace in the world and how big is it?
As of mid-2012 the largest blast furnace in Europe was the one at Duisberg, Germany, which is said to be about 90 metres tall. Please see the link.
How is slag collected from a blast furnace?
iron is collected from blast furnace by drilling the taphole.Taphole is a hole drill and plug after cycle of time located in blast furnace bottom.
What is difference between Cupola furnace and blast furnace?
In essence nothing, a Cupola furnace is a type of blast furnace in that it is charged at the top and tapped at the bottom and air is blasted into the furnace via a wind belt and tuyres.
A blast furnace in a steel works is a huge structure operated for long periods of time, it is charged with iron ore, coke and limestone and reduces the iron ore into pure iron.
A Cupola furnace, as used in the foundry re melts pig iron, from the blast furnace, along with foundry scrap, steel scrap and scrap iron engine blocks and produced iron alloys of various specifications. A Cupola furnace is usually operated on a daily basis but some types can be continuously operated for several weeks
