The Difference Between

A lake's water is deeper than six feet, so no plants can grow at the bottom of the deepest parts. So, you can have a really large pond or a really small lake. It all depends on depth, which also influences temperature. Ponds are more stable; lakes will layer (or stratify). The plants influence dissolved oxygen, which varies in ponds and is more stable in lakes.

http://sports.espn.go.com/outdoors/general/columns/story?columnist=wilson_taylor&page=g_col_Wilson_lake_or_pond_the_answers

Underground springs typically flow in the direction of least resistance, following natural slopes and geologic structures like faults and fractures. The flow can be influenced by factors such as topography, rock porosity, and water pressure.

The 45 RPM records or vinyls sound as they were intended to sound when played at 45 revolutions per minute (at the 45 setting on a record player) while the 33 RPM records sound right at the 33 revolutions per minute speed. Then, there is the issue of size. Records that are 33 RPM are larger in diameter than 45's. Also 33's can hold more songs than 45's do. Usually, 45's have only one song on a side and were used as demo records for radio stations (yes, radio stations used to play music on records before they went to tapes and now to digital music on computers) and for releasing "singles" so that people could listen to a new band without having to pay for a whole album. 45 RPM records or vinyls are recorded at 45 revolutions per minute and are consequently played back at the same speed to achieve exact replication of the original recording. Subsequently, 33 1/3 RPMs are recorded at that speed, and played back at that speed to hear the audio as it was recorded. Generally 45s are recorded on smaller 7" disks, whereas 33 1/3s are recorded on larger, full sized 12" disks. This is not always the case, as some 12" records are recorded at 45 RPM for higher, or audiophile, sound quality.

From a Christian standpoint: The law of time was created by God. We do not know how his existence relates to time because we cannot comprehend not having a beginning. He is able to see into the future but has not predestined each individual's life because he has allowed us to choose our own actions. So where as his purposes will always be realized, we all have our own choice on whether to be part of those purposes. (Compare Isaiah 55:11, Ecclesiastes 9:11 and Deuteronomy 11:26-28)

Not a lot at all. Most mouthwashes can be used as gargles as most have a disinfectant or antibacterial solution, But some gargles are medicated and meant just to be gargled and not to be used as a mouthwash. I would say that Listerine would be both a mouthwash and a gargle, but Hydrogen peroxide (H2O2) would be a gargle only.

Both terms refer to the level of acidity (as measured by pH) being higher than normal (i.e., the pH was lower than normal. Low pH is more acidic.). Acidosis is typically used to refer to the low pH number,b while acidemia relates to the process that produced the low pH number. - Mark R. Bower

Division of labour is the breaking down of production process into seperate stages so that each process is peformed by group of workers.Specialisation is the concentration of productive effort of an individual or group of individual to one particular economic activity

If the object is made of only a pure element or a pure compound whose density you could look up, you could multiply the density of the substance by the volume of the object, then, assuming you are on or near Earth's surface, multiply the product by 9.8 m/s^2.

A Life settlement is generally the sale of a life insurance policy on an insured that has a life expectancy of 2 years or more. A Viatical settlement is on an insured that has a life expectancy of 2 years or less. Contact me at LeveragedSolutions@gmail.com if you have additional questions.

Steam is the gaseous form of water, but it really can only be considered to be fully gaseous when it is in a dry state, as at temperatures below the dry saturated steam line, it will contain droplets of water. Thus at atmospheric pressure it needs to be above 100 celsius to be dry, the required temperature for dryness rises with pressure. The Critical point for steam is at 374 celsius and 220 bar pressure, above this temperature it is supercritical and cannot be liquefied by any further increase in pressure. Thus in summary, steam above the boiling point at a particular pressure behaves as a gas, and above 374 celsius it is a gas whatever the pressure.

Most gases like oxygen and nitrogen have liquid phases at much lower temperatures, ie well below any normal atmospheric condition experienced even in extreme low weather conditions, so we regard them as always gaseous, but actually they also have liquid/gaseous interface conditions, we just don't experience them in practice except in very low temperature work.

In popular terminology 'steam' is what you see rising above the surface of hot water or from the spout of a kettle, but the fact that it is visible is due to the presence of water droplets and in this condition it is not gaseous steam as described above.

The lagrange function, commonly denoted L is the lagrangian of a system. Usually it is the kinetic energy - potential energy (in the case of a particle in a conservative potential).

The lagrange equation is the equation that converts a given lagrangian into a system of equations of motion. It is d/dt(\partial L/\partial qdot)-\partial L/\partial q.

a diamond is nature made from immense pressure over a very long time. A cubic zirconia is man made of a white crystalline substance to look like a diamond. A real diamond will cut glass. The latter will not.

Mass is a measure of the amount of matter in an object, while width is a measure of how broad or wide something is. Mass is typically measured in grams or kilograms, while width is measured in units such as meters or centimeters.

Wavelength is the distance between peaks of a sinusoidal wave.

It is denoted by a λ, and is measured in metres.

The frequency is the time is takes for this to take place. It is denoted by an 'f' and it is measured in Hertz (Hz).

They are linked by the equation frequency x wavelength = speed of light (around 300,000km/s).

Green gram and Black gram are both the species of pulses very related to each other, but these can be differentiated very easily. Black gram differs from green gram by having short seeds, hairy pods, and oblonged seeds. Seed colur vary from blackish to oily colour Black gram is very nutritious so its prize is very high in India and other countries. (MUBASHIR IQBAL)

HPLC UV detector is a component used in high-performance liquid chromatography (HPLC) to monitor eluent absorbance, while a spectrophotometer UV detector is a standalone instrument used to measure the absorption of light at different wavelengths. HPLC UV detectors are specifically tailored for chromatography applications, whereas spectrophotometer UV detectors are more versatile and used for various analytical purposes.

The term hard and soft acid is a qualitative one which refers to the polarizability of the acid (and typically refers only to Lewis acids). A soft acid is one that is highly polarizable, whereas a hard acid is one that is not polarizable.

For more information, and a list of many examples of hard and soft acids, see the Web Links to the left.

Natural features are significant land or water that is not man-made. By definition, natural is existing in or produced by nature; not produced by man or artificial.

Geologically, a formation is a natural body of earth, such as an outcrop or deposit with distinctive and characteristic properties allowing study and mapping of the structure or strata on or below the surface.

A feature is typically defined as related to archaeology and consists of man-made or altered items that are not portable and must otherwise be recorded. For the purposes of this section the archaeological component of 'feature' is ignored and redefined as an easier way of describing formations not so apparent to the typical definition.

Relative intensity refers to the level of effort or exertion required to perform an activity, relative to an individual's maximum capacity. It is often used in exercise science to prescribe and monitor the intensity of workouts based on a percentage of an individual's maximum effort. Understanding relative intensity helps tailor training programs to achieve specific fitness goals.