0
Iver Johnson Firearms
Iver Johnson is a US-based company that manufactured firearms from 1871 to 1993. The company was credited for producing the hammerless “safety automatic” revolver, a revolver lacking the traditional pull-back hammer.
998 Questions
Where can you find a complete working bolt for an Iver Johnson 22 safety rifle model X?
707 gun shop inc. in Myrtlebeach,S.C. has a working parts gun. contact them at 843-650-7468 ,10 am to 6 pm mon-fri.
How old is a Winchester Model 94 with serial number 197863 and what is its approximate value?
Built in 1900. Value depends on the exact configuration (rifle or carbine), special order features, and CONDITION.
Where can you get parts for Crescent shot guns?
You can get some double barrel parts from GUNPARTS. com
How do you tell when a Remington Model 514 was made?
I think since most were manufactured before the GCA of 1968 they did'nt have S/N so it's hard to say when they were made. After 1968 they are supposed to have a serial number On the left side of the barrel just forward of the receiver you will find two letters stamped into the steel. With that information we can decipher the date of manufacture. sales@countrygunsmith.net
Check e-gunparts.com I checked and they do have the forearm but you have to go to the bottom of the parts list because it is not illistrated. Not sure if its a 1948 or older.
What is the age and price for an Iver Johnson Arms 20 gauge bore barrel lug in one 81485C?
Says on side I /J Arm&Cycle Works
What is the age and value of a 32 caliber Iver Johnson serial 5235 with a 5 inch barrel?
There were 3 models of the IJ revolver, and in each different model, the s/n was repeated, so that without seeing the gun and identifying its variation, we cannot know if it is 1st Model, 2nd Model, or 3rd Model. Additionally, the later IJs wer prefixed with a letter, so yours must be an early one. A publication entitled Iver-Johnson Arms & Cycle Works Firearms 1871-1993 has a list of most serial #'s with dates of production, published by Gun Show Books Publishing. There were three main models of Iver Johnson "Safety" topbreak revolvers. 1st & 2nd Model revolvers were built for black powder cartridges only. Continued use of higher pressure smokeless in these revolvers will result in them shooting loose, getting out of time, and parts breakage. The 3rd Model was especially beefed-up, redesigned, and "fortified" for use with smokeless powder and is fine for modern factory ammo. Alas, only 1st (all) & 2nd (some) Model revolvers fall into the legal Antique category. 1st Model (1894-1896): SINGLE-POST top latch; leaf springs; cylinder "free-wheeling" when at rest 2nd Model (1897-1908): DOUBLE-POST top latch; leaf springs; cylinder "free-wheeling" when at rest 3rd Model (1909-1941): DOUBLE-POST top latch; COIL springs; cylinder locked when at rest If you've determined, from the above characteristics, that you have a 2nd Model IJ revolver, here's how to determine whether it was made before 1899 (and thus a legal antique) or not. Fortunately, Iver Johnson built revolvers by the "batch" system, and only changed & upgraded their guns once a year, so it is quite easy to determine whether an IJ is antique or not, just by cursory examination. In only * one* case (.32 small frame *hammer* model) does the serial number need to be checked. In other cases, you can "tell at a glance" once you know what to look for. Pre-1899 2nd Model guns will exhibit the following characteristics: Large frame (.38) HAMMERLESS: Separate hammer shroud on frame (shroud not integral with frame) Small Frame (.32) HAMMERLESS: Separate hammer shroud on frame (shroud not integral with frame) Note: Integral frame w/shroud introduced start of 1899 production Large frame (.38) hammer: Patent dates on top rib of BARREL Small Frame (.32) hammer: Patent dates on top rib of BARREL, *AND* must check serial number prefix (left side of grip strap underneath grip - yes, you must remove the grips for this one): A = 1897; E = 1898; F = 1899. The easy way to remember: If it has an 'F' it FLUNKS the Antique Test. Note 1: Patent dates moved from top rib of barrel at start of 1899 production. Note 2: All .22 rimfire IJ topbreak revolvers are post-1898 (The .22 chambering began in 1901).
The serial number is hidden on the frame under the grip. Removal of the grips will expose the s/n of you gun,then it can be dated. A great source of information on Iver Johnson firearms is The book "Iver-Johnson Arms & Cycle Works Firearms 1871-1993" by W. Goforth
try www.e-gunparts.com thay can help you find parts
When was an Iver Johnson made?
The company existed with that name from 1871 to 1987. A great source of information on Iver Johnson firearms is the book by W.E. Goforth titled, "Iver-Johnson Arms & Cycle Works Firearms 1871-1993".
What is the manufacture date of an Iver Johnson 38 SW safety hammer revolver sn h 70781?
1926 The first course of action to discern the value of a gun is to identify the make, model, manufacturing date, and variation. The book "Iver-Johnson Arms & Cycle Works Firearms 1871-1993" by W. Goforth may help accomplish this. Then it's a simple matter of looking your gun up in one of the many firearm value books, such as the Blue Book of Gun Values, or the Standard Catalog of Firearms.
What is the value of a 410 Iver Johnson shotgun?
Well, it's going to depend a lot of exactly what type shotgun it is, but the most common IJ is a break-open single shot. Most utility singles go for $35 to $70, but since you have a 410, there are people out there who will pay $150 - $200 for an old used one when they could buy a new one for $90.
When were Hercules double barrel shotguns made?
The guns Hercules guns made by Stevens and sold by Wards were made around 1910 to 1940
On the receiver near the owl stamping there should be a shield with a year in it. For example '85'. Supposedly these carbines were only imported under the Iver Johnson brand name in 1985 and 1986. All others were Erma EM-1's. Erma manufactured both. Look for the stylized Erma on the forward left side of the receiver.
How old is the 12-Gauge Volunteer Single Shot Shotgun with serial number 755742?
i have a 12 gauge Black Bridge single shoot shot gun the serial number is A649620 CAN YOU TELL ME HOW MUCH I CAN GET FOR THIS
Did Iver Johnson produce a 5-shot top break revolver and if so when?
Yes they did. There were a million (1,000,000) Type 2 .38 (1897-1908) top break revolvers made, and I am looking at one on my desk right now. There are no doubt many others.
Additional AnswerThey also made what I believe to be the same model under discussion - the one with the Owl in the grips - in .32 S&W.As far as I know Iver Johnson made .22 break-top revolvers from 1900 to the 1930's and they were all seven shot if there were some five shots made I've never seen one.
Did Iver Johnson ever manufacture a 30 cal carbine pistol?
The Super Enforcer Model 3000 manufactured only in 1985 and 1986 is a pistol version of the US Carbine, 30 caliber, with an 11 inch barrel. It was re-introduced as the Enforcer with a 10 1/2 inch barrel in 1988 and discontinued in 1993. A great source of information on Iver Johnson firearms is the book by W.E. Goforth titled, "Iver-Johnson Arms & Cycle Works Firearms 1871-1993".
Where can you find an operating slide Iver Johnson US carbine 22 model ew22hba?
Parts are very scarce for this 'Erma' of West Germany made gun. Some parts do show up on Ebay.
How do you make a working model of a fire alarm?
- 1 piece of sturdy plywood 1.5 volt alarm or buzzer 1.5 volt battery 4 pieces of insulated wire Spring-loaded wooden clothespin Electrician's tape or glue Paraffin wax Knife Rubber band
Strip the insulation off of the ends of the wires so that the metal is exposed. Connect two wires to the alarm's positive (+) and negative (--) terminals and the other two to the battery's positive (+) and negative (--) terminals.
Secure both the alarm and the battery to the plywood using glue or electrician's tape. They should be spaced apart, but still close enough for the ends of the wires to touch.
Wrap the end of the wire connected to the positive terminal of the alarm to one of the jaws of the clothespin. Do the same thing with the wire connected to the positive terminal of the battery to the other jaw. When the clothespin closes, it should cause the two wires to touch each other.
Cut a piece of paraffin wax big enough to fit between the jaws of the clothespin. Wedge it in place so that it doesn't move, securing it with a rubber band if necessary.
Attach the clip to the plywood using glue or electrician's tape.
Connect the ends of the two remaining wires to each other. At this point, the only thing preventing the connection is the wax. When the temperature gets high enough to melt it (about 120 to 160 degrees F), the jaws of the clothespin will close and the circuit will be completed, starting the alarm.
What years was the Iver Johnson 12 gauge made?
The 12 guage that was my great grandpa,grandpa and my dads is dated 1922 i have one that has the dates 01' on it The company existed with that name from 1871 to 1987 and made 12 gauge shotguns from the beginning to the end.
McKinley was shot twice by anarchist Leon Czolgosz on September 6, 1901.
What is the value of Iver Johnson 410 serial 70456A?
the register comes up with nothing as to that serial no. in a 410 as a match. sorry. this was looked under Iver Johnson arms,inc.
Where would you get parts and a new stock for an Iver Johnson 30 cal Enforcer Pistol?
you can find some parts like a new or used bolt assm. or parts matching the carbine from brownnells.com or cheaperthandirt.com but sorry no luck finding a new pistol stock. (if you do buy a bolt for it make sure you buy the right one there's two types, a flat, and a round and you must use the same type)
