How do you get oil light to go off after changing the oil on my Honda TRX420 ATV?
You switch the ignition power switch off, then press the odometer trip button. Hold it down and turn the ignition switch back on. All the time holding down the odometer button for 3-4 seconds. That clears the change oil message and resets the "change oil" interval to "0". So you're good for another 600 miles.
How do you remove the seat on a 2001 Arctic Cat 300 ATV?
Look in the owners manual, or just get down there and see how you would logically remove it (I'm guessing you have to remove some screws).
How much diesel would you need to operate a 5hp engine for one hour?
It depends what rpm the motor is running at and what displacement the motor is
Why does John Deere z445 stall and black smoke comes out?
It sounds like you might have an overfuel problem. Check your air filter for dirt it might be plugged or your choke might be stuck.
Why won't a snowblower stay operating?
Need a bit more info, there are (2) main areas, FUEL & IGNITION. How long will it run for? What action makes it stop ? Nine times out of 10, there is a fuel problem with the carburetor.
Chainsaw oil is thick or rather "sticky" so it will not get thrown off the fast moving chain thereby losing it's lubricating function. Thinning is best avoided.
Yamaha exciter 570 snowmobile starts then stalls then its flooded why?
take off the carbs and clean them out with come carb cleaner. Might be the choke cable sticking, or float bowls level is too high
Yamaha g1 golf cart with a 2 stroke engine How can you disconnect the governor?
How to remove and line up a flyway on G1 golf cart
Horse power is not an indication of speed.
The speed of any vehicle depends on a variety of factors.
What medium through which it is moving. (Air, water, land, space)
The power of the engine.
The weight of the vehicle.
The streamlining.
The gear ratios. (If any)
The efficiency of the system.
My 2001 Skidoo MXZ 700 is 46" from one outside edge of the ski to other outside edge of the opposing ski.
If you have motor rpm motor shaft sizeblower pulley size how you get blower rpm?
Drive Pulley = pulley on motor
Driven Pulley = pulley on blower
First determine your Ratio - divide large pulley size by small pulley size this will give you gear ratio, Example 2" drive pulley and a 4" Driven Pulley = 2:1 gear ratio
If you know your motor shaft RPM divide that number by the ratio to get the RPM of the driven pulley, if your shaft rpm is 1800 rpm you would divide 1800 by 2 which would = 900 rpm on your driven pulley
if your drive pulley is larger than than your driven pulley you multiply the rpm by the ratio example 1800 rpm x 2 = 3600 rpm
How old do you have to be to drive a snowmobile?
First you have to take a class to get your license but in WI the age limit is 12.
Brock Hallet is a daft fellow.
He cannot drive and also has a strange growth under his left arm.
What is the horsepower of a 1993 Polaris Indy sks 440 snowmobile?
I think it's 65 hp. Might be 60, though. Anyway, it's plenty enough for such a light machine (got one).
either the floats are set wrong or the little valve under the float is sticking not hard to fix
How old is a Johnson outboard MODEL MQ-12A?
A Johnson outboard, model number MQ-12A, is a 1966 year model, 9.5 hp.