Radio

There should be a fuse in the fuse panel that controls the power outlet. Check the fuse first, then look for a loose wire connection.

Noah Samsara

Plug your turn table into your input sound card (line in on your sound card) Use a program like Nero Media Player, or any digital recording program ( Sound Blaster or Wave Studio) Tell it to save the file as mp3, that simple. Reply from another FAQ Farmer: If you are an experienced Computer user and have a Wave Recording program such as Audacity [free] or Adobe Audition [$$$] youcan do this: 1. Your record player must have a LINE OUT.....usually go from your stereo receiver [YOu can get turntables with internal Line outputs...this is what I have...via ebay] 2. Output from Receiver [turntable] must be the small [headphone like plug...used to be called Sony Plug...now it's the 3/32nd I believe.... 3. plug this into the line in of the sound card....it's the arrow that points INTO the little hole. Now the sound card can read the signal.....but wait...! 4. YOu must enable the little box in the sound card properties called "Line IN"....put the check mark there. 5. How to get to the Properties? Bottom right of screen there should be a speaker ICON....double click that. Then go to File....Properties....record.....then look for the LINE IN....check it. If you don't see it. Then you have to ask someone in person to help you. 6. If you get it working. Great! 7 Now open a recording program and press record....then play the record. You should see a wave file going across the screen. Then save it as an MP3 file. 8. Advanced tip: if you record at a rate of 59594 instead of 44100 then you can play the 33 1/3 speed at 45 RPM and save about 30% time in recording from a record. Then convert back to 44100 and it will be normal speed. I do this on ALL my LP to MP3 recordings... The above is for more advance type computer users.

it depends. Almost every station now has a set rotation of records. Each song is researched and researched to ensure the listeners want for each track. Stations spend thousand of dollars on media test, daily call outs, and also take into account request. They also look at what other stations are doing with other songs. Some stations every watch for crowd response at live events. But the best station programers know their market and use their guts ( rarely happens now with all the big corps owning radio). Stations can have anywhere from 90-200 songs in rotation.

All radio stations play new music. Alot of radio stations however do not play music that is not under a major label. There are many people trying to make submissions for public air time.They are still waiting to hear their voices.Everyday new music is being heard.

Press and hold AS button, enter PIN code, press and hold AS button again

To enter the PIN code, depress the 1 button until you get the correct number. Repeat using buttons 2 3 and 4.

The waves used to broadcast radio signals are called RF waves and these generally lie in VHF and UHF band of electromagnetic spectrum.

Static crackling should not be audible under the following circumstances: 1). On AM radio, when listening to stations that are sufficiently near/strong. 2). On FM radio, anytime. If static is heard constantly, here are some suggestions for the source: 1). Defective fluorescent light or light dimmer nearby. 2). Electric motor nearby with deteriorated brushes or other internal sparking. 3). Radio is defective. Note: Intermittent static crackling during nearby thunderstorms is normal and interesting, especially on an AM radio.

Wfuv 90.7 FM at noon. Or stream at WWW.wfuv.org

kiss fmType your answer here...

Push volume knob? Yeah, you would think, but this radio doesn't have a push button and it doesn't "turn" on either...any other suggestions? thx :)

I always heard that it was Stay by Maurice Willams.

You have to turn on your car for the radio to work

no because children may hear the explict words and will end up saying them

Communication is a major bottleneck in case of any major disaster particularly when the traditional network system already in force break down. In order to strengthen communications, it has been decided that police network (POLNET) will also be used for.

Please see related links page for more information on the subject.

The definition of what it is, is actually in your question. It's a receiver that operates in the radio frequency spectrum. Anything that has a transmitter is said to transmit in radio frequency or `RF`. The term radio is short for radiotelegraphy, which has become generic over the years.

Where does the radio frequency start? Technically, it' at 10,000 hz and higher. That's not to say that there's lower frequency transmitters (The U.S. Gov't uses 2 hz. to reach our submarines when they're under water, but that's more of an exception than the rule. The radio frequency spectrum can extend into the gigahertz range for things such as satellite communications, and as our technology advances, we could eventually see frequencies in the teraherts.

So a radio frequency receiver is anything that will receive a a frequency in the radio frequency range.

Hope this helps,

Cubby

It is Alpine made unit and normally radio comes with security code printed on the code card. Code entry insturctions are provided in the manual.

In case you lost the code card, you can obtain the original code from dealers, but you have to proove ownership and provide the VIN of the car etc.

If you still can't get the right code for your Alpine C33 unit,

J'écoute la radio - I listen to the radio

Radio waves and ultraviolet waves are the same physical phenomenon.
The difference is that radio waves have a much greater wavelength.
(That's equivalent to saying that they have a much lower frequency.)

Your radio and fan may have shoted out or the wrong amps are being used. If there isn't enough amps to run everything. The battery might not have enough juice, or there are wires touching somewhere.

The song name that you are looking for is Dynamite by Tao Cruz

hope i could help :)

sincerely

Mr_avalon_ian

This is an easy one. there are two fuses for the radio. they are both located in the same area. the drivers side kick panel. there's a little door that covers it and the door has all the fuses labled. if your missing the door my only advise for a quick solution is pull the fuses till you find the dead one. Robert Cravens_Robert@yahoo.com

This involves removing the dash panel, and is very complicated and time-consuming. 1. Using a flat screwdriver (or another appropriate tool) pry off wooden and black decorative plastic panels from the dash board. 2. Remove dash vents. 3. Unscrew all dash bolts (do not forget the two bolts facing downwards behind the steering wheel, on top of speedometer and tachometer, and the bolts behind each vent). 5. Remove panels. 6. Now you can unscrew 3 bolts holding the car radio. 7. Pull it out and disconnect the wires from the back.

You will need a flat, phillips and a trox screwdriver.

Any time depending on your mood, like at night if you want to fall asleep or in the morning or day time if you're feeling anxious or just happy. It's probably not the best to listen to it if it's going to distract you from getting work done though.