Scooters and Mini-Bikes

yes, but barely, they tend to have more vegetables and a more healthy crust than hot pockets, but really they're both pretty bad for you.

go to this site; it's what has been saving me with my own scooter.

http://www.scooterfocus.com/scooter_oil_change.html

Raiders from Ireland haha

1-trillion dollars!!!

An average retail price of a scooter from the Scooter Store is around $5,800. The company, however, pushes discounts thru medicare, which brings this average to around $750.

From K.S.A. 8-126. Definitions; located at http://www.ksrevenue.org/taxincent-ksa8126.htm

"(aa) "Motorized bicycle" means every device having two tandem wheels or three wheels, which may be propelled by either human power or helper motor, or by both, and which has:

(1) A motor which produces not more than 3.5 brake horsepower;

(2) a cylinder capacity of not more than 130 cubic centimeters;

(3) an automatic transmission; and

(4) the capability of a maximum design speed of no more than 30 miles per hour."

A two wheeled motorized vehicle must be less than all four of these requirements to not be considered a motorcycle.

The exact location of a Vespa number will vary depending on the model of your scooter. However, it is usually located somewhere on or near the engine.

Italy

1 cc is the equivalent of 1 ml. 50cc = 50ml

my fix for flooded engines is to remove the spark plug, and heat it with a propane torch until it glows ,so that all fuel and deposits burned away.

That's asking for trouble. You are likely to set your scooter and your whole garage on fire. Simply remove the plug and let it evaporate over time. It won't take long, gasoline evaporates very quickly.

use 10 w 30 or 40 does not really matter

Tighten your headset using a wrench big enough, but don't over - tighten or else you'll break the headset.

That's an easy one! Remove the top of the carburetor. Take a small section of fuel line and cut a piece off. About a 1/2 inch will do. Remove the cable from the carb slide and slip the small piece of hose onto the cable and insert it back into the carb slide. Put the top back on and your in business. The hose acts as a governor to control the slide travel and speed.

Some are governed by a mechanism in the transmission, a plate inside sometimes can be removed. Many, like the Honda ruckus, are governed by the CDI ignition module. Replace it with a high performance one. The baja SC50 is governed by horsepower it cant go more than 50mph because physical power restricions. Try upgrading to a performance exhaust, cone type air filter and a CR7HIX spark plug set to .40"

dudes the cost of scooty pept is 34-35 thousand on loan basis it would extend upto 41-42 thousand, its now your choice what you are goning to do.

change the sprockets

You would add 12000cc divided by 50 equal 240 cc or ml of oil.

Cateye

200 to 225 mph

China and Taiwan

The top speed of a Suzuki DRZ 125 is about 45-50 MPH, as it isn’t really based for speed because it is mainly used for leisurely trail riding

how can you make your qlink siena go faster.

measure the length you want make a mark (usually a scratch) where you will cut, cut and when the cutting is done, file the rigid parts of the cut then when its all smooth cut a slit about a half inch on the cut part corresponding to the bars

Create a busy routine, even if it is filled with unimportant things. For instance, every tuesday watch a tv show. Or go to the gym at the same time every day. Constantly having something to do will take your mid off the waiting. I am getting married in 4 months so this is what I am doing:)

I think your asking how to restrict the speed of a 50cc. mini bike, you can do this with the throttle cable, adjust the cable to only open the carburetor 1/2 (half) way. If you mean how to UN-restrict the bike, the usual way is with a throttle stop, simply loosen the cinch nut and back off the stop until you achieve full throttle, and retighten the cinch nut.