0
Windows XP
MS Windows XP operating system that was released for PC computers in 2001
9,737 Questions
When did installation art begin?
Toward's installation is something we found in the artwork from Duchamp readymade.
Can I upgrade windows xp home to windows xp pro?
Yes. Any System that's capable of running windows xp home edition can basicall run xp pro. What you need to do is not different from what was done at the time of loading windows xp home edition... the only difference is that xp pro will need its own product key + activation and it is normally a bit expensive than xp home. Good luck!
Which Startup type must be selected for a service that should run each time the computer is booted?
Automatic.
Is windows xp preemptive or non preemptive?
It uses pre-emptive scheduling. It has what is called a pre-emptive multi-tasking kernel.
How do you write batch file to shut down windows xp?
copy this to notepad:
shutdown -s -t "shutdown time"
and save as shutdown.bat
An example would be:
shutdown -s -t 10
The above example will shutdown the computer in 10 seconds. The number 10 in the example is in seconds and can be changed to any number of seconds you want a delay for even 0 (zero). If a zero is used, there will be no delay and the system will shutdown immediately. Alternatively, if you want to restart instead, you can change the -s for -r. The -t can be omitted, but if it is, the default time is 30 seconds.
How you can connect 2000 to XP?
I am not an expert in IT but here is what I have done when networking the 2000 and XP.
Hardware The most obvious is the hardware requirement. A network card on each machine and a CAT5 cross-over cable to link both machines up.
Assumption: No domain has been setup but only the workgroup.
Software configuration Under XP Professional, you need to run the Network wizard. By following the dialogs and a XP setup disc, the wizard will complete in no time at all. There are a few selection on how you would like the configuration for your network. I think the issue is whether you also want internet sharing as well. Yet this is another matter.
A network bridge would be setup automatically. You can check this by going to Control panel, Network and Internet Connections and Network Connections. Open the Network bridge properties and you would see a setup for Local Area Connection. Goto the bottom dialog and select TCP/IP then click the Properties button.
Select use the following IP address, then do the following: IP address: 192.168.0.1 Subnet: 255.255.255.0 Then OK to leave all the settings.
Under 2000 professional, the most important is the same computer workgroup name as the XP machine. Goto Network and Dial-up Connections. double click on "Make New Connection", select the last point and follow the rest of the instruction. You need to select "Obtain an IP address automatically" under TCP/IP properties and "Obtain DNS server address automatically".
Just to remind you that "File and Printer Sharing for Microsoft Networks" should also been installed on both machines.
Now the setup is more or less completed.
On both machines, open up a command prompt window and do the following:
1. Type in "IPconfig /all" to check the IP address of the both machines. The XP machine should have
Connection-specific DNS Suffix: <none> Description: <your hardware network card name> DHCP Enabled: No IP address: 192.168.0.1 Subnet: 255.255.255.0. Default Gateway: <none>
The 2000 machine should have
Connection-specific DNS Suffix: mshome.net Description: <your hardware network card name> DHCP Enabled: Yes Autoconfiguration Enabled: Yes IP address of 192.168.0.100 (for example) Subnet: 255.255.255.0. Default gateway: 192.168.0.1 DHCP Server: 192.168.0.1 DNS Servers: 192.168.0.1
Then use the Ping command on both machine to check the network is working. The last thing to check is that a network icon is active (ie. flashing) at the right hand bottom of the task bar.
Remember if you want to share you files and folders on your XP machine, remember to place them in Share document folder. Then your 2000 machine can map the drive to see and work on the files.
Sorry a bit long but I suppose it is worth it. Because I am no expert on this subject, there must be a better way than mine and I would love learn from other readers.
How do you change password in deep freeze?
In a Deep Freeze system, a password can be changed by accessing the user's main profile and navigating to "Personal Information", from which you can input your existing password and your desired new password.
Which command can you use to look at the end of the file named statusreport?
Use the command 'head statusreport' (without the quotes)
They are symbols on a computer screen or they can be like little god statues like the Buddha, go on Google type in buddha icon (click images first) go to the third page and click the very first pitchure you see. (in the center left hand corner ^<<) the one next to the pinkish flower. That is an idea of an icon. but that's what i believe.
How do you create an administrators account from a restricted account?
Ignore all " " marks! 1.Go to start and click on run
2.type in "cmd" 3.type in "net users" 4.Type in "net user admin *" and press enter. 5.Now it should say "type a password for the user:". Type it in! Retype it. 6. Log out and log into the admin using the password you changed it to.
You must be using an account which is not limited
I'm not sure about a roll back driver, but you have seen the big dumpsters with rollers at one end. Well, they literally roll off the truck, like a dump truck, only a semi-dump truck, hence the name "roll off."
What is adobe reader 9 used for on your computer?
Many files online, or files you will download, or even things like tax forms, will frequently be in a format with the initials ".pdf " commonly known as an Adobe Acrobat file. If you have Adobe on your computer, keep it - you'll need it eventually.
Split aircon is the best choice for home and it has advantage features.
window aircon is best for small rooms.
Coolcare aircon service provides the such both types of aircon at affordable prices.
Contact us coolcare for more information +65 8712 8795
How can you install a Windows 95 software to Windows XP?
Microsoft included a "Program Compatibility Wizard" with Windows XP for this very purpose. It won't work for all of your games and programs, but it should help with some of them. Just right-click either the desktop icon or start menu shortcut for the particular program, and go to "Properties". As long as it's an executable or a shortcut to one, you should see a "Compatibility" tab. You can change the settings for the individual program there, or follow a link to the help file on how to use the wizard.
How do you install windows7 and windows xp in one PC?
I have accomplished this on my computer because I bought a second hard drive for the purpose of a backup along with additional space. However, the Maxtor hard drive that I bought had a floppy disk that came with it which had several functions ranging from hard drive setup to diagnostics to partitioning and image copy. The image copy feature is what allowed me to take a snapshot of my primary drive and format and copy it to my secondary drive, overwritng any existing files you may I had on it. You do, however, need to be aware that software and system conflicts can arise by running two sets of Windows XP on the same computer at the same time, albeit they're on two separate drives. That's why I prefer to do this ONLY to use the second drive as a backup, not as a supplement. If you need a second hard drive simply to supplement your primary drive for added disk space purposes, I wouldn't recommend putting the full operating system on it. Just leave it as is and use the free space as needed with your primary.
How do you find your computer username and password?
If you are able to login, open command prompt and type in:
net users
and hit enter. this will give you a list of the users that the computer has registered. If you want to find out more about a certain user, type in:
net user (username)
and where the (username) is, just type in the user that you would like to see. For example, a user named Mike. type in:
net user Mike
If you need to change the password, you can type in:
net user Mike *
Just replace Mike with the real user name. Then, it will ask you for a new password. It will not show you what you are typing at all for security reasons. It will ask you to type in the password again to confirm. This will change the password. It should Look something like this:
Type a password for the user:_
Retype the password to confirm:_
The command displays or changes the read-only archive system and hidden characteristics of files?
There are a few websites you can visit to buy Mizuno Menwave Inspire 6. You can purchase them off Amazon.com as well as 33-off.com For buyers in the UK particularly you can check out www.sweatshop.co.uk
Open it by microsoft office picture manager. To get microsoft office picture manager, install any version of microsoft office.
Can a fax be sent from wireless fax printer?
Yes, a wireless "all-in-one" printer can send a fax. Note that the fax printer will need to be connected to a telephone line; only the transmission from your computer to the fax printer is wireless.
Why and when would a user receive a service pack?
Many software makers provide free downloadable updates, sometimes called a service pack, to users who have registered and/or activated their software. With operating systems, the automatic update feature automatically alerts user when an update is available; further, it can be configured to download and install the update automatically.
What your icons are displayed on when you first start up.
How can you clean your laptop computer screen it has sticky stuff on it?
The best way to do so is to spray some Windex onto a paper towel and get it damp (but not so wet that it is dripping) and wipe the screen with that. If you are concerned about potentially scratching the screen (though in my career of nearly 30 years, I have never seen a paper towel scratch a screen), you may use a microfiber cloth.
For some spots that seem to be stuck on so much that you need to let the fluid "soak" for a bit, a trick that I often use is to open the screen to 90 degrees or so from the keyboard and then tip the laptop so that the back lid (the case on the back of the screen) is flat against the table and the other half of the laptop is sticking up in the air. Make sure that the laptop is well-supported in this position, however, since the tendency will be for the "business end" of the laptop to return to the table itself. I generally use a stack of hardcover books or heavier phone books (such as the big thick phone books from metropolitan areas). Spray the Windex onto the stubborn areas and let it sit for a minute or so in order for the liquid to dissolve as much of the sticky stuff as possible, then wipe as normal with a paper towel or microfiber cloth.
My advice is against water, especially soapy water since water tends to evaporate more slowly and therefore can be much more damaging if it does get into the spaces under the edges of the LCD screen. On top of that, soap can leave a residue on the screen that will distort the images that you see.
I hope all this helps. If you have any other questions, feel free to drop me a line.
Where can you download coop forged font?
just look up coop forget download on google and it should be there
