Wheel Alignment and Balancing

With a three-inch body lift and a two-inch suspension lift on a GMC Tracker, you can typically fit tires up to 31 inches in diameter. However, the exact size may vary based on wheel backspacing and overall vehicle condition. It's essential to check for clearance and ensure that the tires do not rub against the fenders or suspension components during turns and flexing. Always consult with a professional for specific recommendations based on your vehicle's setup.

Walmart typically charges around $15 to $20 for a tire rotation service. However, prices may vary by location and any additional services required. It's advisable to check with your local Walmart Auto Care Center for the most accurate pricing.

No, a 10-inch rim will not fit a 12-inch tire. Tire size is specified by the diameter of the rim it is designed to fit, and a 12-inch tire requires a rim that is 12 inches in diameter. Using mismatched sizes can lead to safety issues and damage to both the tire and the rim. Always ensure that the tire and rim sizes are compatible.

A bad wheel bearing can lead to several serious issues, including increased tire wear, decreased handling and stability, and a potential loss of control while driving. As the bearing deteriorates, it may produce grinding or rumbling noises, and if it fails completely, it can result in wheel detachment. Additionally, a faulty wheel bearing can cause damage to other suspension components and lead to costly repairs. Regular inspections are crucial to prevent these hazards.

The largest tires you can typically fit on 15-inch rims for a 1999 GMC Sonoma are around 31 inches in diameter, which usually corresponds to a tire size of 31x10.50R15. However, it's essential to consider factors such as lift kits, wheel well clearance, and potential rubbing issues when selecting larger tires. Always consult with a tire professional or refer to the vehicle's specifications for the best fit.

In South Africa, the cost of a wheel alignment generally ranges from approximately R300 to R800, depending on the vehicle type and the service provider. Factors such as whether it's a two-wheel or four-wheel alignment can also affect the price. It's advisable to check with local automotive shops for specific rates and any ongoing promotions. Regular wheel alignments can help improve tire longevity and vehicle handling, making it a worthwhile investment.

In Florida, the general sales tax rate is 6%. However, certain counties may impose additional local sales taxes, which can raise the total rate. For a four-wheel alignment, the applicable sales tax would typically be based on this general rate, plus any local taxes specific to the county where the service is provided. It's advisable to check with local tax authorities for the exact rate in your area.

The alignment specifications for a 1974 Chevrolet Nova typically include a toe setting of 1/16 inch to 1/8 inch toe-in, caster angles of +1° to +3° for the left and +0° to +2° for the right, and camber angles of -1° to -2°. It's important to check the specific vehicle's service manual or consult with a professional for precise adjustments, as specifications can vary based on the model and any modifications made to the vehicle.

To ensure new rim lug holes fit your truck, first check the bolt pattern by measuring the distance between the centers of two adjacent lug holes, and then confirm the total number of holes. Additionally, verify the rim's diameter and offset to ensure compatibility with your vehicle. It's also essential to confirm that the lug nut size matches your truck's specifications. Lastly, consult your vehicle's manual or an online database for the recommended rim specifications.

wheel balance is when the wheel is removed from the vehicle and balnced on a wheel balancing machine. an alignment is done with the vehichle as a whole and ur camber and tow is adjusted and aligned

The tread that wears off your tires is left behind on the roads that you have been driving on. Sometimes the wind and rain wash some of it off the roadway... when the highway is resurfaced, the tire slag is removed and the remaining asphalt is roughed up to receive a cap mixture which is designed to adhere to the base, save your tires to the extent possible, and hopefully keep you from sliding off the road.

Poor handling, lowers the cornering G's able to be achieved. The tires will wear out faster on the outer shoulders.

They are as safe as any brand tire. Hard? Don't really know what you mean by the term hard. No auto tire is hard.

If your car wasn't made to fit 20 inch rims, I would recommended using the size your car came with originally. Engineers made it that size for a reason.

Texstar tires are made in northern Texas by a company called Trailstar.

If wheels aren't balanced they'll vibrate when they're rotating at speed. This can be unpleasant and can even increase wear on tires and suspension.

You make sure that all the wheels are pointing in the right direction,

Several items will help with tire wear: *Insure that they are properly inflated according to manufacturer's instructions *Make sure the wheels are aligned *Rotate the tires on a regular basis *Drive with smooth acceleration and stopping. Take turns at a reasonable and safe speed. Squealing and skidding the tires will have an affect on tire wear.

could be transmission damage. At the least the cv axle was probable broken. The cv axle should not bt that hard to replace, but the transmission is a different story.

You have to mount ANY tire . It won't do you much good unless it's on a wheel (rim) -that's what mounting is. Balancing is essential on front tires to avoid high speed wobble and bounce. -On rear tires not really necessary, but preferable.

Yes you can put bigger tires on your existing wheels up to a point. Talk to your local tire dealer and they can advise you on the biggest tires you can use.