How much does a bucking bull eat?
Like all bulls and cows, a bucking bull eats 2.5% of his body weight in dry matter ration per day.
How long does the average rodeo animal work?
The Rodeo Kind of Works Like A Regular Job...The Steers and Broncos That Do Good Can Live In A Rodeo For A Few Year and Then Most End Up In Pasture Like Retirment or Are Used For Artifitual Incemination For the Next Breed of Broncing Bucks or Stampeeding Steers Because its All In The Genes... But The Ones That Don't Do So Well Can Last For Even Just A Month or 2 Before They Are Most Likily Slaughtered or Put Out To Pasture...Depending If Its A Bronco or A Steer...
How can you easily replace a 2001 Ford Focus 4 cylinder alternator?
First of all, there is no easy way. Secondly which 4cyl do you have? 2.0 Zetec, 2.0 Zetec VCT, or 2.0 SPI?
Is the calf sedated for calf roping?
I have never heard of such, the object is to chase the calf. As quickly as possible, stop the calf, then rope three holves together. Sedating the calf would be cheating both the rider and the judging. Drugging any animal for performance purposes during a competition is wrong and wouldn't be allowed, if known about.
How difficult is it to replace an alternator on a 1994 Oldsmobile 98?
Not that difficult - everything is on the top of the engine. Take the serpentine belt off first, disconnect the wires and attach them to the new alternator in order. Then take the bolts out (they are obvious) and change the alternator - put the belt back on - that's usually the hardest part and your done.
How do you replace the alternator on a 1999 Ford Escort ZX2?
FIRST U Disconnect the NEGATIVE BATTERY Cable then U mark the wires if U have never done one-(with masking tape) the UNbolt the Old Alternator & install the NEW one & make SURE the BELT IS NOT 2 Tight(bearing failure) or 2 loose--- make sure the Battery is Charged UP so as NOT 2 BURN UP the NEW Alternator BY making the ALTERNATOR try & charge a DEAD Battery.
-------ZX2Fast--------
Check 'Related Links' for a how-to on alternator replacement.
How tall are saddle bronc riders?
There is no 'magic' size for saddle bronc riders, but a lower center of gravity (shorter stature) seems to have better luck staying on the required 8 seconds.
How do you replace the alternator on a 1993 Chrysler LeBaron?
You will first need to loosen the serpentine belt in order to remove it from the drive pulley. After that, it is bolted to the engine in 2 locations, which should be rather obvious, then remove electrical connections.
What is the difference between Miss Rodeo America and Miss Rodeo US?
Miss Rodeo America is the official spokeswomen of the Professional Rodeo Cowboys Association. The concept of selecting a young lady to represent professional rodeo began in 1955 when Marilyn Scott of Wyoming was selected as the first Miss Rodeo America. The Miss Rodeo America Pageant is held annually in conjunction with the Wrangler National Finals Rodeo, in Las Vegas, Nevada. In order to compete contestants must first win their state competition. They are judges on horsemanship, personality, appearance, rodeo knowledge & presentation.
Miss Rodeo USA represents the International Professional Rodeo Association the first pageant was in 1966. The Miss Rodeo USA Pageant is held annually January in Oklahoma City, Oklahoma. In order to compete contestants may represent a rodeo, stock contractor, producer, or other sponsor. Contestants are judged on personality, appearance and horsemanship.
How to change 1995 Isuzu Rodeo from 2 wheel drive to 4 wheel?
More than likely you will need a new transmission, a new front axel with differential and a half shaft.
How do you replace the alternator on a 1999 Ford Contour V6?
It's pretty involved. You can follow the instructions from this site. I ended up taking it to a garage and had someone do it because I got stuck at one of the steps. To get the alternator out you have to take apart the entire passenger side wheel assembly. Pieces wouldn't come apart anymore. (Just as a side note, this is the worst car I've ever worked on.) Good luck! http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800a88ca
How do you replace the alternator on a 1980 Volvo 240 GL?
Disconnect battery....... then the screw on terminal goes to battery( thick red wire)........ the green or white goes to Alternator field.........the Black to Regulator -ve......the red or brown goes to reg. +ve.....There should be a plug, its pretty straight forward.
How do you replace the alternator on a 1996 Saturn SL1?
Pull the passenger side tire, and place a jack stand, remove the plastic apron from under the wheel well, and remove the belt, there's two bolts one's easy one is a pain the neck, once you get it loose, you can remove the bolts with the use of a socket and your fingers, take the altnator out through the bottom/wheel well, remove the alt plug and batter connector at that point, and hook up your wires and weather shield before you reinstall. takes about an hour or so to remove 30 mins to go to autozone and an hour to reinstal depending on your kids driving you nuts
Can you stop your neighbors from holding a rodeo if it's a nuisance?
Yes you can call the police and say that your neighbors are disturbing the peace.
How do you replace the alternator on a 1998 Ford Escort ZX2?
The tensioner pulley is toward the front of the car, best reached underneath (I had my car up on ramps when I did the replacement, which was a god idea) - I think it was a 13mm wrench used to move pulley toward the back of the car to loosen the serpentine belt.
I then slid the belt from around the alternator pulley so that the alternator could be removed.
the alternator comes out the top of the engine compartment, but to take it out I had to remove the coolant reservoir, and the wiper fluid container to have socket access to the three bolts that mount the alternator. One bolt is on top, the other two are underneath (looking at the new alternator is a good reference to see where the bottom two bolts are located).
There are also two electrical connectors and the nut-mounted positive cable that need to be removed prior to taking the alternator out.
There is not much room to get the old alternator out, but you will find one position in which the alternator can be removed - keep notice if this, as the new one has to go in the same way as the old one came out.
I did it myself - it wasn't too bad, but having a second person around to move the tensioner pulley while I work the belt would have made life easier.
Who was the founder of the PRCA Rodeo?
The PRCA was founded by not one person, but instead by a group of cowboys. These cowboys were protesting the mishandling of money at the Boston Gardens Rodeo in 1936. They formed a group called the Cowboy's Turtle Association, and the group eventually changed their name to the Professional Rodeo Cowboys Association.
How do you replace a 2001 ford escpae alternator?
you have to remove the passenger's side front tire, rotor, caliper, and axle, trust me it is easier just to get someone to do it. Yes I agree. After you remove the drive axel, you need to unbolt the motor mount and jack up the engine to make enough room to get the alternator out. Also be careful when removing the drive axel, I broke the anti-lock brake sensor as well. Unless you have all of the prober tools in a fully stocked garage, take it to Ford.
How do you replace an alternator on a 2002 Saab 9-5?
I recently replaced the alternator on my wife's 2000 Saab 9-5 sedan. It has a 3.0 liter V-6 engine. I have listed the following steps. !. Remove the negative battery cable from the battery. 2. Loosen the right front wheel lug nuts. 3. Jack up the automobile and place jack stands in appropriate positions. Leave room to access the alternator from underneath the car. 4. Complete removal of the right front wheel. 5. Remove the right front lower splash shield. 6. Release tension on the serpentine belt at the tensioner. 7. Slip the belt off of the tensioner and the alternator. 8. Attach an engine hoist at the front of the engine. This is a transverse mounted engine and the hoist will need to be attached near the engine mount located at the right front fender inner fender. 9. Remove the top portion of this mount. 10. Loosen the rear engine mount at the firewall. This mount is slotted and will permit you to pull the engine forward toward the right front corner of the engine compartment. This will give access to the alternator. 11. Remove the two bolts that attach the serpentine belt tensioner and remove the tensioner. 12. Remove the top alternator mounting bolt. Do this from the engine compartment side. 13. Remove the lower alternator mounting bolt. Do this from underneath the car. 14. Turn the rear of the alternator up to access and remove the electrical leads. 15. Remove the alternator from the engine compartment. 16. Install the new alternator in the REVERSE ORDER.
Tie down roping: Run your horse through the place where you see a piece of rope tied in front of you in the shoot.DO NOT touch the rope or string on the shoot that is a 10 or 5 second penelty.Once your out,rope the calf jump off your horse and tie both back feet and one front foot together.The knot must keep the calf down for 6 seconds. Fastest time wins. Break away roping:Same as tie down but you DO NOT tie the calf or get off your horse.You rope the cow and let go of the rope.You can carry two loops just in case you miss.You cannot make another loop after that. Tie down roping: Run your horse through the place where you see a piece of rope tied in front of you in the shoot.DO NOT touch the rope or string on the shoot that is a 10 or 5 second penelty.Once your out,rope the calf jump off your horse and tie both back feet and one front foot together.The knot must keep the calf down for 6 seconds. Fastest time wins. Break away roping:Same as tie down but you DO NOT tie the calf or get off your horse.You rope the cow and let go of the rope.You can carry two loops just in case you miss.You cannot make another loop after that.
How do you replace the alternator on a Saturn SC1?
JACK THE CAR UP, REMOVE THE NEGATIVE WIRE CABLE FROM THE BATTERY, REMOVE THE PASSENGER SIDE TIRE AND THE FRONT INNER FENDER (PLASTIC). ONCE THESE ARE REMOVED THERE ARE ONLY 2 BOLTS AND ITS OUT. BUT, IT CAN BE FINANGLED THROUGH THE ENGINE BAY WITHOUT REMOVAL OF EITHER BUT ITS A TIGHT FIT.